Visy Business Rules | Engineering

 Qualifications

CompetencyCompetency RequirementsUpload RequirementsExamples

Engineering.Advanced Diploma.Engineering

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • Recognised Training Institution name to be displayed on document (or to be issued by State Government body)
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
  • Name and / or signature of issuer to be shown
  • Document / Certificate / Number to be shown
  • Completion date or issue date must be displayed
  • No expiry

If an international / overseas issued degree is uploaded as the evidence for this competency: Avetta staff CLICK HERE for additional information prior to file verification

  • The date of completion on the evidence should be recorded as the Issue Date in Onsite



Not Accepted:

  • Fitting and Turning Qualifications

Engineering.Bachelor Degree.Chemical Engineering



  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • Recognised Training Institution name to be displayed on document (or to be issued by State Government body)
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
  • Name and / or signature of issuer to be shown
  • Document / Certificate / Number to be shown
  • Completion date or issue date must be displayed
  • No expiry

If an international / overseas issued degree is uploaded as the evidence for this competency: Avetta staff CLICK HERE for additional information prior to file verification

  • Date of completion to be recorded as the issue date in Onsite
  • The date of completion on the evidence should be recorded as the Issue Date in Onsite





Not Accepted:

  • Fitting and Turning Qualifications

Engineering.Bachelor Degree.Electrical Engineering


  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • Recognised Training Institution name to be displayed on document (or to be issued by State Government body)
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
  • Name and / or signature of issuer to be shown
  • Document / Certificate / Number to be shown
  • Completion date or issue date must be displayed
  • No expiry

If an international / overseas issued degree is uploaded as the evidence for this competency: Avetta staff CLICK HERE for additional information prior to file verification

  • Date of completion to be recorded as the issue date in Onsite
  • The date of completion on the evidence should be recorded as the Issue Date in Onsite





Not Accepted:

  • Fitting and Turning Qualifications

Engineering.Bachelor Degree.Engineering



  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • Recognised Training Institution name to be displayed on document (or to be issued by State Government body)
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
  • Name and / or signature of issuer to be shown
  • Document / Certificate / Number to be shown
  • Completion date or issue date must be displayed
  • No expiry

If an international / overseas issued degree is uploaded as the evidence for this competency: Avetta staff CLICK HERE for additional information prior to file verification

  • Date of completion to be recorded as the issue date in Onsite
  • The date of completion on the evidence should be recorded as the Issue Date in Onsite





Not Accepted:

  • Fitting and Turning Qualifications

Engineering.Bachelor Degree.Mechanical Engineering

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • Recognised Training Institution name to be displayed on document (or to be issued by State Government body)
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
  • Name and / or signature of issuer to be shown
  • Document / Certificate / Number to be shown
  • Completion date or issue date must be displayed
  • No expiry


If an international / overseas issued degree is uploaded as the evidence for this competency: Avetta staff CLICK HERE for additional information prior to file verification

  • Date of completion to be recorded as the issue date in Onsite
  • The date of completion on the evidence should be recorded as the Issue Date in Onsite





Not Accepted:

  • Fitting and Turning Qualifications

Engineering.Certificate II.Engineering - Production Technology

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • Recognised Training Institution name to be displayed on document (or to be issued by State Government body)
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
  • Name and / or signature of issuer to be shown
  • Document / Certificate / Number to be shown
  • Completion date or issue date must be displayed
  • No expiry

Not Accepted

  • Craft Certificate - needs to be uploaded with SOC
  • The date of completion on the evidence should be recorded as the Issue Date in Onsite





Not Accepted:

  • Fitting and Turning Qualifications

Engineering.Certificate III.Engineering - Composites Trade

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • Recognised Training Institution name to be displayed on document (or to be issued by State Government body)
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
  • Name and / or signature of issuer to be shown
  • Document / Certificate / Number to be shown
  • Completion date or issue date must be displayed
  • No expiry

Not Accepted

  • Craft Certificate - needs to be uploaded with SOC
  • The date of completion on the evidence should be recorded as the Issue Date in Onsite




Not Accepted:

  • Fitting and Turning Qualifications

Engineering.Certificate III.Engineering - Production Systems

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • Recognised Training Institution name to be displayed on document (or to be issued by State Government body)
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
  • Name and / or signature of issuer to be shown
  • Document / Certificate / Number to be shown
  • Completion date or issue date must be displayed
  • No expiry

Not Accepted

  • Craft Certificate - needs to be uploaded with SOC
  • The date of completion on the evidence should be recorded as the Issue Date in Onsite




Not Accepted:

  • Fitting and Turning Qualifications

Engineering.Certificate III.Engineering - Technical

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • Recognised Training Institution name to be displayed on document (or to be issued by State Government body)
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
  • Name and / or signature of issuer to be shown
  • Document / Certificate / Number to be shown
  • Completion date or issue date must be displayed
  • No expiry

Not Accepted

  • Craft Certificate - needs to be uploaded with SOC
  • The date of completion on the evidence should be recorded as the Issue Date in Onsite





Not Accepted:

  • Fitting and Turning Qualifications

Engineering.Certificate IV.Engineering

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • Recognised Training Institution name to be displayed on document (or to be issued by State Government body)
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
  • Name and / or signature of issuer to be shown
  • Document / Certificate / Number to be shown
  • Completion date or issue date must be displayed
  • No expiry

Not Accepted

  • Craft Certificate - needs to be uploaded with SOC
  • The date of completion on the evidence should be recorded as the Issue Date in Onsite




Not Accepted:

  • Fitting and Turning Qualifications

Engineering.Diploma.Engineering - Advanced Trade

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • Recognised Training Institution name to be displayed on document (or to be issued by State Government body)
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
  • Name and / or signature of issuer to be shown
  • Document / Certificate / Number to be shown
  • Completion date or issue date must be displayed
  • No expiry

If an international / overseas issued degree is uploaded as the evidence for this competency: Avetta staff CLICK HERE for additional information prior to file verification

  • The date of completion on the evidence should be recorded as the Issue Date in Onsite




Not Accepted:

  • Fitting and Turning Qualifications

Engineering.Diploma.Engineering - Technical

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • Recognised Training Institution name to be displayed on document (or to be issued by State Government body)
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
  • Name and / or signature of issuer to be shown
  • Document / Certificate / Number to be shown
  • Completion date or issue date must be displayed
  • No expiry

If an international / overseas issued degree is uploaded as the evidence for this competency: Avetta staff CLICK HERE for additional information prior to file verification

  • The date of completion on the evidence should be recorded as the Issue Date in Onsite





Not Accepted:

  • Fitting and Turning Qualifications
 Certificate

CompetencyCompetency RequirementsUpload RequirementsExamples

Engineering.Statement of Attainment.Practical hazardous areas for engineers and technicians

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • Certificate is to display course completion of: Practical hazardous areas for engineers and technicians
  • Certificate or Card showing competency title is accepted
  • Must be issued by a Registered Training Organisation (RTO)
  • Black and white or coloured copy of evidence can be accepted
  • The date of completion on the evidence should be recorded as the Issue Date in Onsite

Electrical.Course.ABB ZS1 and MH2 Type Switchgear Operations

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • Certificate is to display course completion of: ABB ZS1 and MH2 Type Switchgear Operations
  • Certificate or Card showing competency title is accepted
  • Must be issued by a Registered Training Organisation (RTO)
  • Black and white or coloured copy of evidence can be accepted
  • The date of completion on the evidence should be recorded as the Issue Date in Onsite
 Statement of Competency

CompetencyCompetency RequirementsUpload RequirementsExamples

Engineering & Design.Statement of Competency.Qualified

The Visy statement of competency form can be downloaded by clicking HERE

  • Applicant name on Statement of Competency evidence to match the name of the registered applicant
  • Avetta Visy Statement of Competency Template to be used
  • All fields to be complete
  • Direct Managers signature to be present (cannot be the contractor)


Note: Company Directors are the only individuals that can sign off their own Statement of Comeptency

  • There is no requirement to record and Issue date or an expiration date for this competency in Onsite
Please download from the portal upload requirement