Versions Compared

Old Version 30

changes.mady.by.user kate Asquith

Saved on

compared with

New Version Current

changes.mady.by.user Marivic.Sumagaysay

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Anchor
ElectricalTAS
ElectricalTAS
Image RemovedImage Added


Expand
titleLicences

Anchor
electricalcontractorlicence
electricalcontractorlicence
 

CompetencyCompetency RequirementsUpload RequirementsExamples
Anchor
ElectricalACT
ElectricalACT
Electrical.Licence.ACT

When Licence is uploaded:

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • ‘Electrician’ or similar to be listed
  • Screenshots from websites are not accepted - Must be copy of the Licence
  • Must be issued by a relevant Australian state government authority  with corresponding logo shown on licence EG ACT Government
  • Black and white or coloured copy of evidence can be accepted
  • Supervisor licence can be accepted for the Electrical Contractor licence

When Invoice (For new contractor Licence) has been uploaded:

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • ‘Electrician’ or similar to be listed
  • Date of receipt to be displayed on the invoice
  • Contractor number to be displayed on document
  • Must be issued by relevant state government authority
  • Black and white or coloured copy of evidence can be accepted
When Licence is uploaded:
  • Expiry Date = The date of expiration on the evidence

When Invoice (For new contractor Licence) has been uploaded:

  • The date of expiration on the evidence should be recorded as the date which is calculated to be 4x weeks from the date of renewal completion
 

Electrical.Licence.NSW

Anchor
ElectricalNSW
ElectricalNSW

 


When Licence is uploaded:

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • ‘Electrician’ or similar to be listed
  • Screenshots from websites are not accepted - Must be copy of the Licence
  • Must be issued by a relevant Australian state government authority  with corresponding logo shown on licence EG NSW Department of Fair Trading
  • Black and white or coloured copy of evidence can be accepted
  • Supervisor licence can be accepted for the Electrical Contractor licence

When Invoice (For new contractor Licence) has been uploaded:

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • ‘Electrician’ or similar to be listed
  • Date of receipt to be displayed on the invoice
  • Contractor number to be displayed on document
  • Must be issued by relevant state government authority
  • Black and white or coloured copy of evidence can be accepted
When Licence is uploaded:
    • Expiry Date = The date of expiration on the evidence

When Invoice (For new contractor Licence) has been uploaded:

  • The date of expiration on the evidence should be recorded as the date which is calculated to be 4x weeks from the date of renewal completion

Image Modified`

Image Modified

Image Modified

Electrical.Licence.NT

Anchor
ElectricalNT
ElectricalNT

When Licence is uploaded:

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • ‘Electrician’ or similar to be listed
  • Screenshots from websites are not accepted - Must be copy of the Licence
  • Must be issued by a relevant Australian state government authority  with corresponding logo shown on licence EG NT Government
  • Black and white or coloured copy of evidence can be accepted
  • Supervisor licence can be accepted for the Electrical Contractor licence

When Invoice (For new contractor Licence) has been uploaded:

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • ‘Electrician’ or similar to be listed
  • Date of receipt to be displayed on the invoice
  • Contractor number to be displayed on document
  • Must be issued by relevant state government authority
  • Black and white or coloured copy of evidence can be accepted
When Licence is uploaded:
    • Expiry Date = The date of expiration on the evidence

When Invoice (For new contractor Licence) has been uploaded:

  • The date of expiration on the evidence should be recorded as the date which is calculated to be 4x weeks from the date of renewal completion
 

Electrical.Licence.QLD

Anchor
ElectricalQLD
ElectricalQLD

When Licence is uploaded:

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • ‘Electrician’ or similar to be listed
  • Screenshots from websites are not accepted - Must be copy of the Licence
  • Must be issued by a relevant Australian state government authority  with corresponding logo shown on licence EG QLD Government
  • Black and white or coloured copy of evidence can be accepted
  • Supervisor licence can be accepted for the Electrical Contractor licence

When Invoice (For new contractor Licence) has been uploaded:

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • ‘Electrician’ or similar to be listed
  • Date of receipt to be displayed on the invoice
  • Contractor number to be displayed on document
  • Must be issued by relevant state government authority
  • Black and white or coloured copy of evidence can be accepted
When Licence is uploaded:
    • Expiry Date = The date of expiration on the evidence

When Invoice (For new contractor Licence) has been uploaded:

  • The date of expiration on the evidence should be recorded as the date which is calculated to be 4x weeks from the date of renewal completion
 

Electrical.Licence.SA

Anchor
ElectricalSA
ElectricalSA

When Licence is uploaded:

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • ‘Electrician’ or similar to be listed
  • Screenshots from websites are not accepted - Must be copy of the Licence
  • Must be issued by a relevant Australian state government authority  with corresponding logo shown on licence EG SA Government
  • Black and white or coloured copy of evidence can be accepted

When Invoice (For new contractor Licence) has been uploaded:

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • ‘Electrician’ or similar to be listed
  • Date of receipt to be displayed on the invoice
  • Contractor number to be displayed on document
  • Must be issued by relevant state government authority
  • Black and white or coloured copy of evidence can be accepted
When Licence is uploaded:
    • Expiry Date = The date of expiration on the evidence

When Invoice (For new contractor Licence) has been uploaded:

  • The date of expiration on the evidence should be recorded as the date which is calculated to be 4x weeks from the date of renewal completion
Image Modified

Electrical.Licence.TAS

 


Anchor
ElectricalTAS
ElectricalTAS

When Licence is uploaded:

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • ‘Electrician’ or similar to be listed
  • Screenshots from websites are not accepted - Must be copy of the Licence
  • Must be issued by a relevant Australian state government authority  with corresponding logo shown on licence EG Tasmanian Government
  • Black and white or coloured copy of evidence can be accepted
  • Supervisor licence can be accepted for the Electrical Contractor licence

When Invoice (For new contractor Licence) has been uploaded:

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • ‘Electrician’ or similar to be listed
  • Date of receipt to be displayed on the invoice
  • Contractor number to be displayed on document
  • Must be issued by relevant state government authority
  • Black and white or coloured copy of evidence can be accepted
When Licence is uploaded:
    • Expiry Date = The date of expiration on the evidence

When Invoice (For new contractor Licence) has been uploaded:

  • The date of expiration on the evidence should be recorded as the date which is calculated to be 4x weeks from the date of renewal completion
 

Anchor
ElectricalVIC
ElectricalVIC
Electrical.Licence.VIC

When Licence is uploaded:

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • ‘Electrician’ or similar to be listed
  • Screenshots from websites are not accepted - Must be copy of the Licence
  • Must be issued by a relevant Australian state government authority  with corresponding logo shown on licence EG Energysafe Vic
  • Black and white or coloured copy of evidence can be accepted
  • Supervisor licence can be accepted for the Electrical Contractor licence

When Invoice (For new contractor Licence) has been uploaded:

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • ‘Electrician’ or similar to be listed
  • Date of receipt to be displayed on the invoice
  • Contractor number to be displayed on document
  • Must be issued by relevant state government authority
  • Black and white or coloured copy of evidence can be accepted
When Licence is uploaded:
    • Expiry Date = The date of expiration on the evidence

When Invoice (For new contractor Licence) has been uploaded:

  • The date of expiration on the evidence should be recorded as the date which is calculated to be 4x weeks from the date of renewal completion
 

Electrical.Licence.WA

Anchor
ElectricalWA
ElectricalWA

When Licence is uploaded:

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • ‘Electrician’ or similar to be listed
  • Screenshots from websites are not accepted - Must be copy of the Licence
  • Must be issued by a relevant Australian state government authority  with corresponding logo shown on licence EG Energysafe WA
  • Black and white or coloured copy of evidence can be accepted
  • Supervisor licence can be accepted for the Electrical Contractor licence

When Invoice (For new contractor Licence) has been uploaded:

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • ‘Electrician’ or similar to be listed
  • Date of receipt to be displayed on the invoice
  • Contractor number to be displayed on document
  • Must be issued by relevant state government authority
  • Black and white or coloured copy of evidence can be accepted
When Licence is uploaded:
    • Expiry Date = The date of expiration on the evidence

When Invoice (For new contractor Licence) has been uploaded:

  • The date of expiration on the evidence should be recorded as the date which is calculated to be 4x weeks from the date of renewal completion
 



Expand
titleStatement of Attainment


CompetencyCompetency RequirementsUpload RequirementsExamples
Anchor
UETTDRRF06B
UETTDRRF06B
Electrical.Statement of Attainment.UETTDRRF06B- Perform rescue from a live LV panel
  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • Must display the unit of competency: UETTDRRF06B - Perform Rescue from a live LV panel
  • Statement of Attainment or Card showing statement of attainment unit of competency coding is accepted
  • Must be issued by a Registered Training Organisation (RTO)
  • Black and white or coloured copy of evidence can be accepted
  • The date of completion on the evidence should be recorded as the Issue Date in Onsite
  • Expiry Date = 12 Months from the issue date
Image Modified
Anchor
0417INDHV
0417INDHV
Electrical.Statement of Attainment.0417INDHV - Industry High Voltage Operator
  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • Must display the unit of competency: 0417INDHV - Industry High Voltage Operator
  • Statement of Attainment or Card showing statement of attainment unit of competency coding is accepted
  • Must be issued by a Registered Training Organisation (RTO)
  • Black and white or coloured copy of evidence can be accepted
  • The date of completion on the evidence should be recorded as the Issue Date in Onsite
Image Modified



Electrical.Advanced Diploma.Engineering Technology - Electrical

 

Electrical.Certificate III.Electrical Fitting

Electrical.Certificate III.Electrical Machine Repair

 

Electrical.Certificate III.Electrotechnology Electrician

ECElectrotech
Expand
titleTrade Qualifications

Anchor
electricaltradequals
electricaltradequals

CompetencyCompetency RequirementsUpload RequirementsExamples

Anchor
EADEngineering
EADEngineering

Electrical.Advanced Diploma.Electrical - Engineering

 


  • Electrical.Advanced Diploma.Electrical - EngineeringApplicants name to be displayed on uploaded evidence and to match applicants registered name
  • Recognised Training Institution name to be displayed on document
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
  • Name and / or signature of issuer to be shown
  • Document / Certificate / Number to be shown
  • Completion date or issue date must be displayed
  • No expiry

For overseas / international engineering qualifications to be accepted they need to either be recognised under the:


If an international / overseas issued degree is uploaded as the evidence for this competency: Avetta staff CLICK HERE for additional information prior to file verification

  • The date of completion on the evidence should be recorded as the Issue Date in Onsite
 

Electrical.Advanced Diploma.Electrical Systems Engineering

Anchor
EADSystems
EADSystems

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • Recognised Training Institution name to be displayed on document
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
  • Name and / or signature of issuer to be shown
  • Document / Certificate / Number to be shown
  • Completion date or issue date must be displayed
  • No expiry

For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

  • The date of completion on the evidence should be recorded as the Issue Date in Onsite
 
Anchor
EADTechnologyEADTechnology
  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • Recognised Training Institution name to be displayed on document
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
  • Name and / or signature of issuer to be shown
  • Document / Certificate / Number to be shown
  • Completion date or issue date must be displayed
  • No expiry

For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

  • The date of completion on the evidence should be recorded as the Issue Date in Onsite
 
Anchor
ECFittingECFitting
  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • Recognised Training Institution name to be displayed on document
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
  • Name and / or signature of issuer to be shown
  • Document / Certificate / Number to be shown
  • Completion date or issue date must be displayed
  • No expiry
  • The date of completion on the evidence should be recorded as the Issue Date in Onsite
Image Removed
Anchor
MachineRepairMachineRepair
  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • Recognised Training Institution name to be displayed on document
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
  • Name and / or signature of issuer to be shown
  • Document / Certificate / Number to be shown
  • Completion date or issue date must be displayed
  • No expiry
  • The date of completion on the evidence should be recorded as the Issue Date in Onsite
 
Anchor
ECElectrotech


If an international / overseas issued degree is uploaded as the evidence for this competency: Avetta staff CLICK HERE for additional information prior to file verification

  • The date of completion on the evidence should be recorded as the Issue Date in Onsite

Electrical.Advanced Diploma.Engineering Technology - Electrical

Anchor
EADTechnology
EADTechnology


  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • Recognised Training Institution name to be displayed on document
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
  • Name and / or signature of issuer to be shown
  • Document /
Certificate / Number to be shown
  • Completion date or issue date must be displayed
  • No expiry
    • Certificate / Number to be shown
    • Completion date or issue date must be displayed
    • No expiry


    If an international / overseas issued degree is uploaded as the evidence for this competency: Avetta staff CLICK HERE for additional information prior to file verification

    • The date of completion on the evidence should be recorded as the Issue Date in Onsite
    Image Removed

    Electrical.Certificate III.

    Engineering -

    Electrical

    /Electronic Trade

    Fitting

    Anchor

    ECElectronicTrade 

    ECFitting

    ECElectronicTrade

    ECFitting


    • Applicants name to be displayed on uploaded evidence and to match applicants registered name
    • Recognised Training Institution name to be displayed on document
    • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
    • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
    • Name and / or signature of issuer to be shown
    • Document / Certificate / Number to be shown
    • Completion date or issue date
    must be displayed
  • No expiry

    • For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

  • Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
    • Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification
    • must be displayed
    • No expiry
    • The date of completion on the evidence should be recorded as the Issue Date in Onsite
    Image Added

    Electrical.Certificate III.Electrical Machine Repair

    Anchor
    MachineRepair
    MachineRepair


    • Applicants name to be displayed on uploaded evidence and to match applicants registered name
    • Recognised Training Institution name to be displayed on document
    • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
    • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
    • Name and / or signature of issuer to be shown
    • Document / Certificate / Number to be shown
    • Completion date or issue date must be displayed
    • No expiry
    • The date of completion on the evidence should be recorded as the Issue Date in Onsite
     

    Electrical.Certificate III.

    Engineering - Industrial

    Electrotechnology Electrician

    Anchor

    ECIndustrial

    ECElectrotech

    ECIndustrial

    ECElectrotech

    • Applicants name to be displayed on uploaded evidence and to match applicants registered name
    • Recognised Training Institution name to be displayed on document
    • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
    • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
    • Name and / or signature of issuer to be shown
    • Document / Certificate / Number to be shown
    • Completion date or
    issue date must be displayed
  • No expiry

    • For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

  • Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
    • Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification
    • issue date must be displayed
    • No expiry
    • The date of completion on the evidence should be recorded as the Issue Date in Onsite
    Image Added

    Electrical.Certificate III.Engineering - Electrical/Electronic Trade

    Anchor
    ECElectronicTrade
    ECElectronicTrade


    • Applicants name to be displayed on uploaded evidence and to match applicants registered name
    • Recognised Training Institution name to be displayed on document
    • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
    • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
    • Name and / or signature of issuer to be shown
    • Document / Certificate / Number to be shown
    • Completion date or issue date must be displayed
    • No expiry


    • The date of completion on the evidence should be recorded as the Issue Date in Onsite
     

    Electrical.Certificate III.

    Electrical and Instrumentation

    Engineering - Industrial Electrician

    Anchor
    ECElectricalInstrumentation
    ECIndustrial
    ECElectricalInstrumentation
    ECIndustrial
    • Applicants name to be displayed on uploaded evidence and to match applicants registered name
    • Recognised Training Institution name to be displayed on document
    • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
    • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
    • Name and / or signature of issuer to be shown
    • Document / Certificate / Number to be shown
    • Completion date or issue date must be displayed
    • No expiry
    • The date of completion on the evidence should be recorded as the Issue Date in Onsite
     

    Electrical.Certificate III.Electrical and Instrumentation

    Anchor

    ECInstrumentation

    ECElectricalInstrumentation

    ECInstrumentation

    ECElectricalInstrumentation

    • Applicants name to be displayed on uploaded evidence and to match applicants registered name
    • Recognised Training Institution name to be displayed on document
    • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
    • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
    • Name and / or signature of issuer to be shown
    • Document / Certificate / Number to be shown
    • Completion date or issue date must be displayed
    • No expiry
    • The date of completion on the evidence should be recorded as the Issue Date in Onsite
     

    Electrical.Certificate

    IV

    III.

    Electrical and

    Instrumentation

    Anchor
    ECIVInstrumentation 
    ECInstrumentation
    ECIVInstrumentation
    ECInstrumentation
    • Applicants name to be displayed on uploaded evidence and to match applicants registered name
    • Recognised Training Institution name to be displayed on document
    • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
    • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
    • Name and / or signature of issuer to be shown
    • Document / Certificate / Number to be shown
    • Completion date or issue date must be displayed
    • No expiry
    • The date of completion on the evidence should be recorded as the Issue Date in Onsite
    Image Removed

    Electrical.Certificate IV.

    Electrotechnology -

    Electrical

    Contracting

    and Instrumentation

    Anchor

    ECIVContracting

    ECIVInstrumentation

    ECIVContracting

    ECIVInstrumentation


    • Applicants name to be displayed on uploaded evidence and to match applicants registered name
    • Recognised Training Institution name to be displayed on document
    • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
    • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
    • Name and / or signature of issuer to be shown
    • Document / Certificate / Number to be shown
    • Completion date or issue date must be displayed
    • No expiry
    • The date of completion on the evidence should be recorded as the Issue Date in Onsite
     
    Image Added

    Electrical.Certificate IV.Electrotechnology -

    Systems Electrician

    Electrical Contracting

    Anchor

    ECIVSystems

    ECIVContracting

    ECIVSystems

    ECIVContracting

    • Applicants name to be displayed on uploaded evidence and to match applicants registered name
    • Recognised Training Institution name to be displayed on document
    • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
    • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
    • Name and / or signature of issuer to be shown
    • Document / Certificate / Number to be shown
    • Completion date or issue date must be displayed
    • No expiry
    • The date of completion on the evidence should be recorded as the Issue Date in Onsite
    Image Removed

    Electrical.

    Diploma.Electrical Engineering

    Certificate IV.Electrotechnology - Systems Electrician

    Anchor

    EDEngineering

    ECIVSystems

    EDEngineering

    ECIVSystems

    • Applicants name to be displayed on uploaded evidence and to match applicants registered name
    • Recognised Training Institution name to be displayed on document
    • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
    • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
    • Name and / or signature of issuer to be shown
    • Document / Certificate / Number to be shown
    • Completion date or issue date must be displayed
    • No expiry

    For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

  • Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
    • Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification
    • The date of completion on the evidence should be recorded as the Issue Date in Onsite
    Image Added

    Electrical.Diploma.Electrical Engineering

    Anchor
    EDEngineering
    EDEngineering

    • Applicants name to be displayed on uploaded evidence and to match applicants registered name
    • Recognised Training Institution name to be displayed on document
    • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
    • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
    • Name and / or signature of issuer to be shown
    • Document / Certificate / Number to be shown
    • Completion date or issue date must be displayed
    • No expiry

    If an international / overseas issued degree is uploaded as the evidence for this competency: Avetta staff CLICK HERE for additional information prior to file verification

    • The date of completion on the evidence should be recorded as the Issue Date in Onsite
    Image Modified

    Electrical.Diploma.Electrical Systems Engineering

    Anchor
    EDSystems
    EDSystems

    • Applicants name to be displayed on uploaded evidence and to match applicants registered name
    • Recognised Training Institution name to be displayed on document
    • Actual copy of certificate / degree is required. Letters are not accepted in lieu
    of this.
  • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
  • Name and / or signature of issuer to be shown
  • Document / Certificate / Number to be shown
  • Completion date or issue date must be displayed
  • No expiry

    • For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

  • Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
    • Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification
    • of this.
    • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
    • Name and / or signature of issuer to be shown
    • Document / Certificate / Number to be shown
    • Completion date or issue date must be displayed
    • No expiry

    If an international / overseas issued degree is uploaded as the evidence for this competency: Avetta staff CLICK HERE for additional information prior to file verification

    • The date of completion on the evidence should be recorded as the Issue Date in Onsite
     

    Electrical.Diploma.Electrical and Instrumentation

    Anchor
    EDInstrumentation
    EDInstrumentation

    • Applicants name to be displayed on uploaded evidence and to match applicants registered name
    • Recognised Training Institution name to be displayed on document
    • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
    • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
    • Name and / or signature of issuer to be shown
    • Document / Certificate / Number to be shown
    • Completion date or issue date must be displayed
    • No expiry

    If an international / overseas issued degree is uploaded as the evidence for this competency: Avetta staff CLICK HERE for additional information prior to file verification

    • The date of completion on the evidence should be recorded as the Issue Date in Onsite
     

    Electrical.Diploma.Electrical and Refrigeration and Air-conditioning

    Anchor
    EDRefridgerationandAC
    EDRefridgerationandAC

    • Applicants name to be displayed on uploaded evidence and to match applicants registered name
    • Recognised Training Institution name to be displayed on document
    • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
    • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
    • Name and / or signature of issuer to be shown
    • Document / Certificate / Number to be shown
    • Completion date or issue date must be displayed
    • No
    expiry
    • expiry

    If an international / overseas issued degree is uploaded as the evidence for this competency: Avetta staff CLICK HERE for additional information prior to file verification

    • The date of completion on the evidence should be recorded as the Issue Date in Onsite
     

    Engineering.Bachelor Degree.Electrical Engineering

    Anchor
    EBDElectrical
    EBDElectrical

    • Applicants name to be displayed on uploaded evidence and to match applicants registered name
    • Recognised Training Institution name to be displayed on document
    • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
    • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
    • Name and / or signature of issuer to be shown
    • Document / Certificate / Number to be shown
    • Completion date or issue date must be displayed
  • No expiry

    • For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

  • Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
    • Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification
    • No expiry

    If an international / overseas issued degree is uploaded as the evidence for this competency: Pegasus staff CLICK HERE for additional information prior to file verification

    • The date of completion on the evidence should be recorded as the Issue Date in Onsite
     

    Electrical Fitting.Certificate.Instruments Australian Recognised 

    Anchor
    ElectricalFittingInstruments
    ElectricalFittingInstruments

    • Applicants name to be displayed on uploaded evidence and to match applicants registered name
    • Must be issued by Commonwealth of Australia
    • Actual copy of Australian Recognised Trade Certificate is required. Letters are not accepted in lieu of this.
    • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
    • Name and / or signature of issuer to be shown
    • Document / Certificate / Number to be shown
    • Completion date or issue date must be displayed
    • No expiry
    • The date of completion on the evidence should be recorded as the Issue Date in Onsite


    If you have been asked to provide a Statement of Competency please click here for the template and business rules