Page Comparison

Image RemovedImage Added

• Business Name and ABN needs to match. If it doesn't match, government certified evidence must be provided to link the ABN or business names together. This is ideally a  letter or download from ABR showing the linkage
• The minimum amount for Professional Indemnity Insurance is $10,000,000 AU
• If the policy amount is not in AUD a conversion at the time of processing is to completed to ensure the non AUD amount is greater then the 10,000,000 AUD amount
• Must be current
• Must state one of the accepted types as listed in the below table
• If the policy does not list one of the accepted types a Product Disclosure Statement (PDS) is required before escalation.
  
  • If PDS states on of the accepted types – the insurance and PDS needs to be uploaded together for approval
  • If the PDS does not specify Professional Indemnity it will be escalated

Self Insurance

• If the company indicates 'Self Insured' = Letter to be uploaded from the governing body which has approved the self insurance; 
  please click on the following link to see the current list of approved Self Insured companies in Australia:  http://www.srcc.gov.au/self_insurance/current_licensees.

• Issue Date = Start of coverage date listed on policy
• Expiry Date = Coverage end date listed on policy (If the policy is paid on a monthly 
  basis the expiry will be set when the next payment is due)
• Insurer = Insurer will be listed in policy content
• Policy Number = as specified on the policy
• Item = Professional Indemnity
• Amount Description = Same as item
• Amount = as specific on policy (must for a minimum of $10,000,000 AU)

Public Liability

Public and Products Liability

Broadform Liability

General Liability

Umbrella Liability

Business Liability

Legal Liability **

** If the type of insurance is Legal Liability, however the amount states Public and Products or Public or one of the accepted types of insurance we would approve.

If the type of insurance is Legal Liability and the amount only states Limit of Liability or Legal Liabilty then we would require site approval for this

Note: Insurance types can be listed in the limit section of the policy.

Eg. Under the Class or description it may refer to General Liability however under the limit or interest insured section if it refers specifically to an accepted type listed above this would be deemed acceptable.

Self Insurance

• If the company indicates 'Self Insured' = Letter to be uploaded from the governing body which has approved the self insurance; 
  please click on the following link to see the current list of approved Self Insured companies in Australia:  http://www.srcc.gov.au/self_insurance/current_licensees.

• Issue Date = Start of coverage date listed on policy
• Expiry Date = Coverage end date listed on policy (If the policy is paid on a monthly 
  basis the expiry will be set when the next payment is due)
• Insurer = Insurer will be listed in policy content
• Policy Number = as specified on the policy
• Item = Type of of coverage / policy (i.e. Public & Products Liability, Public Liability, Broadform Liability, General & Public Liability
• Amount Description = Same as item
• Amount = 

Image Removed

Pegasus staff CLICK HERE for additional information on this prior to verification of the file

Image Removed

Image Removed

• Issue Date =  The date the policy or letter was issued to the customer - NOT the 'start date'

• Enter the end as shown on the workers compensation document as the ‘End Date’ within Onsite.

Note: Normally the ‘start date’ and ‘end date’ can be recorded as the certificate validity from and to dates as shown below:

Image Removed

• Ensure the insurer listed on the workers compensation document is listed in the ‘Insurer’ field within Onsite. Usually this can be foundon the letterhead or in the footer eg. GIO, Allianz, CGU

• Enter the employer number / policy number shown in the document in the ‘Policy Number’ field within Onsite.

• Enter ACT Workers Compensation in the ‘Item’ field within Onsite

• Ensure the company / employer name shown on the workers compensation document matches the ‘Company’ field data within Onsite

• P/L / Pty LTD / Pty Limited can be accepted in any of these forms if also listed as the name in the system

• Aust / Australia can be accepted in any of these forms if also listed as the name in the system

• Ttee (means trust) this is acceptable as long as the rest of the name matches

• If document is addressed to a slightly different name however the Legal or Trading name is listed on the certificate of currency and matches this is acceptable

• If documented refers to ‘Self Insurance / Insurer’ please escalate. Do not return

• Ensure there is a ‘NSW Scheme Logo’ displayed on the document.

Image Removed

OR

Image Removed

OR

Image Removed

Note: For policies with icare shown you will need to ensure you also include the second page which is generally where it references NSW.

OR

• Verified doc must be Workers Compensation for NSW

Image Removed

Expand
title ACT
Anchor
act	act	Certification Requirements	Upload Requirements	Examples	ACT Workers Compensation	Ensure the company / employer name shown on the workers compensation document matches the ‘Company’ field data within Onsite P/L / Pty LTD / Pty Limited can be accepted in any of these forms if also listed as the name in the system Aust / Australia can be accepted in any of these forms if also listed as the name in the system Ttee (means trust) this is acceptable as long as the rest of the name matches If document is addressed to a slightly different name however the Legal or Trading name is listed on the certificate of currency and matches this is acceptable If documented refers to ‘Self Insurance / Insurer’ please escalate. Do not return Ensure the coverage references ‘ACT’ or ‘Australian Capital Territory’ as shown in the below examples Image Removed OR Image Removed OR Image Removed    Verified doc must be Workers Compensation for ACT
Expand
title NSW
Anchor
nsw	nsw
Expand
title National BR
Anchor
nsw	nsw
Certification	Certification Requirements	Upload Requirements	Examples
NSW Workers Compensation	Issue Date =  The date the policy or letter was issued to the customer - NOT the 'start date' Enter the end as shown on the workers compensation document as the ‘End Date’ within Onsite. Note: Normally the ‘start date’ and ‘end date’ can be recorded as the certificate validity from and to dates as shown below: Image Removed Ensure the insurer listed on the workers compensation document is listed in the ‘Insurer’ field within Onsite. Usually this can be found on the letterhead or in the footer eg. GIO, Allianz, CGU Enter the policy number shown in the document in the ‘Policy Number’ field within Onsite. Enter NSW Workers Compensation in the ‘Item’ field within Onsite	Image Removed Image Removed Image Removed
Expand
title NT
Anchor
nt	nt	Certification Requirements	Upload Requirements	Examples	NT Workers Compensation	Ensure the company / employer name shown on the workers compensation document matches the ‘Company’ field data within Onsite P/L / Pty LTD / Pty Limited can be accepted in any of these forms if also listed as the name in the system Aust / Australia can be accepted in any of these forms if also listed as the name in the system Ttee (means trust) this is acceptable as long as the rest of the name matches If document is addressed to a slightly different name however the Legal or Trading name is listed on the certificate of currency and matches this is acceptable If documented refers to ‘Self Insurance / Insurer’ please escalate. Do not return Ensure the coverage references ‘NT’ or ‘Northern Territory’ as shown in the below examples Image Removed OR Image Removed Verified doc must be Workers Compensation for NT	Issue Date =  The date the policy or letter was issued to the customer - NOT the 'start date' Enter the end as shown on the workers compensation document as the ‘End Date’ within Onsite. Note: Normally the ‘start date’ and ‘end date’ can be recorded as the certificate validity from and to dates as shown below: Image Removed Ensure the insurer listed on the workers compensation document is listed in the ‘Insurer’ field within Onsite. Usually this can be found on the letterhead or in the footer eg. GIO, Allianz, CGU Enter the employer number / policy number shown in the document in the ‘Policy Number’ field within includes the Nationally Recognised Training.Onsite. Enter NT Workers Compensation in the ‘Item’ field within Onsite
Expand
title QLD
Anchor
qld	qld	Certification Requirements	Upload Requirements	Examples
QLD Workers Compensation	Ensure the company / employer name shown on the workers compensation document matches the ‘Company’ field data within Onsite P/L / Pty LTD / Pty Limited can be accepted in any of these forms if also listed as the name in the system Aust / Australia can be accepted in any of these forms if also listed as the name in the system Ttee (means trust) this is acceptable as long as the rest of the name matches If document is addressed to a slightly different name however the Legal or Trading name is listed on the certificate of currency and matches this is acceptable If documented refers to ‘Self Insurance / Insurer’ please escalate. Do not return Ensure there is a ‘WorkCover Queensland Logo’ displayed on the document.   Image Removed  Verified doc must be Workers Compensation for QLD	Issue Date =  The date the policy or letter was issued to the customer - NOT the 'start date' Enter the end as shown on the workers compensation document as the ‘End Date’ within Onsite. Note: Normally the ‘start date’ and ‘end date’ can be recorded as the certificate validity from and to dates as shown below: Image Removed Enter WorkCover Queensland in the ‘Insurer’ field within Onsite. Enter the policy number shown in the document in the ‘Policy Number’ field within Onsite. Enter QLD Workers Compensation in the ‘Item’ field within Onsite	Image Removed
Expand
title SA
Certification Anchor sa sa Certification Requirements Upload Requirements Examples SA Workers Compensation Ensure the company / employer name shown on the workers compensation document matches the ‘Company’ field data within Onsite P/L / Pty LTD / Pty Limited can be accepted in any of these forms if also listed as the name in the system Aust / Australia can be accepted in any of these forms if also listed as the name in the system Ttee (means trust) this is acceptable as long as the rest of the name matches If document Insurance must be current NOTE: If the policy is paid on a monthly basis, the document must show when the recent payment was made or when the next payment is due Issue Date = Start of coverage date listed on policy Expiry Date = Coverage end date listed on policy (If the policy is paid on a monthly basis the expiry will be set when the next payment is due) Insurer = Insurer will be listed in policy content Policy Number = as specified on the policy Item = Type of of coverage Amount Description = Same as item Amount = as specified on policy NOTE: This will be sent to site for approval

Expand
title Workers Compensation
Expand title ACT Anchor act act Certification Certification Requirements Upload Requirements Examples ACT Workers Compensation Ensure the company / employer name shown on the workers compensation document matches the ‘Company’ field data within Onsite P/L / Pty LTD / Pty Limited can be accepted in any of these forms if also listed as the name in the system Aust / Australia can be accepted in any of these forms if also listed as the name in the system Ttee (means trust) this is acceptable as long as the rest of the name matches If document is addressed to a slightly different name however the Legal or Trading name is listed on the certificate of currency and matches this is acceptable If documented refers to ‘Self Insurance / Insurer’ please escalate. Do not return Ensure the coverage references ‘ACT’ or ‘Australian Capital Territory’ as shown in the below examples Image Added OR Image Added OR Image Added    Verified doc must be Workers Compensation for ACT   Enter the date of registration / commencement shown on the document as the ‘Start Date’ within Onsite. Enter the end as shown on the workers compensation document as the ‘End Date’ within Onsite. Note: Normally the ‘start date’ and ‘end date’ can be recorded as the certificate validity from and to dates as shown below: Image Added   Ensure the insurer listed on the workers compensation document is listed in the ‘Insurer’ field within Onsite. Usually this can be foundon the letterhead or in the footer eg. GIO, Allianz, CGU Enter the employer number / policy number shown in the document in the ‘Policy Number’ field within Onsite. Enter ACT Workers Compensation in the ‘Item’ field within Onsite Expand title NSW Anchor nsw nsw Expand title National BR Anchor nsw nsw Certification Certification Requirements Upload Requirements Examples NSW Workers Compensation Ensure the company / employer name shown on the workers compensation document matches the ‘Company’ field data within Onsite P/L / Pty LTD / Pty Limited can be accepted in any of these forms if also listed as the name in the system Aust / Australia can be accepted in any of these forms if also listed as the name in the system Ttee (means trust) this is acceptable as long as the rest of the name matches If document is addressed to a slightly different name however the Legal or Trading name is listed on the certificate of currency and matches this is acceptable If documented refers to ‘Self Insurance / Insurer’ please escalate. Do not return Ensure there is a ‘NSW Scheme Logo’ displayed on the document. Image Added OR Image Added OR Image Added Note: For policies with icare shown you will need to ensure you also include the second page which is generally where it references NSW.   OR Verified doc must be Workers Compensation for NSW Image Added Enter the date of registration / commencement shown on the document as the ‘Start Date’ within Onsite. Enter the end as shown on the workers compensation document as the ‘End Date’ within Onsite. Note: Normally the ‘start date’ and ‘end date’ can be recorded as the certificate validity from and to dates as shown below: Image Added Ensure the insurer listed on the workers compensation document is listed in the ‘Insurer’ field within Onsite. Usually this can be found on the letterhead or in the footer eg. GIO, Allianz, CGU Enter the policy number shown in the document in the ‘Policy Number’ field within Onsite. Enter NSW Workers Compensation in the ‘Item’ field within Onsite Image Added Image Added Image Added Expand title NT Anchor nt nt Certification Certification Requirements Upload Requirements Examples NT Workers Compensation Ensure the company / employer name shown on the workers compensation document matches the ‘Company’ field data within Onsite P/L / Pty LTD / Pty Limited can be accepted in any of these forms if also listed as the name in the system Aust / Australia can be accepted in any of these forms if also listed as the name in the system Ttee (means trust) this is acceptable as long as the rest of the name matches If document is addressed to a slightly different name however the Legal or Trading name is listed on the certificate of currency and matches this is acceptable If documented refers to ‘Self Insurance / Insurer’ please escalate. Do not return Ensure the coverage references ‘NT’ or ‘Northern Territory’ as shown in the below examples Image Added OR Image Added Verified doc must be Workers Compensation for NT Enter the date of registration / commencement shown on the document as the ‘Start Date’ within Onsite. Enter the end as shown on the workers compensation document as the ‘End Date’ within Onsite. Note: Normally the ‘start date’ and ‘end date’ can be recorded as the certificate validity from and to dates as shown below: Image Added Ensure the insurer listed on the workers compensation document is listed in the ‘Insurer’ field within Onsite. Usually this can be found on the letterhead or in the footer eg. GIO, Allianz, CGU Enter the employer number / policy number shown in the document in the ‘Policy Number’ field within includes the Nationally Recognised Training.Onsite. Enter NT Workers Compensation in the ‘Item’ field within Onsite   Expand title QLD Anchor qld qld Certification Certification Requirements Upload Requirements Examples QLD Workers Compensation Ensure the company / employer name shown on the workers compensation document matches the ‘Company’ field data within Onsite P/L / Pty LTD / Pty Limited can be accepted in any of these forms if also listed as the name in the system Aust / Australia can be accepted in any of these forms if also listed as the name in the system Ttee (means trust) this is acceptable as long as the rest of the name matches If document is addressed to a slightly different name however the Legal or Trading name is listed on the certificate of currency and matches this is acceptable If documented refers to ‘Self Insurance / Insurer’ please escalate. Do not return Ensure there is a ‘Government of South Australia’ Logo ‘WorkCover Queensland Logo’ displayed on the document. Image Removed   Image Added  Verified doc must be Workers Compensation for SA Note for SA Workers Compensation: For SA workers compensation document uploads you may note there is no end date recorded on the document. If this is the case, enter the last day of the finanical year as the end date for this cert – The last day of the financial year every year falls on the 30th June. E.g: If you receive an SA Workers Compensation document upload that shows ‘This employer is registered from 06/08/2004, the next upcoming ‘last day of the financial year’ is 30/06/2016 which can be entered as the end date despite not being shown on the document. Issue Date =  The date the policy or letter was issued to the customer - NOT the 'start date'. Enter the end as QLD Enter the date of registration / commencement shown on the document as the ‘Start Date’ within Onsite. Enter the end as shown on the workers compensation document as the ‘End Date’ within Onsite. Note: Normally the ‘start date’ and ‘end date’ can be recorded as the certificate validity from and to dates as shown below: Image Added Enter WorkCover Queensland in the ‘Insurer’ field within Onsite. Enter the policy number shown in the document in the ‘Policy Number’ field within Onsite. Enter QLD Workers Compensation in the ‘Item’ field within Onsite Image Added Expand title SA Anchor sa sa Certification Certification Requirements Upload Requirements Examples SA Workers Compensation Ensure the company / employer name shown on the workers compensation document as the ‘End Date’ matches the ‘Company’ field data within Onsite . Note: Normally the ‘start date’ and ‘end date’ can be recorded as the certificate validity from and to dates as shown below: Image Removed Enter Return to Work SA in the ‘Insurer’ field within Onsite. Enter the employer number listed on the workers compensation document is listed in the ‘Policy Number’ field within Onsite Enter SA Workers Compensation in the ‘Item’ field within Onsite
Expand
title TAS
Anchor
tas	tas	Certification Requirements	Upload Requirements	Examples	TAS Workers Compensation	Ensure the company / employer name shown on the workers compensation document matches the ‘Company’ field data within Onsite P/L / Pty LTD / Pty Limited can be accepted in any of these forms if also listed as the name in the system Aust / Australia can be accepted in any of these forms if also listed as the name in the system Ttee (means trust) this is acceptable as long as the rest of the name matches If document is addressed to a slightly different name however the Legal or Trading name is listed on the certificate of currency and matches this is acceptable If documented refers to ‘Self Insurance / Insurer’ please escalate. Do not return Ensure the coverage references ‘TAS’ or ‘Tasmania’ as shown in the below examples Image Removed OR Image Removed OR Image Removed Verified doc must be Workers Compensation for TAS

Image Removed

Image Removed

Ensure there is a ‘Worksafe Victoria’ logo or ‘Authorised Agent of the Victorian WorkCover Authority’ displayed on the document.
Image Removed

OR

Image Removed

• Verified doc must be Workers Compensation for VIC

• Issue Date =  The date the policy or letter was issued to the customer - NOT the 'start date'

• Enter the end as shown on the workers compensation document as the ‘End Date’ within Onsite.

Note: Normally the ‘start date’ and ‘end date’ can be recorded as the certificate validity from and to dates as shown below:

Image Removed

in the system Aust / Australia can be accepted in any of these forms if also listed as the name in the system Ttee (means trust) this is acceptable as long as the rest of the name matches If document is addressed to a slightly different name however the Legal or Trading name is listed on the certificate of currency and matches this is acceptable If documented refers to ‘Self Insurance / Insurer’ please escalate. Do not return Ensure the coverage references ‘TAS’ or ‘Tasmania’ as shown in the below examples Image Added OR Image Added OR Image Added Verified doc must be Workers Compensation for TAS Enter the date of registration / commencement shown on the document as the ‘Start Date’ within Onsite. Enter the end as shown on the workers compensation document as the ‘End Date’ within Onsite. Note: Normally the ‘start date’ and ‘end date’ can be recorded as the certificate validity from and to dates as shown below: Image Added Ensure the insurer listed on the workers compensation document is listed in the ‘Insurer’ field within Onsite. Usually this can be foundon the letterhead or in the footer eg. GIO, Allianz, CGU Enter the employer number / policy number shown in the document in the ‘Policy Number’ field within Onsite. Enter TAS Workers Compensation in the ‘Item’ field within Onsite Image Added