Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 37
Next »
Licences
Competency | Competency Requirements | Upload Requirements | Example Documents |
---|
Electrical.Govt Licence/Authority.Authorised Service Provider (ASP) Level 1 | - Authorised Service Provider licence to be uploaded
- Applicant name must be displayed on licence
- Applicant name must match the name entered into the system
- Only the front side of the licence needs to be included in the uploaded file
*registration certificate issued by NSW government is accepted | - Record the expiry date as it is displayed on the licence
- If registration letter is uploaded No expiry date required
| |
Electrical.Licence.A Grade – QLD | - Applicants name to be displayed on uploaded evidence and to match applicants registered name
- Licence showing Electrician to be uploaded
- Full licence or restricted licence accepted
- Must be issued by relevant state Government Authority in QLD
- Black and white or coloured copy of the document is accepted
| - Expiry date in Onsite should be recorded as the date which is shown on the Licence
| |
Electrical.Licence.A Grade - ACT | - Applicants name to be displayed on uploaded evidence and to match applicants registered name
- Licence showing Electrician to be uploaded
- Full licence or restricted licence accepted
- Must be issued by relevant state Government Authority in ACT
- Black and white or coloured copy of the document is accepted
| - Expiry date in Onsite should be recorded as the date which is shown on the Licence
| |
Electrical.Licence.A Grade - VIC | - Applicants name to be displayed on uploaded evidence and to match applicants registered name
- Licence showing Electrician to be uploaded
- Full licence or restricted licence accepted
- Must be issued by relevant state Government Authority in VIC
- Black and white or coloured copy of the document is accepted
| - Expiry date in Onsite should be recorded as the date which is shown on the Licence
| |
Electrical.Licence.A Grade - TAS | - Applicants name to be displayed on uploaded evidence and to match applicants registered name
- Licence showing Electrician to be uploaded
- Full licence or restricted licence accepted
- Must be issued by relevant state Government Authority in TAS
- Black and white or coloured copy of the document is accepted
| - Expiry date in Onsite should be recorded as the date which is shown on the Licence
| |
Electrical.Licence.A Grade - SA | - Applicants name to be displayed on uploaded evidence and to match applicants registered name
- Licence showing Electrician to be uploaded
- Full licence or restricted licence accepted
- Must be issued by relevant state Government Authority in SA
- Black and white or coloured copy of the document is accepted
| - Expiry date in Onsite should be recorded as the date which is shown on the Licence
| |
Electrical.Licence.A Grade - WA | - Applicants name to be displayed on uploaded evidence and to match applicants registered name
- Licence showing Electrician to be uploaded
- Full licence or restricted licence accepted
- Must be issued by relevant state Government Authority in WA
- Black and white or coloured copy of the document is accepted
| - Expiry date in Onsite should be recorded as the date which is shown on the Licence
| |
Electrical.Licence.A Grade – NT | - Applicants name to be displayed on uploaded evidence and to match applicants registered name
- Licence showing Electrician to be uploaded
- Full licence or restricted licence accepted
- Must be issued by relevant state Government Authority in NT
- Black and white or coloured copy of the document is accepted
| - Expiry date in Onsite should be recorded as the date which is shown on the Licence
| |
Electrical.Licence.NSW | - Applicants name to be displayed on uploaded evidence and to match applicants registered name
- Licence showing Electrician to be uploaded
- Full licence or restricted licence accepted
- Must be issued by relevant state Government Authority in NSW
- Black and white or coloured copy of the document is accepted
| - Expiry date in Onsite should be recorded as the date which is shown on the Licence
| |
Electrical.Govt Licence/Authority.Authorised Service Provider (ASP) Level 1 | *registration certificate issued by NSW government is accepted
| Expiry date in Onsite should be recorded as the date which is shown on the Licence If registration letter is uploaded No expiry date required | |
Electrical.Govt Licence/Authority.Authorised Service Provider (ASP) Level 2 | *registration certificate issued by NSW government is accepted
| Expiry date in Onsite should be recorded as the date which is shown on the Licence If registration letter is uploaded No expiry date required | |
Statement of Attainment
Competency | Competency Requirements | Upload Requirements | Example Documents |
---|
Electrical.Statement of Attainment.UETTDRRF09B - Apply access procedures to work on or near | - The applicants name shown on this statement of attainment needs to match the applicants registered name in Onsite
- The matching competency code needs to be shown
- Statement of Attainment must be issued by a registered training organisation (RTO)
- No expiry date is required for this competency upload.
| - The Issue date in Onsite should be recorded as the date of completion shown on the statement of attainment
| |
Electrical.Statement of Attainment.ICTCBL2136B - Install, maintain and modify customer premises | - The applicants name shown on this statement of attainment needs to match the applicants registered name in Onsite
- The matching competency code needs to be shown
- Statement of Attainment must be issued by a registered training organisation (RTO)
- No expiry date is required for this competency upload.
| - The Issue date in Onsite should be recorded as the date of completion shown on the statement of attainment
| |
Electrical.Statement of Attainment.ICTOHS2153B - Work Safely Near Power Infrastructure | - The applicants name shown on this statement of attainment needs to match the applicants registered name in Onsite
- The matching competency code needs to be shown
- Statement of Attainment must be issued by a registered training organisation (RTO)
- No expiry date is required for this competency upload.
| - The Issue date in Onsite should be recorded as the date of completion shown on the statement of attainment
| |
Electrical.Statement of Attainment.Electrical Equipment in Hazardous Areas | | - The Issue date in Onsite should be recorded as the date of completion shown on the statement of attainment
| |
Electrical.Statement of Attainment.UETTDRRF09B - Apply access procedures to work on or near | | - The Issue date in Onsite should be recorded as the date of completion shown on the statement of attainment
| |
Electrical.Statement of Attainment.Testing of connections to low voltage electricity networks - UETTDRRF11A | | - The Issue date in Onsite should be recorded as the date of completion shown on the statement of attainment
| |
Electrical.Statement of Attainment.Apply ESI safety rules, COP and procedures for electrical apparatus work - UETTDRRF01B | | - The Issue date in Onsite should be recorded as the date of completion shown on the statement of attainment
| |
Electrical.Statement of Attainment.UEENEEP012A - Disconnect/reconnect composite appliances connected to low voltage installation wiring | - Name on certificate to match the person registered
- Statement of Attainment in UEENEEP012A - Disconnect/reconnect composite appliances connected to low voltage installation wiring to be listed
- Issued by an RTO / Nationally Recognised Training logo
- No expiry
- Black and white or colour is acceptable
| - Only issue date to be recorded
| |
Electrical.Trained.TasNetworks - Instructed Person | - The applicants name shown on this statement of attainment needs to match the applicants registered name in Onsite
- Must be delivered by TasNetworks
- Must display Instructed Person or Instructed Person Refresher
| - Issue date recorded as per the certificate
- Expiry date – two years from issue date
| |
Electrical.Trained.TasNetworks - Person In Charge | - The applicants name shown on this statement of attainment needs to match the applicants registered name in Onsite
- Must be delivered by TasNetworks
- Must display Instructed Person in Charge or Person in Charge Refresher
| - Expiry and issue date recorded as per the certificate
| |
Electrical.Trained.TasNetworks - Level 1 & 2 | - The applicants name shown on this statement of attainment needs to match the applicants registered name in Onsite
- Must be delivered by TasNetworks
- Must display Level 1 & 2 or Level 1 & 2 Refresher
| - Expiry and issue date recorded as per the certificate
| |
Certificate
Competency | Competency Requirements | Upload Requirements | Example Documents |
---|
Electrical.Certificate IV.Instrumentation – Electrical | - Name on certificate to match the person registered (However shortened first names such as 'Chris' for 'Christopher' are accepted)
- Certificate IV in UEE40410 - Instrumentation – Electrical or Certificate IV in UEE40411 - Instrumentation – Electrical to be listed
- No expiry
- Black and white or colour acceptable
| - The Issue date in Onsite should be recorded
| |
Electrical.Qualified.Energy Safe Victoria - Electrical Spotter | - Applicants name on document to match applicants name in Onsite (However shortened first names such as 'Chris' for 'Christopher' are accepted)
- Must list 'Spotter Registration Certificate'
- Must be issued by Energy Safe Victoria
- Must show the Energy Safe Victoria logo
| - Issue date to be recorded as per certificate / card
- Expiry = 3 years from Issue Date
| |
Electrical.Certificate.Electrical Safety in Water Industry | - Applicants name on document to match applicants name in Onsite (However shortened first names such as 'Chris' for 'Christopher' are accepted)
- Document WTR-TR-601B – Electrical Safety Training- Competency Assessment to be attached
| - The Issue date in Onsite should be recorded as the date of assessment
| |
Electrical.Trade.Electrical Fitter (Instruments) | - Name on certificate to match the person registered
- Certificate in Electrical Fitter (Instruments) to be listed
Black and white or colour acceptable Must be clearly scanned and legible Issue date to be recorded No Expiry
| - Issue Date = Date of completion
- Expiry Date = No expiry date to be entered
| |
Electrical.Certificate III.UET30812 - Certificate III in ESI - Power Systems - Distribution Cable Jointing | Applicants name to be shown on documentation Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted) RTO Name, National Provider Code / RTO Number & Logo to be displayed on document Completion date or issue date must be displayed Course code to be listed on certificate to match the nominated coding and title within Onsite Name and / or signature of issuer Document / Certificate / Number No expiry | Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date | |
Electrical.Certificate III.UET30612 - Certificate III in ESI - Power Systems - Distribution Overhead (Linesman) | Applicants name to be shown on documentation Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted) RTO Name, National Provider Code / RTO Number & Logo to be displayed on document Completion date or issue date must be displayed Course code to be listed on certificate to match the nominated coding and title within Onsite Name and / or signature of issuer Document / Certificate / Number No expiry | Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date | |