Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: RT #706721

Image RemovedImage Added


 UEENEEE101
Expand
titleStatement of Attainment


CompetencyCompetency RequirementsUpload RequirementsExamples

Anchor
RIIWHS201
RIIWHS201
OH&S-WHS.Statement of Attainment.RIIWHS201 - Work safely and follow WHS policies and work procedures


For the Statement of Attainment or Transcript: 

 Applicants
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  •  Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
  • RTO Name, Code and Logo
  • Name of Applicant
  • Units of competency code and name, date completed
  • Date certificate issued
  • Authorised person name or title (does not necessarily need a signature)
  • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
  • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
  • There is no expiry date on a Statement of Attainment or Transcript.
  • **RTO registration must only have been current at the time of training completion / awarding the document
  • Document verifier to ensure the Issue of this document is an RTO.
  • NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details
  • NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

For an RMS issued card:

  • The applicants name shown on the card needs to match the applicants registered name in Onsite
  • Must be issued by NSW Roads & Maritime Services (RMS)**

**From 1 July 2020, Traffic Control cards will no longer be issued by Transport for NSW (formerly RMS). They will be issued by SafeWork NSW and will be called a Traffic Control Work Training Card. RMS issued cards are still valid / can be accepted until the card expiry but following on from that contractors will supply Safework issued card.

  • Cards from RMS Accepted:
    • Containing "Traffic Controller” OR 'TCR' OR;
    • Containing "Implement Traffic Control Plan” OR 'IMP' OR;
    • Containing "Prepare Workzone Traffic Management” OR PWZ' OR
  • Either black and white or colour copies of certification is accepted
  • Only the front of the card needs to be displayed in uploaded file

For an interim RMS/ Safework issued certificate:

  • Interim Certificate can be accepted for this competency in lieu of card (Interim certificate is a Statement of completion)
  • The applicants name shown on the card needs to match the applicants registered name in Onsite
  • Statement of completion is valid exchange for Card, however only valid for 90 days
  • Matching competency title to be listed having been achieved on certificate
  • Certificate is to be issued by a Registered Training Organisation (RTO)
  • Either black and white or colour copies of certification is accepted

NOTE: If not issued by NSW Roads & Maritime Services (RMS)/ Safework it will need to be escalated to Site for approval.

  • Record the Issue date within Onsite as follows:
    • Completion date / Training Date - if listed on certificate (this date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date
  •  Expiry date is ONLY required for this competency in the instance where a temporary / Interim statement of attainment document is issued. Expiry should be calculated to occur on the date which is 4x weeks from the date of training completion

 

 

 

 

 

 

 

 

 

 











For an RMS/ Safework issued card:

  • The Issue date does not need to be recorded in Onsite
  • Expiry date to be entered as displayed on card
 


For an interim RMS/ Safework issued certificate:

 


  • Containing 'Traffic Controller' OR
  • Containing ' Implement Traffic Controller Plan' OR
  • Containing 'Prepare Workzone Traffic Management'
  • The issue date should be recorded as the date of completion / date of application
  • The expiry date must be recorded in Onsite - Expiry date is calculated to be 90 days from the date of completion / date of application
 

Anchor

UEENEEE101

Apply work health and safety regulations
Apply work health and safety regulations
OH&S-WHS.Statement of Attainment.

UEENEEE101 - Apply OHS

Apply work health and safety regulations, codes and practices in the workplace

 Applicants name to be shown on document
For the Statement of Attainment or Transcript:
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  •  Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
  • RTO Name, Code and Logo
  • Name of Applicant
  • Units of competency code and name, date completed
  • Date certificate issued
  • Authorised person name or title (does not necessarily need a signature)
  • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
  • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
  • There is no expiry date on a Statement of Attainment or Transcript.
  • **RTO registration must only have been current at the time of training completion / awarding the document
  • Document verifier to ensure the Issue of this document is an RTO
    •  
    • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
    • Documentation which has been found to be subject to alterations will not be accepted.
    • RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment.
    • Recognised Training Institution’s name to be displayed on document.
    • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
    • Completion date or issue date must be displayed
    • Accepted Course Titles / Codes:
        • UEECD0007
        • UEENEEE101A
        • UEENEEE001B
        • UEENEEE001A
    • No expiry
    • Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.
    • NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details
    • NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code
    Record
    • The date of completion on the evidence should be recorded as the Issue

    date within Onsite as follows:
    • Completion date / Training Date - if listed on certificate (this date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date
  •  Expiry date is ONLY required for this competency in the instance where a temporary / Interim statement of attainment document is issued. Expiry should be calculated to occur on the date which is 4x weeks from the date of training completion
  • Image Removed

     

    • Date in Pegasus


    • Expiry date = none

    Anchor
    conducthazardanalysis
    conducthazardanalysis
    OH&S-WHS.Statement of Attainment.MSMWHS201 - Conduct hazard analysis

    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
    • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
    • Documentation which has been found to be subject to alterations will not be accepted.

    Accepted units of Competency are:

    • MSMWHS201

    Accepted Forms of Evidence:

    1.      Statement of Attainment OR Transcript showing the relevant unit of competency

    • Recognised Prior Learned (RPL) units on transcript are acceptable
    • Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
    • Statement of Attainment must comply with ASQA Requirements per:

    https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements

    NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details.


    NOTE: USI Transcript with the relevant unit of competency listed is accepted


    2.      Australian Electricity Supply Industry (ESI) issued skills passport is accepted.

    • Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
    • Uploaded document must include page of passport that shows ‘Provide cardiopulmonary resuscitation’ as having been achieved with:
      • Ausgrid / Energy Australia stamp being shown on this page
      • Date of Training
      • Trainer / Assessor Name & Signature

    Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

    NOTE: If there is a signed sticker instead of a stamp with the trainers name with the relevant competency listed, it can be approved

    Issue Date = As per certificate

    Expiry Date = 2 years from issue date


    Anchor
    issueworkpermits
    issueworkpermits
    OH&S-WHS.Statement of Attainment.Issue work permits

    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
    • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
    • Documentation which has been found to be subject to alterations will not be accepted.

    Accepted units of Competency are:

    • MSMPER300
    • MSAPMPER300C
    • MSAPMPER300B

    Accepted Forms of Evidence:

    1.      Statement of Attainment OR Transcript showing the relevant unit of competency

    • Recognised Prior Learned (RPL) units on transcript are acceptable
    • Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
    • Statement of Attainment must comply with ASQA Requirements per:

    https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements

    NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details.


    NOTE: USI Transcript with the relevant unit of competency listed is accepted


    2.      Australian Electricity Supply Industry (ESI) issued skills passport is accepted.

    • Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
    • Uploaded document must include page of passport that shows ‘Provide cardiopulmonary resuscitation’ as having been achieved with:
      • Ausgrid / Energy Australia stamp being shown on this page
      • Date of Training
      • Trainer / Assessor Name & Signature

    Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

    NOTE: If there is a signed sticker instead of a stamp with the trainers name with the relevant competency listed, it can be approved

    Issue Date = As per certificate

    Expiry Date = 2 years from issue date