Visy Business Rules | Engineering

Engineering.Advanced Diploma.Engineering

• Applicants name to be displayed on uploaded evidence and to match applicants registered name
• Recognised Training Institution name to be displayed on document (or to be issued by State Government body)
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
• Name and / or signature of issuer to be shown
• Document / Certificate / Number to be shown
• Completion date or issue date must be displayed
• No expiry

• The date of completion on the evidence should be recorded as the Issue Date in Onsite

Not Accepted:

• Fitting and Turning Qualifications

Engineering.Bachelor Degree.Chemical Engineering

• Applicants name to be displayed on uploaded evidence and to match applicants registered name
• Recognised Training Institution name to be displayed on document (or to be issued by State Government body)
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
• Name and / or signature of issuer to be shown
• Document / Certificate / Number to be shown
• Completion date or issue date must be displayed
• No expiry

For overseas / international engineering degree qualifications to be accepted they need to either be recognised under the:

• Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
• Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

• The date of completion on the evidence should be recorded as the Issue Date in Onsite

Not Accepted:

• Fitting and Turning Qualifications

Engineering.Bachelor Degree.Electrical Engineering

• Applicants name to be displayed on uploaded evidence and to match applicants registered name
• Recognised Training Institution name to be displayed on document (or to be issued by State Government body)
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
• Name and / or signature of issuer to be shown
• Document / Certificate / Number to be shown
• Completion date or issue date must be displayed
• No expiry

For overseas / international engineering degree qualifications to be accepted they need to either be recognised under the:

• Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
• Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

• The date of completion on the evidence should be recorded as the Issue Date in Onsite

Not Accepted:

• Fitting and Turning Qualifications

Engineering.Bachelor Degree.Engineering

• Applicants name to be displayed on uploaded evidence and to match applicants registered name
• Recognised Training Institution name to be displayed on document (or to be issued by State Government body)
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
• Name and / or signature of issuer to be shown
• Document / Certificate / Number to be shown
• Completion date or issue date must be displayed
• No expiry

For overseas / international engineering degree qualifications to be accepted they need to either be recognised under the:

• Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
• Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

• The date of completion on the evidence should be recorded as the Issue Date in Onsite

Not Accepted:

• Fitting and Turning Qualifications

Engineering.Bachelor Degree.Mechanical Engineering

• Applicants name to be displayed on uploaded evidence and to match applicants registered name
• Recognised Training Institution name to be displayed on document (or to be issued by State Government body)
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
• Name and / or signature of issuer to be shown
• Document / Certificate / Number to be shown
• Completion date or issue date must be displayed
• No expiry

For overseas / international engineering degree qualifications to be accepted they need to either be recognised under the:

• Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
• Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

• The date of completion on the evidence should be recorded as the Issue Date in Onsite

Not Accepted:

• Fitting and Turning Qualifications

Engineering.Certificate II.Engineering - Production Technology

• Applicants name to be displayed on uploaded evidence and to match applicants registered name
• Recognised Training Institution name to be displayed on document (or to be issued by State Government body)
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
• Name and / or signature of issuer to be shown
• Document / Certificate / Number to be shown
• Completion date or issue date must be displayed
• No expiry

Not Accepted

• Craft Certificate - needs to be uploaded with SOC

• The date of completion on the evidence should be recorded as the Issue Date in Onsite

Not Accepted:

• Fitting and Turning Qualifications

Engineering.Certificate III.Engineering - Composites Trade

• Applicants name to be displayed on uploaded evidence and to match applicants registered name
• Recognised Training Institution name to be displayed on document (or to be issued by State Government body)
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
• Name and / or signature of issuer to be shown
• Document / Certificate / Number to be shown
• Completion date or issue date must be displayed
• No expiry

Not Accepted

• Craft Certificate - needs to be uploaded with SOC

• The date of completion on the evidence should be recorded as the Issue Date in Onsite

Not Accepted:

• Fitting and Turning Qualifications

Engineering.Certificate III.Engineering - Production Systems

• Applicants name to be displayed on uploaded evidence and to match applicants registered name
• Recognised Training Institution name to be displayed on document (or to be issued by State Government body)
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
• Name and / or signature of issuer to be shown
• Document / Certificate / Number to be shown
• Completion date or issue date must be displayed
• No expiry

Not Accepted

• Craft Certificate - needs to be uploaded with SOC

• The date of completion on the evidence should be recorded as the Issue Date in Onsite

Not Accepted:

• Fitting and Turning Qualifications

Engineering.Certificate III.Engineering - Technical

• Applicants name to be displayed on uploaded evidence and to match applicants registered name
• Recognised Training Institution name to be displayed on document (or to be issued by State Government body)
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
• Name and / or signature of issuer to be shown
• Document / Certificate / Number to be shown
• Completion date or issue date must be displayed
• No expiry

Not Accepted

• Craft Certificate - needs to be uploaded with SOC

• The date of completion on the evidence should be recorded as the Issue Date in Onsite

Not Accepted:

• Fitting and Turning Qualifications

Engineering.Certificate IV.Engineering

• Applicants name to be displayed on uploaded evidence and to match applicants registered name
• Recognised Training Institution name to be displayed on document (or to be issued by State Government body)
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
• Name and / or signature of issuer to be shown
• Document / Certificate / Number to be shown
• Completion date or issue date must be displayed
• No expiry

Not Accepted

• Craft Certificate - needs to be uploaded with SOC

• The date of completion on the evidence should be recorded as the Issue Date in Onsite

Not Accepted:

• Fitting and Turning Qualifications

Engineering.Diploma.Engineering - Advanced Trade

• Applicants name to be displayed on uploaded evidence and to match applicants registered name
• Recognised Training Institution name to be displayed on document (or to be issued by State Government body)
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
• Name and / or signature of issuer to be shown
• Document / Certificate / Number to be shown
• Completion date or issue date must be displayed
• No expiry

• The date of completion on the evidence should be recorded as the Issue Date in Onsite

Not Accepted:

• Fitting and Turning Qualifications

Engineering.Diploma.Engineering - Technical

• Applicants name to be displayed on uploaded evidence and to match applicants registered name
• Recognised Training Institution name to be displayed on document (or to be issued by State Government body)
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
• Name and / or signature of issuer to be shown
• Document / Certificate / Number to be shown
• Completion date or issue date must be displayed
• No expiry

• The date of completion on the evidence should be recorded as the Issue Date in Onsite

Not Accepted:

• Fitting and Turning Qualifications

Engineering.Statement of Attainment.Practical hazardous areas for engineers and technicians

• Applicants name to be displayed on uploaded evidence and to match applicants registered name
• Certificate is to display course completion of: Practical hazardous areas for engineers and technicians
• Certificate or Card showing competency title is accepted
• Must be issued by a Registered Training Organisation (RTO)
• Black and white or coloured copy of evidence can be accepted

• The date of completion on the evidence should be recorded as the Issue Date in Onsite

Electrical.Course.ABB ZS1 and MH2 Type Switchgear Operations

• Applicants name to be displayed on uploaded evidence and to match applicants registered name
• Certificate is to display course completion of: ABB ZS1 and MH2 Type Switchgear Operations
• Certificate or Card showing competency title is accepted
• Must be issued by a Registered Training Organisation (RTO)
• Black and white or coloured copy of evidence can be accepted

• The date of completion on the evidence should be recorded as the Issue Date in Onsite

Engineering & Design.Statement of Competency.Qualified

The Visy statement of competency form can be downloaded by clicking HERE

• Applicant name on Statement of Competency evidence to match the name of the registered applicant
• Pegasus Visy Statement of Competency Template to be used
• All fields to be complete
• Direct Managers signature to be present (cannot be the contractor)

Note: Company Directors are the only individuals that can sign off their own Statement of Comeptency

• There is no requirement to record and Issue date or an expiration date for this competency in Onsite