Pegasus Facility & Utilities Management Business Rules
Page tree
Skip to end of metadata
Go to start of metadata

 


CompetencyCompetency RequirementsUpload RequirementsExamples
Network Operator.Certificate.Vegetation Worker In-field Audit

  • Ausgrid issued certificate: ‘CERTIFICATE OF INFIELD AUDIT COMPLIANCE’
  • Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • Business Name on Certificate to match the organisation registered.
  • Documentation which has been found to be subject to alterations will not be accepted.
  • The attached document can be accepted in the interim.
  • Issue Date = as per certification
  • Expiry Date = 12 months after issue date
  • Interim Document =  2 week validity period. i.e. expires 2 weeks after submitted

Electrical.Certificate of Attendance.Proof of attending the initial Electrical Safety Rules Course

For Pegasus LMS Issued Certificate:

  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Certificate will show completion of: Electrical Safety Rules Initial
  • Certificate will show both Pegasus and Ausgrid Logos
  • Date of completion will be shown

For the Skills Passport:

Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:

Must include either a page of the passport document that shows the applicants name OR include a copy of the applicant’s photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant

Uploaded document must also include page of passport that shows all Ausgrid competencies – F01, F09 AND Environmental Awareness and/or ESR Initial as having been achieved with:

    • Ausgrid / Energy Australia stamp being shown on this page
    • Date of Training
    • Trainer / Assessor Name
    • Signature

NOTE: From 28.10.2020 if there is a signed sticker instead of a stamp with the trainer’s name with the relevant competency listed, it can be approved:

  • Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date
  • NO EXPIRY DATE

Electrical.Certificate II.Asset Inspection and Testing
  •  Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.
  • RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment.
  • Recognised Training Institution’s name to be displayed on document.
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Accepted Course Titles / Codes:
  • UET20621
  • UET20619
  • UET20612
  • No expiry
  • Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.
NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Expiry date = none


Electrical.Certificate III.UEE30811 - Certificate III in Electrotechnology Electrician
  • Applicants name to be shown on documentation
  • Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
  • Recognised Training Institution name to be displayed on document
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Accepted course codes:
    • UEE30811
    • UTE31199
  • Document / Certificate / Number
  • No expiry
  • Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date

Electrical.Certificate III.UET30512 - Certificate III in ESI - Power Systems - Transmission Overhead

  • Applicants name to be shown on documentation
  • Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
  • Recognised Training Institution name to be displayed on document
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
  • Document / Certificate / Number
  • No expiry

For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

  • Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date

Electrical.Certificate III.UET30612 - Certificate III in ESI - Power Systems - Distribution
  • Applicants name to be shown on documentation
  • Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
  • Recognised Training Institution name to be displayed on document
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Accepted course codes:
    • UET30612
    • UET30206
    • UET30209
    • UETT30101
    • UTT30101
    • UTT30301
    • UET30619
    • UET30621
    • Electricity Supply Industry Distribution (Powerline)
  • Document / Certificate / Number
  • No expiry
  • Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date

Certificate II in ESI - Powerline Vegetation Control

    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
    • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
    • Documentation which has been found to be subject to alterations will not be accepted.
    • RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
    • Recognised Training Institution’s name to be displayed on document.
    • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
    • Completion date or issue date must be displayed
    • Accepted Course Titles / Codes:
      • UET20321
      • UET20319
      • UET20312
      • UET20110
      • UET20109
    • No expiry
    • Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

     For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

  • The date of completion on the evidence should be recorded as the Issue Date in Pegasus

    Expiry date = none

Electrical.Certificate III.UET30812 - Certificate III in ESI - Power Systems - Distribution Cable Jointing
  • Applicants name to be shown on documentation
  • Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
  • Recognised Training Institution name to be displayed on document
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Accepted course code/s:

    • UETTDRVC25 UTT30301 - Certificate III in ESI - Cable Jointing (Powerline)

    • UET30812 - Certificate III in ESI - Power Systems - Distribution Cable Jointing
  • Completion date or issue date must be displayed
  • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
  • Document / Certificate / Number
  • No expiry

For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

Record the Issue date within Onsite:
  • Completion date - if listed on certificate (this completion date is always used when displayed)
  • Issue date - If only an issue date is listed please enter this as the issue date

Qualification.Certificate.Qualified Supervisor Certificate - Electrical Work

  • Applicants name to be shown on documentation
  • Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
  • Recognised Training Institution name to be displayed on document
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
  • Document / Certificate / Number
  • No expiry

For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

Record the Issue date within Onsite:
  • Completion date - if listed on certificate (this completion date is always used when displayed)
  • Issue date - If only an issue date is listed please enter this as the issue date

Electrical.Certificate III. Certificate III in ESI - Distribution Underground
  •  Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.
  • RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
  • Recognised Training Institution’s name to be displayed on document.
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Accepted Course Titles / Codes:
    • UET30821 - Certificate III in ESI - Distribution Underground
    • UET30812 - Certificate III in ESI - Power Systems - Distribution Cable Jointing
    • UET30819 - Certificate III in ESI - Power Systems - Distribution Cable Jointing
    • UET30409 - Certificate III in ESI - Cable Jointing
    • UET30406 - Certificate III in ESI - Cable Jointing
    • Electricity Supply Industry Cable Jointing (Power Line)
  • Pegasus Document / Certificate / Number
  • No expiry
  • Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

  •  For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

  • Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;

    Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Expiry date = none

Electrical.Statement of Attainment.Perform a ground-based tree defect evaluation

  •  Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.
  • RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
  • Recognised Training Institution’s name to be displayed on document.
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Accepted Course Titles / Codes:
    • AHCARB408
    • AHCARB403
  • No expiry
  • Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

 NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Expiry date = none


CompetencyCompetency RequirementsUpload RequirementsExamples
Electrical.Licence.NSW

When Licence is uploaded:

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • ‘Electrician’ or similar to be listed
  • Screenshots from websites are not accepted - Must be copy of the Licence
  • Must be issued by a relevant Australian state government authority with corresponding logo shown on licence EG NSW Department of Fair Trading
  • Black and white or coloured copy of evidence can be accepted
  • Supervisor licence can be accepted for the Electrical Contractor licence
  • Screenshots of valid Licence from mobile app or www.onegov.nsw.gov.au can be accepted

When Invoice (For new contractor Licence) has been uploaded:

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • ‘Electrician’ or similar to be listed
  • Date of receipt to be displayed on the invoice
  • Contractor number to be displayed on document
  • Must be issued by relevant state government authority
  • Black and white or coloured copy of evidence can be accepted
  • Screenshots of valid Licence from mobile app can be accepted but must be verified on the website https://www.onegov.nsw.gov.au/publicregister/#/publicregister/search/Trades
When Licence is uploaded:
  • Expiry Date = The date of expiration on the evidence

When Invoice (For new contractor Licence) has been uploaded:

  • The date of expiration on the evidence should be recorded as the date which is calculated to be 4x weeks from the date of renewal completion

CompetencyCompetency RequirementsUpload RequirementsExamples
Electrical.Statement of Attainment.Booking confirmation Electrical Statement of Attainment - First Aid in an ESI Environment

When Booking Confirmation is Uploaded:

  • This competency now accepts a Booking confirmation for the course they are completing 
  • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
  • Applicants name to be shown on document
  • RTO Name, Code and Logo
  • Units of competency code and name, date booked for
  • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training

Electrical.Statement of Attainment- First Aid in an ESI Environment

For the Statement of Attainment or Transcript:


  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.
  • RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
  • Recognised Training Institution’s name to be displayed on document
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Accepted Course Titles / Codes:
    • UETDRRF007
    • UETTDRRF10 (Completion date must be prior to 20/09/2022)
  • 12-month expiry
  • Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements

 For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Issue date - If only an issue date is listed, please enter this as the issue date

Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4-week expiry for this documentation).

Statement of Attainment:

Skills Passport:

SOA TAFE NSW

Electrical.Statement of Attainment.Booking confirmation  – Testing of Connections to LV Electricity Networks

When Booking Confirmation is Uploaded:

  • This competency now accepts a Booking confirmation for the course they are completing 
  • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
  • Applicants name to be shown on document
  • RTO Name, Code and Logo
  • Units of competency code and name, date booked for
  • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training

Electrical.Statement of Attainment. Joint, terminate and maintain low voltage underground polymeric cable

  •  Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.
  • RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
  • Recognised Training Institution’s name to be displayed on document.
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Accepted Course Titles / Codes:
    • UETDRDU015
    • UETTDRCJ26
    • UETTDRCJ26A
    • UETTDRCJ06B
    • UETTDRCJ06A
  • Passport document showing stamp for Underground Services Cat 2
  • Tafe issued certificate displaying 'Underground Service Mains – Installation (Cat 2) Code – 31755’
  • Tafe issued certificate or transcript displaying '7793BS - Cable jointing 1 - LV Polymeric' and '7793BT - Cable jointing 2 - HV Polymeric'
  • No expiry
  • Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

 For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

NOTE: If there is a signed sticker instead of a stamp with the trainers name with the relevant competency listed, it can be approved

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Expiry date = none


Electrical.Statement of Attainment – Testing of Connections to LV Electricity NetworksFor the Statement of Attainment or Transcript:
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
  •  RTO Name, Code and Logo
  •  Name of Applicant
  • Units of competency code and name, date completed
  • Date certificate issued
  • Authorised person name or title (does not necessarily need a signature)
  • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
  • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
  • **RTO registration must only have been current at the time of training completion / awarding the document
  • Document verifier to ensure the Issue of this document is an RTO.

  • From 17/9/2021 Tafe NSW will issue interim Knwledge assesment ( see example document labelled SOA Tafe NSW)

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code


For the Skills Passport:

  • Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:
      • Applicant Name
      • Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
  • Uploaded document must also include page of passport that shows ‘UETTDRRF11 or UETTDRRF11A’ as having been achieved with:
      • Ausgrid / Energy Australia stamp being shown on this page
      • Date of Training
      • Trainer / Assessor Name
      • Signature

NOTE: If there is a signed sticker instead of a stamp with the trainers name with the relevant competency listed, it can be approved

Record the Issue date within Onsite:
  • Completion date - if listed on certificate (this completion date is always used when displayed)
  • Issue date - If only an issue date is listed please enter this as the issue date
  • Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).

Pegasus Staff click here to read additional crucial business rule information prior to file verification

SOA TAFE NSW

Electrical.Statement of Attainment.UETTDREL13 - Comply with environmental and incidental response procedures

For the Statement of Attainment or Transcript:
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
  •  RTO Name, Code and Logo
  •  Name of Applicant
  • Units of competency code and name, date completed
  • Date certificate issued
  • Authorised person name or title (does not necessarily need a signature)
  • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
  • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
  • There is no expiry date on a Statement of Attainment or Transcript.
  • **RTO registration must only have been current at the time of training completion / awarding the document
  • Document verifier to ensure the Issue of this document is an RTO.
  • Accepted Course Titles / Codes:

    • UETDREL002

    • UETTDREL13

NOTE: RPL can be accepted for this competency

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

Record the Issue date within Onsite:
  • Completion date - if listed on certificate (this completion date is always used when displayed)
  • Issue date - If only an issue date is listed please enter this as the issue date

Electrical.Statement of Attainment. Work safely in the vicinity of live electrical apparatus as a non-electrical worker 

  •  Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.
  • RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
  • Recognised Training Institution’s name to be displayed on document.
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Accepted Course Titles / Codes:
    • UETDREL006
    • UETDREL005
    • UETDREL004
    • UETTDREL14
    • UETTDREL14A
    • UETTDREL16
    • UETTDREL16A
    • UETTDREL04B
    • UETTDREL04A
  • 12-month expiry
  • Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Issue date - If only an issue date is listed, please enter this as the issue date

Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4-week expiry for this documentation).

Electrical.Statement of Attainment. Work safely in the vicinity of live electrical apparatus

  •  Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.
  • RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
  • Recognised Training Institution’s name to be displayed on document.
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Accepted Course Titles / Codes:
    • UETDREL005
    • UETTDREL14
    • UETTDREL14A
    • UETTDREL16
    • UETTDREL16A
    • UETTDREL04B
    • UETTDREL04A
  • Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Issue date - If only an issue date is listed, please enter this as the issue date

Non-Expiring

Electrical.Statement of Attainment- Use asset inspection equipment

  •  Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.
  • RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment.
  • Recognised Training Institution’s name to be displayed on document.
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Accepted Course Titles / Codes:
  • UETDRAI005
  • UETTDREL17
  • UETTDREL17A
  • No expiry
  • Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

NOTE: RPL can be accepted for this competency

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details.

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Expiry date = none

Electrical.Statement of Attainment.UETTDREL17 - Operate asset inspection machinery and equipment near live electrical apparatus

For the Statement of Attainment or Transcript:
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
  •  RTO Name, Code and Logo
  •  Name of Applicant
  • Units of competency code and name, date completed
  • Date certificate issued
  • Authorised person name or title (does not necessarily need a signature)
  • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
  • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
  • There is no expiry date on a Statement of Attainment or Transcript.
  • **RTO registration must only have been current at the time of training completion / awarding the document
  • Document verifier to ensure the Issue of this document is an RTO.

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

Record the Issue date within Onsite:
  • Completion date - if listed on certificate (this completion date is always used when displayed)
  • Issue date - If only an issue date is listed please enter this as the issue date

Electrical.Statement of Attainment.UETTDREL18 - Inspect and treat poles and inspect electrical apparatus

For the Statement of Attainment or Transcript:
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
  •  RTO Name, Code and Logo
  •  Name of Applicant
  • Units of competency code and name, date completed
  • Date certificate issued
  • Authorised person name or title (does not necessarily need a signature)
  • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
  • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
  • There is no expiry date on a Statement of Attainment or Transcript.
  • **RTO registration must only have been current at the time of training completion / awarding the document
  • Document verifier to ensure the Issue of this document is an RTO.
  • Accepted Course Titles / Codes:
    • UETTDREL18

    • UETDRAI001 

NOTE: RPL can be accepted for this competency

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

Record the Issue date within Onsite:
  • Completion date - if listed on certificate (this completion date is always used when displayed)
  • Issue date - If only an issue date is listed please enter this as the issue date

Electrical.Statement of Attainment.UETTDREL19 - Identify & interpret characteristics of elec apparatus associated with power industry 

For the Statement of Attainment or Transcript:

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
  •  RTO Name, Code and Logo
  •  Name of Applicant
  • Units of competency code and name, date completed
  • Date certificate issued
  • Authorised person name or title (does not necessarily need a signature)
  • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
  • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
  • There is no expiry date on a Statement of Attainment or Transcript.
  • **RTO registration must only have been current at the time of training completion / awarding the document
  • Document verifier to ensure the Issue of this document is an RTO.
  • Accepted Course Titles / Codes:
  • UETDRAI002 - Inspect poles, hardware and electrical apparatus.
  • No expiry
  • Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

NOTE: RPL can be accepted for this competency

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code


The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Expiry date = none
Electrical.Statement of Attainment.UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work

For the Statement of Attainment or Transcript:

  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
  • RTO Name, Code and Logo
  • Name of Applicant
  • Accepted units of competency:
    • UETTDRRF01 - Issued by Aurecon is accepted. Please see the attached example.

    • UETDRMP002 - ESI safety rules for work on, near or in the vicinity of electrical apparatus

    • UETSS00019
    • UETSS00037
  • From 17/9/2021 Tafe NSW will issue interim Knwledge assesment ( see example document labelled SOA Tafe NSW)

NOTE: All ASP1 authorisations - Ausgrid’s Electrical Safety Rules UETTDRRF01 training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised.

NOTE: All ASP2 authorisations - must complete their initial Ausgrid Electrical Safety Rules UETTDRRF01 training with Ausgrid’s Training Group. After the initial training, the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned Electrical Safety Rules UETTDRRF01 training.

TAFE certificates supplied for ASP2 must state 800- 0326W Ausgrid ESR and course code UETTDRRF01 marked as satisfactory.

Where an individual holds both Level 1 & Level 2 ASP authorisations, Ausgrid delivered Electrical Safety Rules UETTDRRF01 must be delivered through Ausgrid’s Training Group only


  • Authorised person name or title (does not necessarily need a signature)
  • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
  • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

  • Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid aligned version of ‘UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work’ has been completed.

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

NOTE: Course code has changed to UETDRMP002 - ESI safety rules for work on, near or in the vicinity of electrical apparatus

For the Skills Passport:

Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:

Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant

Uploaded document must also include page of passport that shows UETTDRRF01 or ESI Safety Rules or ESR as having been achieved with:

    • Ausgrid / Energy Australia stamp being shown on this page
    • Date of Training
    • Trainer / Assessor Name
    • Signature

NOTE: From 28.10.20220 if there is a signed sticker instead of a stamp with the trainers name with the relevant competency listed, it can be approved:

NOTE: Course code has changed to UETDRMP002 - ESI safety rules for work on, near or in the vicinity of electrical apparatus

For Pegasus LMS Issued Certificate:

  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Certificate will show completion of either: Electrical Safety Rules Initial OR Electrical Safety Rules Refresher
  • Certificate will show both Pegasus and Ausgrid Logos
  • Date of completion will be shown
Record the Issue date within Onsite:

SOA TAFE NSW


lectrical.Statement of Attainment - Perform Pole Top Rescue or Booking confirmation

When Booking Confirmation is Uploaded:

  • This competency now accepts a Booking confirmation for the course they are completing 
  • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
  • Applicants name to be shown on document
  • RTO Name, Code and Logo
  • Units of competency code and name, date booked for
  • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training

Electrical.Statement of Attainment - Perform Pole Top Rescue 

For the Statement of Attainment or Transcript:
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
  •  RTO Name, Code and Logo
  •  Name of Applicant
  • Units of competency code and name, date completed
  • Date certificate issued
  • Authorised person name or title (does not necessarily need a signature)
  • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
  • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
  • **RTO registration must only have been current at the time of training completion / awarding the document
  • Document verifier to ensure the Issue of this document is an RTO.

  • From 17/9/2021 Tafe NSW will issue interim Knwledge assesment ( see example document labelled SOA Tafe NSW)

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code


For the Skills Passport:

  • Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:
      • Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
  • Uploaded document must also include page of passport that shows ‘UETTDRRF02’ or 'UETDRRF003' as having been achieved with:
      • Ausgrid / Energy Australia stamp being shown on this page
      • Date of Training
      • Trainer / Assessor Name
      • Signature

NOTE: If there is a signed sticker instead of a stamp with the trainers name with the relevant competency listed, it can be approved

Record the Issue date within Onsite:

SOA TAFE NSW

Electrical.Statement of Attainment - LV Release & Rescue from an EWP or Booking confirmation

When Booking Confirmation is Uploaded:

  • This competency now accepts a Booking confirmation for the course they are completing 
  • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
  • Applicants name to be shown on document
  • RTO Name, Code and Logo
  • Units of competency code and name, date booked for
  • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training

Electrical.Statement of Attainment- LV Release & Rescue from an EWP

For the Statement of Attainment or Transcript:

  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.
  • RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
  • Recognised Training Institution’s name to be displayed on document
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Accepted Course Titles / Codes:
    • UETDRRF002
    • UETTDRRF03 (Completion date must be prior to 20/09/2022)
  • 12-month expiry
  • Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements

 For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code


The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Issue date - If only an issue date is listed, please enter this as the issue date

Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4-week expiry for this documentation).

SOA TAFE NSW

Electrical.Statement of Attainment.UETTDRRF04 - Perform tower rescue Or Booking confirmation

When Booking Confirmation is Uploaded:

  • This competency now accepts a Booking confirmation for the course they are completing 
  • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
  • Applicants name to be shown on document
  • RTO Name, Code and Logo
  • Units of competency code and name, date booked for
  • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training

Electrical.Statement of Attainment.UETTDRRF04 - Perform tower rescue

For the Statement of Attainment or Transcript:
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
  •  RTO Name, Code and Logo
  •  Name of Applicant
  • Units of competency code and name, date completed
  • Date certificate issued
  • Authorised person name or title (does not necessarily need a signature)
  • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
  • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
  • There is no expiry date on a Statement of Attainment or Transcript.
  • **RTO registration must only have been current at the time of training completion / awarding the document
  • Document verifier to ensure the Issue of this document is an RTO.

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

Record the Issue date within Onsite:
  • Completion date - if listed on certificate (this completion date is always used when displayed)
  • Issue date - If only an issue date is listed please enter this as the issue date

Electrical.Statement of Attainment.UETTDRRF05 - Perform Rescue from Switchyard Structures at Heights  Or Booking confirmation

When Booking Confirmation is Uploaded:

  • This competency now accepts a Booking confirmation for the course they are completing 
  • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
  • Applicants name to be shown on document
  • RTO Name, Code and Logo
  • Units of competency code and name, date booked for
  • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training

Electrical.Statement of Attainment.UETTDRRF05 - Perform Rescue from Switchyard Structures at Heights

For the Statement of Attainment or Transcript:
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
  •  RTO Name, Code and Logo
  •  Name of Applicant
  • Units of competency code and name, date completed
  • Date certificate issued
  • Authorised person name or title (does not necessarily need a signature)
  • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
  • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
  • There is no expiry date on a Statement of Attainment or Transcript.
  • **RTO registration must only have been current at the time of training completion / awarding the document
  • Document verifier to ensure the Issue of this document is an RTO.

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

Record the Issue date within Onsite:
  • Completion date - if listed on certificate (this completion date is always used when displayed)
  • Issue date - If only an issue date is listed please enter this as the issue date

Electrical.Statement of Attainment.Booking confirmation -  - Perform rescue from a live LV panel

When Booking Confirmation is Uploaded:

  • This competency now accepts a Booking confirmation for the course they are completing 
  • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
  • Applicants name to be shown on document
  • RTO Name, Code and Logo
  • Units of competency code and name, date booked for
  • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training

Electrical.Statement of Attainment. - Perform rescue from a live LV panel

For the Statement of Attainment or Transcript:

  •  Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.
  • RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
  • Recognised Training Institution’s name to be displayed on document
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Accepted Course Titles / Codes:
    • UETDRRF004
    • UETTDRRF06 (Completion date must be prior to 20/09/2022)
  • 12-month expiry
  • Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements

 For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Issue date - If only an issue date is listed, please enter this as the issue date

Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4-week expiry for this documentation).

SOA TAFE NSW

Electrical.Statement of Attainment.UETTDRRF07 - Perform cable pit/trench/excavation rescue or Booking confirmation

When Booking Confirmation is Uploaded:

  • This competency now accepts a Booking confirmation for the course they are completing 
  • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
  • Applicants name to be shown on document
  • RTO Name, Code and Logo
  • Units of competency code and name, date booked for
  • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training

Electrical.Statement of Attainment.UETTDRRF07 - Perform cable pit/trench/excavation rescue

For the Statement of Attainment or Transcript:
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
  •  RTO Name, Code and Logo
  •  Name of Applicant
  • Units of competency code and name, date completed
  • Date certificate issued
  • Authorised person name or title (does not necessarily need a signature)
  • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
  • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
  • There is no expiry date on a Statement of Attainment or Transcript.
  • **RTO registration must only have been current at the time of training completion / awarding the document
  • Document verifier to ensure the Issue of this document is an RTO.

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

Record the Issue date within Onsite:
  • Completion date - if listed on certificate (this completion date is always used when displayed)
  • Issue date - If only an issue date is listed please enter this as the issue date

Electrical.Statement of Attainment  - CCD Release & Rescue from an EWP or Booking confirmation

When Booking Confirmation is Uploaded:

  • This competency now accepts a Booking confirmation for the course they are completing 
  • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
  • Applicants name to be shown on document
  • RTO Name, Code and Logo
  • Units of competency code and name, date booked for
  • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training

Electrical.Statement of Attainment UETTDRRF08B - CCD Release & Rescue from an EWP


For the Statement of Attainment or Transcript:
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
  •  RTO Name, Code and Logo
  •  Name of Applicant
  • Units of competency code and name, date completed
  • Date certificate issued
  • Authorised person name or title (does not necessarily need a signature)
  • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
  • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
  • **RTO registration must only have been current at the time of training completion / awarding the document
  • Document verifier to ensure the Issue of this document is an RTO.

  • From 17/9/2021 Tafe NSW will issue interim Knwledge assesment ( see example document labelled SOA Tafe NSW)

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code


For the Skills Passport:

  • Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:
  • Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
  • Uploaded document must also include page of passport that shows ‘UETTDRRF08B’ as having been achieved with:
      • Ausgrid / Energy Australia stamp being shown on this page
      • Date of Training
      • Trainer / Assessor Name
      • Signature

NOTE: If there is a signed sticker instead of a stamp with the trainers name with the relevant competency listed, it can be approved

Record the Issue date within Onsite:
  • Completion date - if listed on certificate (this completion date is always used when displayed)
  • Issue date - If only an issue date is listed please enter this as the issue date
  • Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).

Pegasus Staff click here to read additional crucial business rule information prior to file verification

SOA TAFE NSW

Electrical.Statement of Attainment- Apply access procedures to work on or near electrical network infrastructure

For the Statement of Attainment or Transcript:
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
  •  RTO Name, Code and Logo
  •  Name of Applicant
  • Units of competency code and name, date completed
  • Date certificate issued
  • Authorised person name or title (does not necessarily need a signature)
  • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
  • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
  • **RTO registration must only have been current at the time of training completion / awarding the document
  • Document verifier to ensure the Issue of this document is an RTO.

  • From 17/9/2021 Tafe NSW will issue interim Knwledge assesment ( see example document labelled SOA Tafe NSW)

  •  Additional BR information for ASP pending data only; Not Ausgrid Partners

    NOTE: All ASP1 authorisations - Ausgrid’s Electrical Safety Rules UETTDRRF09 training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised.

    NOTE: All ASP2 authorisations - must complete their initial Ausgrid Electrical Safety Rules UETTDRRF09 training with Ausgrid’s Training Group. After the initial training, the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned Electrical Safety Rules UETTDRRF09 training.

    TAFE certificates supplied for ASP2 must state 800- 0326W Ausgrid ESR and course code UETTDRRF09 marked as satisfactory.

    Where an individual holds both Level 1 & Level 2 ASP authorisations, Ausgrid delivered Electrical Safety Rules UETTDRRF09 must be delivered through Ausgrid’s Training Group only

  • Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid aligned version of ‘UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure’ has been completed.

NOTE: Course code has changed to UETDRMP001 - Apply access authority procedures to work on or near electrical apparatus

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

For the Skills Passport:

  • Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:
      • Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
  • Uploaded document must also include page of passport that shows ‘UETTDRRF09 or UETTDRRF09B ’ or 'Apply Access Procedures' or 'Network Access Procedures' as having been achieved with:
      • Ausgrid / Energy Australia stamp being shown on this page
      • Date of Training
      • Trainer / Assessor Name
      • Signature

NOTE: Course code has changed to UETDRMP001 - Apply access authority procedures to work on or near electrical apparatus


For Pegasus LMS Issued Certificate:

  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Certificate will show completion of either: Electrical Safety Rules Initial OR Electrical Safety Rules Refresher
  • Certificate will show both Pegasus and Ausgrid Logos
  • Date of completion will be shown


NOTE: From 28.10.20220 if there is a signed sticker instead of a stamp with the trainers name with the relevant competency listed, it can be approved:





Record the Issue date within Onsite:
  • Completion date - if listed on certificate (this completion date is always used when displayed)
  • Issue date - If only an issue date is listed please enter this as the issue date
  • Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).

Pegasus Staff click here to read additional crucial business rule information prior to file verification

SOA TAFE NSW

Electrical.Statement of Attainment.Control vegetation in the vicinity of live electrical apparatus from within the tree

For the Statement of Attainment or Transcript:

  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.
  • RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
  • Recognised Training Institution’s name to be displayed on document.
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Accepted Course Titles / Codes:
    • UETDRVC006
  • UETTDRVC21 (Completion date must be prior to 20/09/2022)
  • 12-month expiry
  • Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

 For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).
Electrical.Statement of Attainment.UETTDRVC23 - Plan for the removal of vegetation up to veg exclusion zone near live electrical appar
For the Statement of Attainment or Transcript:
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
  •  RTO Name, Code and Logo
  •  Name of Applicant
  • Units of competency code and name, date completed
  • Date certificate issued
  • Authorised person name or title (does not necessarily need a signature)
  • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
  • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
  • There is no expiry date on a Statement of Attainment or Transcript.
  • **RTO registration must only have been current at the time of training completion / awarding the document
  • Document verifier to ensure the Issue of this document is an RTO.

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

Record the Issue date within Onsite:
  • Completion date - if listed on certificate (this completion date is always used when displayed)
  • Issue date - If only an issue date is listed please enter this as the issue date

Electrical.Statement of Attainment.Assess vegetation in an electricity supply industry environment

For the Statement of Attainment or Transcript:

  •  Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.
  • RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
  • Recognised Training Institution’s name to be displayed on document.
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Accepted Course Titles / Codes:
    • UETDRVC002
    • UETTDRVC24
    • UETTDRVC24A
    • UETTDRVC04B
    • UETTDRVC04A
  • No expiry
  • Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

 For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Expiry date = none

Electrical.Statement of Attainment.Control vegetation in the vicinity of live electrical apparatus from an elevated work platform

For the Statement of Attainment or Transcript:
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
    • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
    • Documentation which has been found to be subject to alterations will not be accepted.
    • RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
    • Recognised Training Institution’s name to be displayed on document.
    • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
    • Completion date or issue date must be displayed
    • Accepted Course Titles / Codes:
      • UETDRVC004
    • UETTDRVC25 (Completion date must be prior to 20/09/2022)
    • 12-month expiry
    • Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

     For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Issue date - If only an issue date is listed, please enter this as the issue date

Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4-week expiry for this documentation).

Electrical.Statement of Attainment.Control vegetation in the vicinity of live electrical apparatus from ground level

For the Statement of Attainment or Transcript:
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
    • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
    • Documentation which has been found to be subject to alterations will not be accepted.
    • RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment.
    • Recognised Training Institution’s name to be displayed on document.
    • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
    • Completion date or issue date must be displayed
    • Accepted Course Titles / Codes:
      • UETDRVC005
    • UETTDRVC26
    • No expiry
    • Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

     For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Expiry date = none

Electrical.Statement of Attainment.Monitor vegetation control work in the vicinity of live electrical apparatus

For the Statement of Attainment or Transcript:
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
    • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
    • Documentation which has been found to be subject to alterations will not be accepted.
    • RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
    • Recognised Training Institution’s name to be displayed on document.
    • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
    • Completion date or issue date must be displayed
    • Accepted Course Titles / Codes:
      • UETDRVC009
      • UETTDRVC27
      • UETTDRVC27A
      • UETTDRVC07B
      • UETTDRVC07A
    • No expiry
    • Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

     For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Expiry date = none

Electrical.Statement of Attainment.UETTDRVC31 Operate specialised plant & equipment at ground level near live electrical apparatus 

For the Statement of Attainment or Transcript:
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
  •  RTO Name, Code and Logo
  •  Name of Applicant
  • Units of competency code and name, date completed
  • Date certificate issued
  • Authorised person name or title (does not necessarily need a signature)
  • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
  • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
  • There is no expiry date on a Statement of Attainment or Transcript.
  • **RTO registration must only have been current at the time of training completion / awarding the document
  • Document verifier to ensure the Issue of this document is an RTO.

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

Record the Issue date within Onsite:
  • Completion date - if listed on certificate (this completion date is always used when displayed)
  • Issue date - If only an issue date is listed please enter this as the issue date

Electrical.Statement of Attainment.Use specialised plant to cut vegetation above ground in the vicinity of live electrical apparatus

For the Statement of Attainment or Transcript:
  •  Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.
  • RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
  • Recognised Training Institution’s name to be displayed on document.
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Accepted Course Titles / Codes:
    • UETDRVC011
    • UETTDRVC32
    • UETTDRVC32A
  • No expiry
  • Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

 For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code


The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Expiry date = none

Electrical.Statement of Attainment.Perform rescue from within a tree in the vicinity of live electrical apparatus


        •  Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
        • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
        • Documentation which has been found to be subject to alterations will not be accepted.
        • RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
        • Recognised Training Institution’s name to be displayed on document.
        • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
        • Completion date or issue date must be displayed
        • Accepted Course Titles / Codes:
        • UETDRVC010
        • UETTDRVC34 (Completion date must be prior to 20/09/2022)
        • 12-month expiry
        • Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

     For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE
        : Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

  • The date of completion on the evidence should be recorded as the Issue Date in Pegasus

    Issue date - If only an issue date is listed, please enter this as the issue date

    Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4-week expiry for this documentation).

Electrical.Statement of Attainment. Control vegetation using pruning techniques

For the Statement of Attainment or Transcript:

  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.
  • RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
  • Recognised Training Institution’s name to be displayed on document.
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Accepted Course Titles / Codes:
    • UETDRVC007
    • UETTDRVC33
    • UETTDRVC33A
  • No expiry
  • Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

 For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Expiry date = none

Environmental.Statement of Attainment.AHCSAW201 - Conduct erosion and sediment control activities

For the Statement of Attainment or Transcript:
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
  •  RTO Name, Code and Logo
  •  Name of Applicant
  • Units of competency code and name, date completed
  • Date certificate issued
  • Authorised person name or title (does not necessarily need a signature)
  • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
  • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
  • There is no expiry date on a Statement of Attainment or Transcript.
  • **RTO registration must only have been current at the time of training completion / awarding the document
  • Document verifier to ensure the Issue of this document is an RTO.

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

Record the Issue date within Onsite:
  • Completion date - if listed on certificate (this completion date is always used when displayed)
  • Issue date - If only an issue date is listed please enter this as the issue date

Electrical. Certificate III. Certificate III in Electrotechnology Electrician
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.
  • RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
  • Recognised Training Institution’s name to be displayed on document.
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Accepted course code/s: 
    • UEE30820 - Certificate III in Electrotechnology Electrician
    • UEE30811 - Certificate III in Electrotechnology Electrician
    • UEE30807 - Certificate III in Electrotechnology Electrician
    • UTE31199 - Certificate III in Electrotechnology Systems Electrician
  • No expiry
  • Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Expiry date = none

Page Version: 182

Note: This Document is not version controlled when printed.
  • No labels