Service Stream Business Rules | Trade | Linesman

• The applicants name shown on this certificate needs to match the applicants registered name in Onsite

• Install an above ground equipment enclosure (ICTCBL211) to be listed on certificate

• Certificate is to be issued by a Registered Training Organisation (RTO)

• Either black and white or colour copies of certification is accepted

• No expiry date is required to be recorded for this competency

• The Issue date in Onsite should be recorded if date is shown on the certificate. If no date then leave blank 

• The applicants name shown on this certificate needs to match the applicants registered name in Onsite

• Prepare site for support installation (ICTPMG201) to be listed on certificate

• Certificate is to be issued by a Registered Training Organisation (RTO)

• Either black and white or colour copies of certification is accepted

• No expiry date is required to be recorded for this competency

• The Issue date in Onsite should be recorded if date is shown on the certificate. If no date then leave blank 

• The applicants name shown on this certificate needs to match the applicants registered name in Onsite

• Install a cable lead-in (ICTCBL220) to be listed on certificate

• Certificate is to be issued by a Registered Training Organisation (RTO)

• Either black and white or colour copies of certification is accepted

• No expiry date is required to be recorded for this competency

• The Issue date in Onsite should be recorded if date is shown on the certificate. If no date then leave blank 

• The applicants name shown on this certificate needs to match the applicants registered name in Onsite

• Skill 16 - Install / replace above ground cable Fix aerial cable (ICTCBL214) to be listed on certificate

• Certificate is to be issued by a Registered Training Organisation (RTO)

• Either black and white or colour copies of certification is accepted

• No expiry date is required to be recorded for this competency

Alternate Evidence:

A print out of the employee’s NBN enable profile showing their accreditations.

1. Must show persons name and photo

2. Must show the following accreditation course name “Install / replace above ground cable”

3. Action required column showing “Awaiting Practical” or “Complete” for the above course

• The Issue date in Onsite should be recorded if date is shown on the certificate. If no date then leave blank 

• The applicants name shown on this certificate needs to match the applicants registered name in Onsite

• Skill 15a - Basic coaxial cable installs from the tap in - Joint and terminate coaxial cable (ICTCBL209) to be listed on certificate

• Certificate is to be issued by a Registered Training Organisation (RTO)

• Either black and white or colour copies of certification is accepted

• No expiry date is required to be recorded for this competency

Alternate Evidence:

A print out of the employee’s NBN enable profile showing their accreditations.

1. Must show persons name and photo

2. Must show the following accreditation course name “Basic coaxial cable installs from the tap down”

3. Action required column showing “Awaiting Practical” or “Complete” for the above course

• The Issue date in Onsite should be recorded if date is shown on the certificate. If no date then leave blank 

• The applicants name shown on this certificate needs to match the applicants registered name in Onsite

•  Skill 14a - Basic radio frequency testing from the tap in - Use optical and radio frequency measuring instruments (ICTBWN305) to be listed on certificate

• Certificate is to be issued by a Registered Training Organisation (RTO)

• Either black and white or colour copies of certification is accepted

• No expiry date is required to be recorded for this competency

Alternate Evidence:

A print out of the employee’s NBN enable profile showing their accreditations.

1. Must show person’s name and photo

2. Must show the following accreditation course name “Basic radio frequency testing from tap down”

3. Action required column showing “Awaiting Practical” or “Complete” for the above course

• The Issue date in Onsite should be recorded if date is shown on the certificate. If no date then leave blank 

• The applicants name shown on this certificate needs to match the applicants registered name in Onsite

• Skill 13 - Fibre splicing to be listed on certificate

• Certificate is to be issued by a Registered Training Organisation (RTO)

• Either black and white or colour copies of certification is accepted

• No expiry date is required to be recorded for this competence

Alternate Evidence:

A print out of the employee’s NBN enable profile showing their accreditations.

1. Must show person’s name and photo

2. Enable ID must be visible

3. Must show the following accreditation course name “Fibre Splicing”

4. Action required column showing “Accredited” for the above course

• The Issue date in Onsite should be recorded if date is shown on the certificate. If no date then leave blank 

• The applicants name shown on this certificate needs to match the applicants registered name in Onsite

• Skill 12 - Testing and commissioning live fiber to be listed on certificate

• Certificate is to be issued by a Registered Training Organisation (RTO)

• Either black and white or colour copies of certification is accepted

• No expiry date is required to be recorded for this competency

Alternate Evidence:

A print out of the employee’s NBN enable profile showing their accreditations.

1. Must show person’s name and photo

2. Enable ID must be visible

3. Must show the following accreditation course name “Testing and commissioning live fibre”

4. Action required column showing “Accredited” for the above course

• The Issue date in Onsite should be recorded if date is shown on the certificate. If no date then leave blank 

• The applicants name shown on this certificate needs to match the applicants registered name in Onsite

• Skill 9 - Fiber inspection and cleaning  to be listed on certificate

• Certificate is to be issued by a Registered Training Organisation (RTO)

• Either black and white or colour copies of certification is accepted

• No expiry date is required to be recorded for this competency

Alternate Evidence:

A print out of the employee’s NBN enable profile showing their accreditations.

1. Must show person’s name and photo

2. Enable ID must be visible

3. Must show the following accreditation course name “Fibre inspection and cleaning”

4. Action required column showing “Accredited” for the above course

• The Issue date in Onsite should be recorded if date is shown on the certificate. If no date then leave blank 

• The applicants name shown on this certificate needs to match the applicants registered name in Onsite

•  Skill 8 - Card augmentations/replacements on active equip

• Certificate is to be issued by a Registered Training Organisation (RTO)

• Either black and white or colour copies of certification is accepted

• No expiry date is required to be recorded for this competency

Alternate Evidence:

A print out of the employee’s NBN enable profile showing their accreditations.

1. Must show person’s name and photo

2. Enable ID must be visible

3. Must show the following accreditation course name “Card augmentations/replacements on active equip”

4. Action required column showing “Accredited” for the above course

• The Issue date in Onsite should be recorded if date is shown on the certificate. If no date then leave blank 

• The applicants name shown on this certificate needs to match the applicants registered name in Onsite

• Skill 1 - Basic Jumpering at the pillar or the node to be listed on certificate

• Certificate is to be issued by a Registered Training Organisation (RTO)

• Either black and white or colour copies of certification is accepted

• No expiry date is required to be recorded for this competency

Alternate Evidence:

A print out of the employee’s NBN enable profile showing their accreditations.

1. Must show person’s name and photo

2. Enable ID must be visible

3. Must show the following accreditation course name “Basic Jumpering at the pillar or the node”

4. Action required column showing “Accredited” for the above course

• The Issue date in Onsite should be recorded if date is shown on the certificate. If no date then leave blank