Competency | Competency Requirements | Upload Requirements | Examples |
---|
Telecommunications Operator.Induction.OneNZ Health and Safety | The required evidence will be one of the following: - Certificate or competency card showing "Vodafone Health and Safety" OR "One NZ Health and Safety Induction" as minimum
- Evidence must be valid and in date
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date= As shown on evidence Expiry Date= 2 years from issue date | |
Telecommunications Operator.Module.OneNZ EMF/RF Awareness | The required evidence will be a: - Certificate or competency card showing EMF/RF Awareness course completion
- Issue date must be clear and current
- Must show assessment pass result
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where the evidence completion date exceeds 3 years or has expired, an additional certificate showing EMF/RF Awareness course completion MUST be provided | Issue Date= As shown on evidence Expiry Date= 3 years from issue date | |
Telecommunications Operator.Accreditation.OneNZ Individual Accreditation | The required evidence will be a: - Vodafone OR One NZ “Individual Accreditation Application”
- Expiry is 2 years from receiving evidence
- All sections must be filled out
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date= As shown on evidence Expiry Date= 2 years from issue date | |
Underground Services.Licence.Exxon Mobil Safety Passport | The evidence will be a: - Certificate or competency card showing Safety Passport
- Evidence will be issued by Exxon Mobile Only
- Issue and expiry date must be clear and visible
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
Where the evidence completion date exceeds 2 years, an additional certificate showing Safety Passport MUST be provided | Issue Date= Course completion date Expiry Date= 2 years from course completion date | |
Electrical.Certificate.Transpower Substation Entry SE1 | The evidence will be a one of the following: - Certificate showing Substation Entry (SE1) Level 1 course completion
- Certificate showing TPSS 06.21 RAE Restricted Areas Entry course completion
- Evidence will be issued by Gridskills ONLY
- Course Completion date must be visible
- Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
Where the evidence completion date exceeds 2 years, an additional certificate showing either Substation Entry (SE1) Level 1 or TPSS 06.2 RAE Restricted Areas Entry course completion MUST be provided | Issue Date= Course completion date Expiry Date= 2 years from course completion date | |
Electrical.Certificate.Transpower Substation Entry SE2 | The evidence will be a one of the following: - Certificate showing Substation Entry (SE2) Level 2 course completion
- Evidence will be issued by Gridskills ONLY
- Course Completion date must be visible
- Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
Where the evidence completion date exceeds 2 years, an additional certificate showing either Substation Entry (SE1) Level 2 or TPSS 06.2 RAE Restricted Areas Entry course completion MUST be provided | Issue date = as per document Expiry date = 2 years after issue date |
|
Power.Document.Transpower-SE2 On Job Assessment or Refresher Webinar | The evidence will be a: - Certificate showing Substation Entry (SE2) Level 2 or refresher Certificate
- Evidence will be issued by Gridskills ONLY
- Course Completion date must be visible
- Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
Where the evidence completion date exceeds 2 years, an additional certificate showing Substation Entry (SE2) Level 2 or refresher course completion MUST be provided | Issue Date= Course completion date Expiry Date=2 years from course completion date | |
Power.Document.Transpower-SE2 On Job Assessment (Tauranga substation) | The evidence will be a: - Certificate showing Substation Entry (SE2) Level 2 Certificate
- Evidence will be issued by Gridskills ONLY
- Course Completion date must be visible
- Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
| Issue Date= Course completion date Expiry Date=Non-expiring | |
Electrical.Certificate.Transpower Work Management WM | The evidence will be a: - Certificate showing Work Management course completion
- Evidence will be issued by Gridskills ONLY
- Course Completion date must be visible
- Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
| Issue Date= Course completion date Expiry Date= 2 years from course completion date
| |
Rail.Course.KiwiRail Electrification Awareness Basic (EAB) | The required evidence will be either of the following: - Copy of email confirming course completion of KiwiRail – Electrification Awareness Basic (EAB) issued by KiwiRail
- Screenshot or website print-out confirming course completion / pass result of KiwiRail – Electrification Awareness Basic (EAB)
- Evidence must show KiwiRail website URL or email from @kiwirail.co.nz
- Evidence must show course completion date
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
If completion date exceeds 2 years, an additional refresher or course completion of either - Copy of email confirming course completion of KiwiRail - Electrification Awareness Basic (EAB) issued by KiwiRail
- Screenshot or website print-out confirming course completion / pass result of KiwiRail Electrification Awareness Basic (EAB) issued by KiwiRail MUST be provided
| Issue Date= Course completion date Expiry Date= 2 years from course completion date | |
Rail.Course.KiwiRail Electrification Awareness Intermediate (EAI) | The required evidence will be either of the following: - Copy of email confirming course completion of KiwiRail - Electrification Awareness Intermediate (EAI)
- Screenshot or system print-out confirming course completion / pass result of KiwiRail - Electrification Awareness Intermediate (EAI)
- Evidence must show KiwiRail website URL or email from @kiwirail.co.nz
- Evidence must be valid and in date
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
If completion date exceeds 2 years, an additional refresher or course completion of either - Copy of email confirming course completion of KiwiRail - Electrification Awareness Intermediate (EAI)
- Screenshot or website print-out confirming course completion / pass result KiwiRail Electrification Awareness Intermediate (EAI) issued by KiwiRail MUST be provided
| Issue Date= Course completion date Expiry Date= 2 years from course completion date | |
Rail.Course.Kiwirail Tunnel Operations practical training | The required evidence will be one of the following: - Training record issued by Kiwirail
- Must mention ‘Tunnel Operations’ in the course detail section
- Must have ‘Passed’ or ‘Achieved’ in ‘Course result’ section
- Competency report issued by Kiwirail
- Must mention ‘Tunnel Operations infrastructure’ or ‘Tunnel Operations recertification’
- Expiry date must be valid
- Screenshot of Kiwirail Learner portal
- Must mention ‘Tunnel Operations infrastructure’ or ‘Tunnel Operations recertification’
- Must show status ‘Competent’
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Workforce Management (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Completion date OR expiry date must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue date: As per evidence or if not stated in evidence, 2 years prior to expiry date. Expiry date: As per evidence, or if not stated in evidence 2 years from issue date. |
|
Rail.Course.Kiwirail Tunnel Operations theory module | The required evidence will be one of the following: - Screenshot of Kiwirail Learner portal
- Must mention ‘Tunnel Operations (theory)’
- Must show status ‘Competent’
- Competency report issued by Kiwirail
- Must mention ‘Tunnel Operations (theory)’
- Expiry date must be valid
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Workforce Management (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Completion date OR expiry date must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue date: As per evidence or if not stated in evidence, 2 years prior to expiry date. Expiry date: As per evidence, or if not stated in evidence 2 years from issue date. Note: the theory module is to completed the year the Kiwirail Tunnel Operations practical training is not due. The expiry date of the Kiwirail Tunnel Operations theory module should fall the year after the expiry date of the most recent Kiwirail Tunnel Operations practical training completed by the same worker. |
|
Rail.Induction.KiwiRail | The required evidence will be either of the following: - Copy of email confirming course completion of KiwiRail Induction
- Screenshot or website print-out confirming course completion / pass result of KiwiRail Induction
- Evidence must show KiwiRail website URL or email from @kiwirail.co.nz
- Evidence must be valid and in date
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date= Course completion date Expiry Date= Not required | |
Rail.Induction.KiwiRail Individual Train Detection | The required evidence will be either of the following: - Copy of email confirming course completion of KiwiRail Individual Train Detection
- Screenshot or website print-out confirming course completion / pass result of KiwiRail Individual Train Detection
- Evidence must show KiwiRail website URL or email from @kiwirail.co.nz
- Evidence must be valid and in date
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
If completion date exceeds 2 years, an additional refresher or course completion of either - Copy of email confirming course completion of KiwiRail Individual Train Detection issued by KiwiRail
- Screenshot or website print-out confirming course completion / pass result of KiwiRail Individual Train Detectionissued by KiwiRail MUSTbe provided
| Issue Date= Course completion date Expiry Date= 2 years from course completion date |
|
Underground Services.Licence.BeforeUdig
| The evidence will be a: - Certificate showing beforeUdig Certified Locator
- Evidence will be issued by beforeUdig Certified Locator ONLY
- Course Completion date must be visible
- Where assessor /signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
Where the evidence completion date exceeds 3 years, an additional certificate showing beforeUdig Certified Locator MUST be provided | Issue Date= Course completion date Expiry Date= 2 years from course completion date | |
Underground Services.Induction.CentrePort Wellington | The evidence will be one of the following - CentrePort Access Card
- Certificate showing CentrePort Wellington Induction
- Evidence will be issued by CentrePort ONLY
- Expiry date must be visib
- Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
Where the evidence has expired, an additional certificate or card issued from CentrePort MUST be provided | Issue Date= Not required Expiry Date= As per evidence | |
Electrical.Course.Ventia Excavation Drill Permit & Inside Premise Permit | The evidence will be a: - Ventia Certificate of Achievement showing completing EDP/IPP Permit
- Evidence will be issued by Ventia ONLY
- Course Completion date must be visible
- VisRes ID number must be visible
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
Where the evidence completion date exceeds 2 years, an additional Ventia Certificate of Achievement showing completing EDP/IPP Permit MUST be provided | Issue Date= Course completion date Expiry Date= 2 years from course completion date |
|
Electrical.Course.Ventia Risk Management | The evidence will be a: - Ventia Certificate of Achievement showing completing Risk Management
- Evidence will be issued by Ventia ONLY
- Course Completion date must be visible
- VisRes ID number must be visible
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
Where the evidence completion date exceeds 2 years, an additional Ventia Certificate of Achievement showing Risk Management MUST be provided | Issue Date= Course completion date Expiry Date= 2 years from course completion date | |
Water.Competency.Watercare Customer Experience | The evidence will be: - Watercare certificate showing recognition of "Customer Experience Training" Course Certificate Number MUST be visible
- Evidence will be issued by Watercare ONLY
- Expiry date MUST be visible
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
| Issue Date= As per certificate Expiry Date=Not required |
|
Water.Induction.Watercare | The evidence will be one of the following: - Watercare certificate showing recognition of "Networks - Contractor Induction" Course Certificate Number MUST be visible
- Watercare competency card showing recognition of "Safety Induction" ID number MUST be visible
- Watercare attendance sheet displaying any "Induction" applicate signature MUST be visible
- Evidence will be issued by Watercare ONLY
- Expiry date MUST be visible
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
Where the evidence completion date exceeds 1 years, an additional competency card of one of the following - Watercare certificate showing recognition of "Networks - Contractor Induction" Course Certificate Number MUST be visible
- Watercare competency card showing recognition of "Safety Induction" ID number MUST be visible
- Watercare attendance sheet displaying any "Induction" applicate signature MUST be visible MUST be provided
| Issue Date= 1 years prior to expiry date Expiry Date= As per evidence | |
Electrical.Induction.Ventia Chorus Protect the Network | The evidence will be one of the following: - Certificate of Achievement showing recognition of Chorus - Protect The Network
- VisRes ID number and VNZ trainer name must be displayed
- Course Completion date must be visible
- Screen shot from VisRes SSP portal showing compliant for Chorus - PTN
- Must be from visres.vspl.net website
- Expiry date must be visible and current
- Evidence will be issued by Ventia ONLY
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
Where the evidence completion date exceeds 2 years, an additional Certificate of Achievement showing recognition of Chorus - Protect The Network MUST be provided | Issue Date= Course completion date Expiry Date= 2 years from course completion date | |
Telecommunications Operator.Induction.Spark or Chorus Protect the Network | The evidence will be one of the following: - Ventia Certificate of Achievement showing recognition of Chorus - Protect The Network
- Course Completion date must be visible
- VisRes ID number and VNZ trainer name must be displayed
- Copy of PTN Training record in form of a table (see sample provided for this business rule. Excel file is acceptable). MUST DISPLAY
- Date of training
- Surname and First Name of attendee
- Organisation of attendee
- Have a tick in the PTN column
- Name of the trainer
- Expiry date is 2 years from date of training stated on PTN training record provided
- Screen shot from VisRes SSP portal showing compliant for Chorus - PTN
- Must be from vspl.netwebsite
- Expiry date must be visible and current
- Screenshot from Spark website showing under "My Achievements" course completion of PTN Accreditation Training
- Copy of a completed PTN – Site Access Accreditation test
- Must have Chorus and Spark logo in the header of the document
- Must display the date issued (date in header), the name of the candidate and company
- Grade provided must be over 10/20
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
Where the evidence completion date exceeds 2 years, an additional Certificate of Achievement showing recognition of Chorus - Protect The Network MUST be provided | Issue Date= Course completion date/2 years prior to expiry date Expiry Date= 2 years from course completion date/ evidence expiry date | |
Contractor.Authority.Chorus Access Card | The required evidence will be one of the following: - Must show "Chorus Access Card"
- Must display image of worker
- Expiry date must be visible
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where the evidence has expired, an additional card must be provided | Issue Date= Not required Expiry Date= As Shown on evidence | |
Telecommunications Operator.Induction.Horizon Network Safety | The evidence will be one of the following: - Horizon Network Safety Certificate
- Assessment Completion date or expiry date must be visible
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
| Issue Date= As shown on evidence Expiry Date= As Shown on evidence |
|
Telecommunications Operator.Induction.Kordia Site Access | The required evidence will be a: - Issue date must be clear
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where the evidence completion date exceeds 3 years, an additional Screenshot or email from Access@kordia.co.nz confirming Site Accredited MUST be provided | Issue Date= Course completion date Expiry Date= 3 years from course completion date |
|
Telecommunications Operator.Induction.Vocus Network Safety | The evidence will be: - Vocus Statement of Completion MUST be visible showing one of the following
- Vocus NZ Bunker site
- Vocus NZ Core Site
- VDC-AKL
- Vocus NZ Offices
- Evidence will be issued by Vocus ONLY
- Issued on AND Valid to MUST be visible
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
Where the evidence completion date exceeds 1 years, an additional Vocus Statement of Completion showing one of the following: - Vocus NZ Bunker site
- Vocus NZ Core Site
- VDC-AKL
- NZ Offices MUST be provided
| Issue Date= The course completion date Expiry Date = 1 years from issue date | |
Telecommunications Operator.Course.Chorus Remote Access Tracks (WTC 6) | The required evidence will be one of the following: - Certificate or competency card issued from a NZQA accredited training organisation showing completion of US 17976, 17978
- Certificate or competency card issued from a NZQA accredited training organisation showing completion of Four Wheel Drive or Refresher Course Completion
- NZQA Record of Achievement showing completion the following unit standards 17976, 17978
- Chorus WTC 6 Remote Access Tracks or Refresher Certificate
- Date of training completion or date of unit standards achieved must be visible
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 2 years, an additional certificate or competency card showing either - Certificate or competency card issued from a NZQA accredited training organisation showing completion of US 17976, 17978
- Certificate or competency card issued from a NZQA accredited training organisation showing completion of Four Wheel Drive or Refresher Course Completion
- Chorus WTC 6 Remote Access Tracks or Refresher Certificate MUST be provided
| Issue Date= The course completion date Expiry Date = 2 years from issue date | |
Electrical.Induction.Powernet Network Access | The evidence will be one of the following: - Powernet Record of Safety Training document stating “Network Access Certificate training and authorisation”
- Powernet “Network Access Certificate Request” form – Powernet section 2.0 must be completed and approved (Yes) box ticked
- Certificate or competency card issued from Powernet stating “Network Access Certificate”
- Assessment Completion date or expiry date must be visible
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following - Powernet Record of Safety Training document stating “Network Access Certificate training and authorisation”
- Powernet “Network Access Certificate Request” form – Powernet section 2.0 must be completed and approved (Yes) box ticked
- Certificate or competency card issued from Powernet stating “Network Access Certificate” MUSTbe provided
| Issue Date= The course completion date Expiry Date = 2 years from issue date | |
Electrical.Induction.Unison Networks Safety | The evidence will be one: - Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Unison OS1010 (Fibre)
- Assessment Completion date must be visible
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 14 months, an additional certificate showing Attendance for “Unison OS1010 (Fibre)” MUST be provided | Issue Date= The course date Expiry Date = 14 months from issue date | |
Electrical.Induction.Counties Power Network Safety | The evidence will be one of the following: - Counties Energy Limited Network Safety Induction from Counties Energy Network Access Authority(Applicant Limitations of Access)
- Letter from Counties Energy Network
- Assessment Completion date or expiry date must be visible
- Work Type Competency authorization noted on letter
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following - "Training and Assessment Report" from SafeT Factors stating Counties Power Network Safety Induction
- Certificate or competency card issued from Counties Power stating “Counties Power Authorised” MUSTbe provided
| Issue Date= The course completion date Expiry Date = 2 years from issue date | |
Electrical.Induction.WEL Network Health & Safety Induction | The evidence will be one of the following: - Document CG-101 Health and Safety Standards for personnel working on WEL Network (snip of page 1 of document is acceptable as is a large document)
- Assessment Completion date must be visible
- Inductee name, Inductee organisation, WEL Facilitator and signature must be visible
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Workforce (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
Where the evidence completion date exceeds 2 years, an additional CG-101 Document MUST be provided | Issue Date= The course completion date Expiry Date = 2 years from issue date |
|
Electrical.Induction.WEL Network Outage & Access Management, Permits & Switching (NOAMPS) | The evidence will be one of the following: - Document OR-101 Network Outage & Access management, permits & switching (NOAMPS) on WEL Network (snip of page 1 of document is acceptable as is a large document)
- AOAMPS advanced badge (Snip of document is accepted)
- Assessment Completion date must be visible
- Inductee name, Inductee organisation, WEL Facilitator must be visible
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Workforce (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
Where the evidence completion date exceeds 2 years, an additional OR-101 Document MUST be provided | Issue Date= The course completion date Expiry Date = 2 years from issue date |
|
Electrical.Course.Aurora Electrical Course Instruction | The required evidence will be either of the following: - Certificate of Attendance – “Restricted Area Work, For work on the Aurora Energy Network” and “Aurora Energy Competency Standard”
- Certificate or competency card issued from a NZQA accredited training organisation showing completion of Aurora Network Safety Induction
- Evidence must be valid and in date
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
If completion date exceeds 2 years, an additional refresher or course completion of either - Certificate of Attendance – “restricted Area Work, For work on the Aurora Energy Network” and “Aurora Energy Competency Standard”
- Certificate or competency card issued from a NZQA accredited training organisation showing completion of Aurora Network Safety Induction MUST be provided
| Issue Date= Course completion date Expiry Date= 2 years from course completion date | |
Electrical.Induction.Wellington Electricity Safe Work Practices | The evidence will be: - Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Wellington Electricity Network Safety Induction
- Course Completion date must be visible
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Wellington Electricity Network Safety Induction MUST be provided | Issue Date= Course completion date Expiry Date= 2 years from course completion date | |
Electrical.Course.Wellington Electricity Permit Management | The required evidence will be one of the following: - Certificate or competency card issued from a NZQA accredited training organisation showing completion of Wellington Electricity Permit Management
- Training and Assessments report issued from a NZQA accredited training organisation showing completion of Wellington Electricity Permit Recipient WTC 4.8
- Date of training completion must be visible
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 2 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing completion of Wellington Electricity Permit Management MUST be provided | Issue Date= Course completion date Expiry Date= 2 years from course completion date |
|
Electrical.Induction.Waipa Networks | The evidence will be: - Contractor Safety Induction form from Waipa Networks, Health and Safety at Work and Environment Management Systems
- Assessment Completion date must be visible
- Where Waipa Representative signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Applicant must have signed induction form
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
Where the evidence completion date exceeds 2 year, an additional form showing Contractor Safety Induction form from Waipa Networks, Health and Safety at Work and Environment Management Systems MUSTbe provided | Issue Date= Induction date on evidence Expiry Date = 2 years from induction date | |
Electrical.Course.Meridian EAC | The required evidence will be one of the following: - Certificate or competency card issued from a NZQA accredited training organisation showing completion of “EAC Meeting GPG 401 for Meridian Energy Hydro & Wind Generation Sites”
- Email confirmation from @meridianenergy.co.nz of EAC Course completion
- Evidence must be valid and visible date
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Copy must be clear and legible
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
If completion date exceeds 2 years or has expired, an additional refresher or course completion of either - Certificate or competency card issued from a NZQA accredited training organisation showing completion of “EAC Meeting GPG 401 for Meridian Energy Hydro & Wind Generation Sites”
- Email confirmation from @meridianenergy.co.nz of EAC Course completion MUST be provided
| Issue Date = On evidence Expiry date= On evidence or 2 years from issue date | |
Electrical.Course.ScanPower - Close Approach | The required evidence will be either of the following: - Certificate or competency card issued from a NZQA accredited training organisation showing completion of “Close Approach”
- Certificate or competency card issued from a NZQA accredited training organisation showing completion of “Scanpower Competencies” with any between 1 – 6D
- Email confirmation from @scanpower.co.nz of course completion of “close approach”
- Evidence must be valid and in date
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
If completion date exceeds 2 years, an additional refresher or course completion of either - Certificate or competency card issued from a NZQA accredited training organisation showing completion of “Close Approach”
- Certificate or competency card issued from a NZQA accredited training organisation showing completion of “Scanpower Competencies”
- Email confirmation from @scanpower.co.nz of course completion of “close approach” MUST be provided
| Issue Date = On evidence Expiry date= On evidence or 2 years from issue date | |
Electrical.Accreditation.Unison Declaration of Competency to access Network | The evidence will be one of the following: - Unison Declaration of Competency to Access
- Course Completion date must be visible
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
| Issue Date = as per evidence Expiry date= as per evidence |
|
Telecommunications Operator.Competency.Chorus WTC3 - Overhead Network and NC or NZCESL2 | The required evidence will be one of the following: - Certificate or competency card issued from a NZQA accredited training organisation showing Chorus WTC 3 Overhead Network Course Completion
AND - NZQA Record of Achievement showing National or New Zealand Certificate in Electricity Supply Level 2
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Date of training completion or date of unit standard achieved must be visible
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
If completion date on evidence exceeds 2 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing Certificate or competency card issued from a NZQA accredited training organisation showing Chorus WTC 3 Overhead Network Course Completion MUST be provided |
|
|
Power.Induction.Powerco Network Safety - Part A/B | The evidence will be one of the following: - Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Powerco Network Safety Induction
- Attendance record from a NZQA training organisation showing Powerco Network Safety Induction
- Course Completion date must be visible
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 2 year, an additional certificate showing on of the following - Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Powerco Network Safety Induction
- Attendance record from a NZQA training organisation showing Powerco Network Safety Induction MUSTbe provided
| Issue Date = On evidence Expiry date= On evidence or 2 years from issue date | |
Power.Course.Powerco High Voltage Isolation & Access Procedures | The evidence will be one of the following: - Certificate or competency card showing course completion of a Powerco High Voltage Isolation and Access Procedures
- Certificate must display the Powerco logo
- Course Completion date must be visible
- Pass Number MUST be visible
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
Where the evidence completion date exceeds 2 years, an additional certificate showing on of the following - Certificate or competency card showing course completion of a Powerco High Voltage Isolation and Access Procedures
- Attendance record showing Powerco HVIAP – PASS numberMUSTbe provided
| Issue Date = On evidence Expiry date= On evidence or 2 years from issue date | |
Power.Course.Powerco Operational Communication | The evidence will be one of the following: - Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Powerco Operational Communication
- Attendance record from a NZQA training organisation showing Powerco Operational communication
- Course Completion date must be visible
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 2 year, an additional certificate showing on of the following - Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Powerco Operational Communication
- Attendance record from a NZQA training organisation showing Powerco Operational communicationMUST be provided
| Issue Date = On evidence Expiry date= On evidence or 2 years from issue date | |
Power.Document.Powerco WTC 5C Contractor Attestation | The required evidence will be: - Powerco Appendix A – Contract Works Manual Standard Clarification Notification document
- Must show Competency Class 5C Adjacent Communications Work
- The evidence Must have Powerco’s Logo and match example document
- The evidence Must have PDF format
- Where “declaration completed by” must be filled out with Company, position, signature and date
- Applicant’s name MUST be displayed on the Declaration and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Declaration must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date:= Date signed •Expiry Date: Not required | |
Electrical.Induction.Vector Network Safety (WTC1) | The evidence will be one: - Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector Network Safety Induction or Vector WTC 1 Induction course
- Assessment Completion date must be visible
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 2 year, an additional certificate showing Attendance for “Network Safety Induction” or “Vector Induction WTC 1” MUST be provided | Issue Date= The course date Expiry Date = 2 years from issue date | |
Electrical.Induction.Vector Network Safety Induction (WTC 2) | The evidence will be one of the following: - Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector NSI or Vector WTC 2
- Mita Consulting letter showing attendance for Vector NSI Course included USH001 Work Type Competency Standard Version 2, must also state practicing licence number
- Assessment Completion date must be visible
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following - Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector NSI or Vector WTC 2
- Mita Consulting letter showing attendance for Vector NSI Course included USH001 Work Type Competency MUSTbe provided
| Issue Date= The course date Expiry Date = 2 years from issue date | |
Power.Document.Vector Electricity Core Instruction WTC3 | The evidence will be one of the following: - Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 3
- Mita Consulting letter showing attendance for Vector WTC 3 Course with a M – Met Vector Requirements
- Assessment Completion and expiry date must be visible
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following - Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 3
- Mita Consulting letter showing attendance for Vector WTC 3 Course with a M – Met Vector Requirements MUSTbe provided
| Issue Date = On evidence Expiry date= On evidence or 2 years from issue date |
|
Power.Document.Vector Electricity Core Instruction WTC 5 | The evidence will be one of the following: - Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 5
- Mita Consulting letter showing attendance for Vector WTC 5 Course with a M – Met Vector Requirements
- Assessment Completion and expiry date must be visible
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following - Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 5
- Mita Consulting letter showing attendance for Vector WTC 5 Course with a M – Met Vector Requirements MUSTbe provided
| Issue Date = On evidence Expiry date= On evidence or 2 years from issue date |
|
Power.Document.Vector Electricity Core Instruction WTC 6 Attestation | The evidence will be one of the following: - Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 6
- Mita Consulting letter showing attendance for Vector WTC 6 Course with a M – Met Vector Requirements
- Assessment Completion and expiry date must be visible
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following - Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 6
- Mita Consulting letter showing attendance for Vector WTC 6 Course with a M – Met Vector Requirements MUSTbe provided
| Issue Date = On evidence Expiry date= On evidence or 2 years from issue date |
|
Power.Document.Vector Electricity Core Instruction WTC7 | The evidence will be one of the following: - Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 7
- Mita Consulting letter showing attendance for Vector WTC 7 Course with a M – Met Vector Requirements
- Assessment Completion and expiry date must be visible
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following - Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 7
- Mita Consulting letter showing attendance for Vector WTC 7 Course with a M – Met Vector Requirements MUSTbe provided
| Issue Date = On evidence Expiry date= On evidence or 2 years from issue date |
|
Power.Document.Vector Electricity Core Instruction WTC7 | The evidence will be one of the following: - Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 7A
- Mita Consulting letter showing attendance for Vector WTC 7A Course with a M – Met Vector Requirements
- Assessment Completion and expiry date must be visible
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following - Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 7A
- Mita Consulting letter showing attendance for Vector WTC 7A Course with a M – Met Vector Requirements MUSTbe provided
| Issue Date = On evidence Expiry date= On evidence or 2 years from issue date |
|
Power.Document.Vector Electricity Core Instruction WTC 8 | The evidence will be one of the following: - Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8
- Mita Consulting letter showing attendance for Vector WTC 8 Course with a M – Met Vector Requirements
- Assessment Completion and expiry date must be visible
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following - Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8
- Mita Consulting letter showing attendance for Vector WTC 8 Course with a M – Met Vector Requirements MUSTbe provided
| Issue Date = On evidence Expiry date= On evidence or 2 years from issue date |
|
Power.Document.Vector Electricity Core Instruction WTC 8A | The evidence will be one of the following: - Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8A
- Mita Consulting letter showing attendance for Vector WTC 8A Course with a M – Met Vector Requirements
- Assessment Completion and expiry date must be visible
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following - Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8A
- Mita Consulting letter showing attendance for Vector WTC 8A Course with a M – Met Vector Requirements MUSTbe provided
| Issue Date = On evidence Expiry date= On evidence or 2 years from issue date |
|
Power.Document.Vector Electricity Core Instruction WTC 8B | The evidence will be one of the following: - Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8B
- Mita Consulting letter showing attendance for Vector WTC 8B Course with a M – Met Vector Requirements
- Assessment Completion and expiry date must be visible
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following - Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8B
- Mita Consulting letter showing attendance for Vector WTC 8B Course with a M – Met Vector Requirements MUSTbe provided
| Issue Date = On evidence Expiry date= On evidence or 2 years from issue date |
|
Power.Document.Vector Electricity Core Instruction WTC 8C | The evidence will be one of the following: - Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8C
- Mita Consulting letter showing attendance for Vector WTC 8C Course with a M – Met Vector Requirements
- Assessment Completion and expiry date must be visible
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following - Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8C
- Mita Consulting letter showing attendance for Vector WTC 8C Course with a M – Met Vector Requirements MUSTbe provided
| Issue Date = On evidence Expiry date= On evidence or 2 years from issue date |
|
Power.Document.Vector Electricity Core Instruction WTC 10 Attestation | The required evidence will be one of the following: - Certificate or competency card issued from a NZQA accredited training organisation showing completion of Vector WTC 10
- Downer form for Vector WTC Attestation
- Must show Vector WTC 10
- Must contain comments
- Must be signed by manager
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Date of training completion must be visible
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence date exceeds 2 years, and additional certificate issued from a NZQA showing Vector WTC 10 MUST be provided | Issue Date = On evidence Expiry date= On evidence or 2 years from issue date |
|
Power.Document.Vector Attestation Equipment Type Assessment | The required evidence will be one of the following: - Certificate or competency card issued from a NZQA accredited training organisation showing completion of Vector Electricity Equipment Type Assessment
- Vector Electricity Equipment Type Assessment
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Date of training completion must be visible
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
| Issue Date = as per evidence Expiry date= as per evidence |
|
Power.Document.Vector WTC 1 Attestation with 3 site visits
| The evidence will be one of the following: - Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 7A
- Mita Consulting letter showing attendance for Vector WTC 7A Course with a M – Met Vector Requirements
- Log book showing 3 site visits with manager/supervisor sign off
- Assessment Completion and expiry date must be visible
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
| Issue Date = On evidence Expiry date= Not required |
|
Electrical.Endorsement.Wellington Electricity - U/G Switchgear Types up to 33kV | The required evidence will be one of the following: - Certificate or competency card issued from a NZQA accredited training organisation showing completion of Vector WTC 10
- Downer form for Vector WTC Attestation
- Must show Vector WTC 10
- Must contain comments
- Must be signed by manager
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Date of training completion must be visible
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
| Issue Date = as per evidence Expiry date= as per evidence |
|
Electrical.Endorsement.Wellington Electricity - Switchgear Types - LV Fuse Gear | The required evidence will be one of the following: - Certificate or competency card issued from a NZQA accredited training organisation showing completion of Wellington Electricity - Switchgear Types - LV Fuse Gear
- Downer form for Wellington Electricity
- Must state Switchgear Types - LV Fuse Gear
- Must show Vector WTC 10
- Must contain comments
- Must be signed by manager
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Date of training completion must be visible
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
| Issue Date = as per evidence Expiry date= as per evidence |
|
Electrical.Endorsement.Wellington Electricity - Substation Switchgear Types up to 110kV | The required evidence will be one of the following: - Certificate or competency card issued from a NZQA accredited training organisation showing completion of Wellington Electricity - Switchgear Types - LV Fuse Gear
- Downer form for Vector WTC Attestation
- Must show Vector WTC 10
- Must contain comments
- Must be signed by manager
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Date of training completion must be visible
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
| Issue Date = as per evidence Expiry date= as per evidence |
|
Electrical.Endorsement.Wellington Electricity - Specialist Switchgear Types up to 11kV | The required evidence will be one of the following: - Certificate or competency card issued from a NZQA accredited training organisation showing completion of Vector WTC 10
- Downer form for Vector WTC Attestation
- Must show Vector WTC 10
- Must contain comments
- Must be signed by manager
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Date of training completion must be visible
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
| Issue Date = as per evidence Expiry date= as per evidence |
|
Electrical.Endorsement.Wellington Electricity - Ripple Injection Plant Types | The required evidence will be one of the following: - Certificate or competency card issued from a NZQA accredited training organisation showing completion of Vector WTC 10
- Downer form for Vector WTC Attestation
- Must show Vector WTC 10
- Must contain comments
- Must be signed by manager
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Date of training completion must be visible
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
| Issue Date = as per evidence Expiry date= as per evidence |
|
Electrical.Endorsement.Wellington Electricity - O/H Switchgear Types up to 33kV | The required evidence will be one of the following: - Certificate or competency card issued from a NZQA accredited training organisation showing completion of Vector WTC 10
- Downer form for Vector WTC Attestation
- Must show Vector WTC 10
- Must contain comments
- Must be signed by manager
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Date of training completion must be visible
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
| Issue Date = as per evidence Expiry date= as per evidence |
|
Electrical.Endorsement.Wellington Electricity - Capacitor bank plant types | The required evidence will be one of the following: - Certificate or competency card issued from a NZQA accredited training organisation showing completion of Vector WTC 10
- Downer form for Vector WTC Attestation
- Must show Vector WTC 10
- Must contain comments
- Must be signed by manager
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Date of training completion must be visible
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
| Issue Date = as per evidence Expiry date= as per evidence |
|
Electrical.Work Experience.Wellington Electricity - Electrical Fitting | The required evidence will be one of the following: - Certificate or competency card issued from a NZQA accredited training organisation showing completion of Vector WTC 10
- Downer form for Vector WTC Attestation
- Must show Vector WTC 10
- Must contain comments
- Must be signed by manager
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Date of training completion must be visible
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
| Issue Date = as per evidence Expiry date= as per evidence |
|
Electrical.Certificate.Transpower Permit Recipient | The evidence will be the following: - Certificate showing Permit Recipient For Lines (PRL) or (PR) completion
- Evidence will be issued by Gridskills ONLY
- Course Completion date must be visible
- Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Workforce (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
Where the evidence completion date exceeds 2 years, an additional certificate showing Permit Recipient For Lines (PRL) or (PR) course completion MUST be provided | Issue Date= Course completion date Expiry Date= 2 years from course completion date |
|
Electrical.Refresher.Condition Assessor (CA) & (CAR) | The evidence will be a: - Certificate showing Condition Assessor or refresher Certificate
- Evidence will be issued by Gridskills ONLY
- Course Completion date must be visible
- Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Workforce (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
Where the evidence completion date exceeds 2 years, an additional certificate showing Condition Assessor or refresher course completion MUST be provided | Issue Date= Course completion date Expiry Date=2 years from course completion date |
|
Electrical.Course.Transpower Field Operator (FO) or Electrical.Refresher.Maintenance Switcher (MS) & (MSF) | The evidence will be a: - Certificate showing Maintenance Switcher (MS) or Field Operator (FO) or refresher Certificate
- Evidence will be issued by Gridskills ONLY
- Course Completion date must be visible
- Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Workforce (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
Where the evidence completion date exceeds 2 years, an additional certificate showing Maintenance Switcher (MS) or Field Operator (FO) or refresher course completion MUST be provided | Issue Date= Course completion date Expiry Date=2 years from course completion date |
|
Electrical.Course.Transpower Foundations (F) | The evidence will be a: - Certificate showing Foundations Curriculum Certificate
- Evidence will be issued by Gridskills ONLY
- Course Completion date must be visible
- Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Workforce (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
| Issue Date= Course completion date Expiry Date=Non-expiring |
|
Electrical.Course.Transpower Vegetation Control (VC) | The evidence will be a: - Certificate showing Vegetation Control (VC) course completion
- Evidence will be issued by Gridskills ONLY
- Course Completion date must be visible
- Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Workforce (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
Colour copy or black and white copy is acceptable | Issue Date= Course completion date Expiry Date= 2 years from course completion date |
|
Site.Authorisation.Transpower Land Authorisation | The evidence will be a: · Downer Letter authorisation to enter land from Transpower - Evidence will be issued by Downer ONLY
- Issue date must be visible
- Description of what authorisation covers, list of sites, Asset owner, Downer Contract Manager name and signature
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Workforce (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
Colour copy or black and white copy is acceptable | Issue Date= Docuement completion date Expiry Date= 1 years from course completion date |
|
Electrical.Endorsement.Transpower Technical Expert Workshop | The evidence will be a: - Certificate showing Technical Expert course completion
- Evidence will be issued by Gridskills ONLY
- Course Completion date must be visible
- Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Workforce (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
Colour copy or black and white copy is acceptable | Issue Date= Course completion date Expiry Date= 2 years from course completion date |
|
Electrical.Competency.SF6 Gas - Test and Top-Up | The evidence will be a: - Certificate showing SF6 Test and Top-up course completion
- Evidence will be issued by Gridskills ONLY
- Course Completion date must be visible
- Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Workforce (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
Colour copy or black and white copy is acceptable | Issue Date= Course completion date Expiry Date= Non-Expiring |
|