Competency | Competency Requirements | Upload Requirements | Examples |
---|
Network Operator.Access.SC1000A - Ausgrid - Substation Entry Proof of initial classroom course | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
Required evidence to be uploaded is a form of acceptable evidence that is acceptable for any of the following competencies respective business rule: - Network Operator.Access.SC1000A - Ausgrid - Substation Entry
| - Record the Issue date within Onsite:
- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
- NO EXPIRY DATE
|
|
Network Operator.Access.Proof of attending the initial Access Permit Recipient Restricted course | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
Required evidence to be uploaded is a form of acceptable evidence that is acceptable for any of the following competencies respective business rule: Network Operator.Access.APR0068 - Ausgrid - Access Permit
| - Record the Issue date within Onsite:
- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
- NO EXPIRY DATE
|
|
Network Operator.Access.APR0068 - Ausgrid - Access Permit Recipient (Restricted) APR0068 - Ausgrid - Access Permit Recipient (Restricted) | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
For Ausgrid Training Passport Uploaded document must also include page of passport that shows ‘Ausgrid - Access Permit Recipient (Restricted)’ as having been achieved with: - Ausgrid / Energy Australia stamp being shown on this page
- Date of Training
- Trainer / Assessor Name
- Signature
If an applicant submits documentation that references 'unrestricted' this may be accepted
For Pegasus LMS Issued Certificate: - Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Certificate will show completion of either: Access Permit Recipient (APR) Refresher OR Access Permit Recipient (APR) Restricted
- Certificate will show both Pegasus and Ausgrid Logos
- Date of completion will be shown
| - Record the Issue date within Onsite:
- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
- Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).
| |
Network Operator.Access.SC1000A - Ausgrid - Substation Entry | Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show: - Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
Uploaded document must also include page of passport that shows ‘Substation Entry’ as having been achieved with: - Ausgrid / Energy Australia stamp being shown on this page
- Date of Training
- Trainer / Assessor Name
- Signature
For Pegasus LMS Issued Certificate: - Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Certificate will show completion of either: Substation Entry
- Certificate will show both Pegasus and Ausgrid Logos
- Date of completion will be shown
| - Record the Issue date within Onsite:
- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
| |
Network Operator.Certificate.AMGS0001 - Field Recording of Network Assets | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
- Course code to be listed on certificate to match the nominated coding and title within Onsite: AMGS0001 - Field Recording of Network Assets
- No expiry
| - Record the Issue date within Onsite:
- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
|
|
Network Operator.Certificate.I0102 - Ausgrid - Environmental Awareness | - Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:
- Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant.
- Uploaded document must also include page of passport that shows ‘Environmental’ or Enviro as having been achieved with:
- Ausgrid / Energy Australia stamp being shown on this page
- Date of Training
- Trainer / Assessor Name
- Signature
- Ausgrid Certificate of Completion or screenshot of training is accepted. It must show:
- Environmental Management and Sustainability or Environmental Awareness Assessment
- Contractors Name
- Date of completion
Ausgrid Placeholder Document now accepted for ASP2's. It must show: - Contractors Name
- Date of completion
- Declaration of competence for Network Operator.Certificate.I0102 - Ausgrid - Environmental Awareness
- Name of Authoriser along with date
For Pegasus LMS Issued Certificate: - Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Certificate will show completion of either: Electrical Safety Rules Initial OR Electrical Safety Rules Refresher
- Certificate will show both Pegasus and Ausgrid Logos
- Date of completion will be shown
| Record the Issue date within Onsite: Pegasus Staff click here to read additional crucial business rule information prior to file verification | |
Network Operator.Certificate.M1398 - Streetlight Serving Worker Electrical (Electrically Trained and Qualified) | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
- Course code to be listed on certificate to match the nominated coding and title within Onsite: M1398 - Streetlight Serving Worker Electrical (Electrically Trained and Qualified) also accepted is M1400 or TDDO1440
- No expiry
| Record the Issue date within Onsite:- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
|
|
Network Operator.Certificate.M1397 - Streetlight Serving Worker Electrical (Electrically Trained and Qualified) | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
- Course code to be listed on certificate to match the nominated coding and title within Onsite: M1397 - Streetlight Serving Worker Electrical (Electrically Trained and Qualified) also accepted is M1400 or TTDO1400
- No expiry
| Record the Issue date within Onsite:- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
|
|
Network Operator.Certificate.M1400 - Streetlight Serving Worker Electrical (Electrically Trained and Qualified) | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
- Course code to be listed on certificate to match the nominated coding and title within Onsite: M1400 - Streetlight Serving Worker Electrical (Electrically Trained and Qualified) Or TTDO1400
- No expiry
- Please note M1400 supercedes M1397,M1398,M1399
- Also UET30612 Cert III ESI Power
- Electricity Supply Industry Distribution (Powerline)
- UTT30301, UET30101,UET30206, UET 30209,UTT30301
| Record the Issue date within Onsite: - Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
|
|
Network Operator.Certificate.M1425 - Pole Inspection and Treatment - Theory | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
- Course code to be listed on certificate to match the nominated coding and title within Onsite: M1425 - Pole Inspection and Treatment
- No expiry
| Record the Issue date within Onsite:- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
|
|
Network Operator.Certificate.M1429 - Handling Burnt CCA Poles | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
- Course code to be listed on certificate to match the nominated coding and title within Onsite: M1429 - Handling Burnt CCA Poles
- No expiry
| Record the Issue date within Onsite:- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
|
|
Network Operator.Certificate.M1503 - Ausgrid - Lineworkers Fall Arrest Harness | NOTE: Ausgrid will accept the Certificate III in ESI - Power Systems - Distribution UET30612 NOTE: Ausgrid will accept the Skills Passport with code 1399 - Luminaire Servicing Worker or Skills passport M1400 or TIDO1440 Australian Electricity Supply Industry (ESI) issued skills passport must show: - Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
- loaded document must also include page of passport that shows ‘1399 - Luminaire Servicing Worker’ as having been achieved with:
- Ausgrid / Energy Australia stamp being shown on this page
- Date of Training
- Trainer / Assessor Name
- Signature
| Record the Issue date within Onsite:- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
| |
Network Operator.Certificate.M1806 - Safe Working Aloft | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
- Course code to be listed on certificate to match the nominated coding and title within Onsite: M1806 - Safe Working Aloft
- No expiry
NOTE: Ausgrid will accept: Certificate III in ESI - Power Systems - Distribution Overhead UET30612 Electricity Supply Industry Distribution (Powerline) UTT30301, UET30101,UET30206, UET 30209,UTT30301 | Record the Issue date within Onsite:- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
| |
Network Operator.Certificate.- Ausgrid - Pre-working aloft procedures (NS146) | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
- Course code to be listed on certificate to match the nominated coding and title within Onsite: M1809 - Ausgrid - Pre-working aloft procedures (NS146)
- Other Accepted Competencies are :
- Ausgrid will accept M1397 - Streetlight Serving Worker Electrical. Ausgrid will also accept :Certificate III ESI Distribution (UET30209)
- Cert III in in ESI - Power Systems - Distribution Overhead UET30612
- UET30206 Certificate III in ESI - Distribution
- Electricity Supply Industry Distribution (Powerline)
- UTT30301, UET30101,UET30206, UET 30209,UTT30301
- M1809 and TTDO1809 are equivalent
| Record the Issue date within Onsite:- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
|
|
Network Operator.Certificate.M2170 – Cable Pit Safety and Awareness | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
- Course code to be listed on certificate to match the nominated coding and title within Onsite: M2170 – Cable Pit Safety and Awareness
- No expiry
| Upload Requirements: Record the Issue date within Onsite: - Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
|
|
Network Operator.Certificate.QUAL00066 - GIS Map Reading | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
- Course code to be listed on certificate to match the nominated coding and title within Onsite: QUAL00066 - GIS Map Reading
- No expiry
Pegasus LMS Issued Certificate: - Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Certificate will show completion of: GIS Map Reading
- Certificate will show both Pegasus and Ausgrid Logos
- Date of completion will be shown
| Record the Issue date within Onsite:- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
| |
Network Operator.Certificate.SC1100A - Working Near or Around Underground Cables | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
Accepted Form/s of Evidence: - Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:
- Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
- Uploaded document must include page of passport that shows 'SC1100' ‘SC1100A’ OR 'SC1200' OR 'Work w Live PowerCables in EA' OR 'Working Near Underground Cable' OR 'Working Near U/G Assets' for evidence of Working Near Underground Cables as having been achieved with:
- Ausgrid / Energy Australia stamp being shown on this page
- Date of Training
- Trainer / Assessor Name
- Signature
2. Tafe issued certificate showing completion of 'Work Safely Near Underground Assets - 26919' course 3. RTO issued Card or Certificate showing completion of course in Working Safely Near overhead and underground assets 4. Pegasus LMS Issued Certificate: - Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Certificate will show completion of: Working Near Or Around Underground Cables
- Certificate will show both Pegasus and Ausgrid Logos
- Date of completion will be shown
| Record the Issue date within Onsite:- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
| |
Network Operator.Certificate.SSAB1001 - Ausgrid - Asbestos Awareness | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
- Accepted forms of evidence:
- Ausgrid issued certificate showing completion of SSAB1001 - Ausgrid - Asbestos Awareness
- RTO issued Statement of Attainment showing completion of 'Conduct asbestos assessment associated with removal' (accepted as this is a higher qualification)
- RTO issued Statement of Attainment showing completion of 'Remove Friable Asbestos' (accepted as this is a higher qualification
- NSW Workcover issued licence for 'Asbestos Assessor'
| Record the Issue date within Onsite:- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
| |
Network Operator.Certificate.TTDO1374 - Introduction to overhead line components | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
- Course code to be listed on certificate to match the nominated coding and title within Onsite: TTDO1374 - Introduction to overhead line components
- No expiry
| Record the Issue date within Onsite:- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
|
|
Network Operator.Certificate.TTDO1375 - Line inspection | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
- Course code to be listed on certificate to match the nominated coding and title within Onsite: TTDO1375 - Line inspection
- No expiry
| Record the Issue date within Onsite:- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
|
|
Network Operator.Certificate.TTDO1399 - Luminaire Servicing Worker | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
- Course code to be listed on certificate to match the nominated coding and title within Onsite: TTDO1399 - Luminaire Servicing Worker
- Also accpeted as superceded is M1400
- No expiry
| Record the Issue date within Onsite:- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
| |
Network Operator.Certificate.TTDO1570 - Ausgrid - Application of temporary insulation | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
- Course code to be listed on certificate to match the nominated coding and title within Onsite: TTDO1570 - Ausgrid - Application of temporary insulation
- No expiry
- To be accepted if 1570 is shown
NOTE: Ausgrid will accept Certificate III in ESI Power Systems - Distribution Overhead UET30612 or Ausgrid will also accept the Certificate III ESI Distribution (UET30209) Also Accepted : - Electricity Supply Industry Distribution (Powerline)
- UTT30301, UET30101,UET30206, UET 30209,UTT30301
NOTE: Ausgrid will accept Skills Passport code M1397 - Streetlight Servicing Worker Electrical Australian Electricity Supply Industry (ESI) issued skills passport must show: - Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
- loaded document must also include page of passport that shows ‘M1397 - Streetlight Servicing Worker Electrical’ as having been achieved with:
- Ausgrid / Energy Australia stamp being shown on this page
- Date of Training
- Trainer / Assessor Name
- Signature
| Record the Issue date within Onsite:- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
| |
Network Operator.Certificate.TTDO1804 - Ausgrid - Erection of Earths | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
- Course code to be listed on certificate to match the nominated coding and title within Onsite: TTDO1804 - Ausgrid - Erection of Earths
- No expiry
| Record the Issue date within Onsite:- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
|
|
Network Operator.Certificate.TTGE1574 - Neutral and Phase Identification Using Test Lamps | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
- Course code to be listed on certificate to match the nominated coding and title within Onsite: TTGE1574 - Neutral and Phase Identification Using Test Lamps
- No expiry
NOTE: Ausgrid will accept Certificate III in ESI - Power Systems - Distribution Overhead UET30612 or : Ausgrid will also accept the Certificate III ESI Distribution (UET30209) or passport with code competency of 1804 or cert III ESI Distribution Powerlin 30101 - Electricity Supply Industry Distribution (Powerline)
- UTT30301, UET30101,UET30206, UET 30209,UTT30301
SOA for UETTDRRF11A- Testing of Connections to LV Electricity Networks | Record the Issue date within Onsite:- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
| |
Network Operator.Certificate.TTPO0003 - Private Pole and Aerial Mains Inspection: Bushfire Risks | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
- Course code to be listed on certificate to match the nominated coding and title within Onsite: TTPO0003 - Private Pole and Aerial Mains Inspection: Bushfire Risks
- No expiry
| Record the Issue date within Onsite:- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
|
|