Competency | Competency Requirements | Upload Requirements | Examples |
---|---|---|---|
Electrical.Apprentice.Apprenticeship Training Contract as an Electrician from the Australian Apprenticeship Centre |
|
| |
Electrical.Authorised.Previously authorised with Category 1 – Disconnect and Reconnect as at the 30 December 2016 |
NOTE: Movement of Point of Attachment training is not required if combined with CAT 3 training in overhead service mains.
NOTE: An ASP Authorisation card showing class 2A and 2D is accepted in lieu of the above requirements providing it is still current and has been issued by an NSW distribution network operator (Ausgrid, Essential Energy or Endeavour Energy). |
| |
Electrical.Certificate III.UET30612 - Certificate III in ESI - Power Systems - Distribution Overhead (Linesman) |
|
| |
Electrical. Certificate III. UEE30811 - Certificate III in Electrotechnology Electrician |
|
| |
Electrical.Certificate III.UET30812 - Certificate III in ESI - Power Systems - Distribution Cable Jointing |
For overseas / international engineering qualifications to be accepted they need to either be recognised under the:
|
| |
Electrical.Induction.Ausgrid’s Electrical Safety Rules (ESRs) |
|
| |
Electrical.Qualified.Electrical Certificate or Licence | When Certificate is uploaded:
When Licence is uploaded:
When remittance or receipt (For new contractor Licence) has been uploaded:
| When certificate is uploaded:
When Licence is uploaded:
When remittance or receipt (For new contractor Licence) has been uploaded:
| |
Electrical.Licence.NSW | When Licence is uploaded:
When remittance or receipt (For new contractor Licence) has been uploaded:
| When Licence is uploaded:
When remittance or receipt (For new contractor Licence) has been uploaded:
| |
Electrical.Licence.Electrical Contractors Licence endorsed with a (Q) |
|
| |
Electrical.Licence.Electrical Supervisors Licence |
|
| |
Electrical.Statement of Attainment.UETTDRIS60A - Install and replace power system energy meters and associated equipment |
NOTE: Ausgrid will accept Cat 4 - Metering & Energising approved industry training for persons who have been authorised with Ausgrid prior to 31 December 2015. NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details. NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code |
| |
Electrical.Statement of Attainment.UETTDRCJ21A – Lay ESI cables |
NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code |
| |
Electrical.Statement of Attainment.UETTDRCJ22A – Install and maintain de-energised low voltage underground paper insulated cables |
NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code |
| |
Electrical.Statement of Attainment.UETTDRCJ23A – Install and maintain de-energised high voltage underground paper insulated cables |
NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code |
| |
Electrical.Statement of Attainment.UETTDRCJ26A – Install and maintain de-energised low voltage underground polymeric cables |
NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code |
| |
Electrical.Statement of Attainment.UETTDRCJ27A – Install and maintain de-energised high voltage underground polymeric cables |
NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code |
| |
Electrical.Statement of Attainment.UETTDREL14 - Working safely near live electrical apparatus as a non electrical worker | · Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. · If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. · Documentation which has been found to be subject to alterations will not be accepted. · Statement of Attainment showing the relevant unit of competency must be uploaded. · Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document. · Statement of Attainment must comply with ASQA Requirements per: · Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. · Is valid for 12 months from date of completion. · Must be current. · Australian Electricity Supply Industry (ESI) issued skills passport is accepted. · Uploaded document must include page of passport that shows ‘UETTDREL14A - Working safely near live electrical apparatus as a non-electrical worker’ as having been achieved with: o Ausgrid stamp being shown on this page o Date of Training o Trainer / Assessor Name & Signature
NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code |
| |
Electrical.Statement of Attainment.UETTDREL16 - Working safely near live electrical apparatus | · Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. · If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. · Documentation which has been found to be subject to alterations will not be accepted. · Statement of Attainment showing the relevant unit of competency must be uploaded. · Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document. · Statement of Attainment must comply with ASQA Requirements per: · Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. · Australian Electricity Supply Industry (ESI) issued skills passport is accepted. · Uploaded document must include page of passport that shows ‘UETTDREL16A - Working safely near live electrical apparatus’ as having been achieved with: o Ausgrid stamp being shown on this page o Date of Training o Trainer / Assessor Name & Signature
NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code |
| |
Electrical.Statement of Attainment.UETTDRIS55A – Install and maintain low voltage underground services | · Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. · If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. · Documentation which has been found to be subject to alterations will not be accepted. · Statement of Attainment showing the relevant unit of competency must be uploaded. · Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document. · Statement of Attainment must comply with ASQA Requirements per: · Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code |
| |
Electrical.Statement of Attainment.UETTDRIS56A – Install and maintain low voltage overhead services | · Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. · If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. · Documentation which has been found to be subject to alterations will not be accepted. · Statement of Attainment showing the relevant unit of competency must be uploaded. · Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document. · Statement of Attainment must comply with ASQA Requirements per: · Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.
NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code |
| |
Electrical.Statement of Attainment.UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work | · Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. · If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. · Documentation which has been found to be subject to alterations will not be accepted. · Statement of Attainment showing the relevant unit of competency must be uploaded. · Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document. · Statement of Attainment must comply with ASQA Requirements per: · Is valid for 12 months from date of completion. · Must be current. · Australian Electricity Supply Industry (ESI) issued skills passport is accepted. · Uploaded document must include page of passport that shows ‘UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work’ as having been achieved with: o Ausgrid stamp being shown on this page o Date of Training o Trainer / Assessor Name & Signature · Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid aligned version of ‘UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work’ has been completed.
NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details. NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code.
NOTE: All ASP1s - Ausgrid’s Electrical Safety Rules (ESRs) training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised.
NOTE: All ASP2s must complete their initial Ausgrid Electrical Safety Rules (ESR) training with Ausgrid’s Training Group. After the initial training the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned training. |
| |
Electrical.Statement of Attainment.UETTDRRF02 - Perform Pole Top Rescue | · Mandatory if an individual is required to conduct or observe work near overhead mains from a ladder or pole. · Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. · If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. · Documentation which has been found to be subject to alterations will not be accepted. · Statement of Attainment showing the relevant unit of competency must be uploaded. · Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document. · Statement of Attainment must comply with ASQA Requirements per: · Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. · Is valid for 12 months from date of completion. · Must be current. · Australian Electricity Supply Industry (ESI) issued skills passport is accepted. · Uploaded document must include page of passport that shows ‘UETTDRRF02B - Perform pole top rescue’ as having been achieved with: o Ausgrid stamp being shown on this page o Date of Training o Trainer / Assessor Name & Signature
NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details. NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code. |
| |
Electrical.Statement of Attainment.UETTDRRF03 - Perform EWP rescue |
· Mandatory if an individual is required to conduct or observe work near overhead mains from an EWP. · Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. · If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. · Documentation which has been found to be subject to alterations will not be accepted. · Statement of Attainment showing the relevant unit of competency must be uploaded. · Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document. · Statement of Attainment must comply with ASQA Requirements per: · Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. · Is valid for 12 months from date of completion. · Must be current. · Australian Electricity Supply Industry (ESI) issued skills passport is accepted. · Uploaded document must include page of passport that shows ‘UETTDRRF03B - Perform EWP rescue’ as having been achieved with: o Ausgrid stamp being shown on this page o Date of Training o Trainer / Assessor Name & Signature
NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code |
| |
Electrical.Statement of Attainment.UETTDRRF06 - Perform rescue from a live LV panel | · Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. · If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. · Documentation which has been found to be subject to alterations will not be accepted. · Statement of Attainment showing the relevant unit of competency must be uploaded. · Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document. · Statement of Attainment must comply with ASQA Requirements per: · Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. · Is valid for 12 months from date of completion. · Must be current. · Australian Electricity Supply Industry (ESI) issued skills passport is accepted. · Uploaded document must include page of passport that shows ‘UETTDRRF06B - Perform rescue from a live LV panel’ as having been achieved with: o Ausgrid stamp being shown on this page o Date of Training o Trainer / Assessor Name & Signature
NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code |
| |
Electrical.Statement of Attainment.UETTDRRF08 - Perform EWP controlled descent escape | · Mandatory if an individual is required to conduct work near overhead mains utilising an EWP. · If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. · Documentation which has been found to be subject to alterations will not be accepted. · Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. · Statement of Attainment showing the relevant unit of competency must be uploaded. · Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document. · Statement of Attainment must comply with ASQA Requirements per: · Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. · Is valid for 12 months from date of completion. · Must be current. · Australian Electricity Supply Industry (ESI) issued skills passport is accepted. · Uploaded document must include page of passport that shows ‘UETTDRRF08B - Perform EWP controlled descent escape’ as having been achieved with: o Ausgrid stamp being shown on this page o Date of Training o Trainer / Assessor Name & Signature
NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code | · Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4-week expiry for this documentation). | |
Electrical.Statement of Attainment.UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure | · Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. · If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. · Documentation which has been found to be subject to alterations will not be accepted. · Statement of Attainment showing the relevant unit of competency must be uploaded. · Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document. · Statement of Attainment must comply with ASQA Requirements per: · Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. · Is valid for 12 months from date of completion. · Must be current. · Australian Electricity Supply Industry (ESI) issued skills passport is accepted. · Uploaded document must include page of passport that shows ‘UETTDRRF09B - Apply access procedures to work on or near electrical network infrastructure’ as having been achieved with: o Ausgrid stamp being shown on this page o Date of Training o Trainer / Assessor Name & Signature
NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code |
| |
Electrical.Statement of Attainment.UETTDRRF10 - First Aid in an ESI Environment |
|
| |
Electrical.Statement of Attainment.UETTDRRF11A – Testing of Connections to LV Electricity Networks |
|
| |
Electrical.Qualified.UEENEEK142A Apply environmentally and sustainable procedures in the energy sector or Cat 4 - Metering & Energising |
|
|
Page Version: 17
Note: This Document is not version controlled when printed.