Page Comparison

• Name on certificate or card to match person registered (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
• Accepted Documents:
• Statement of Attainment
• Certificate of Attendance
• Welders Card
• Competency unit/qualification code must match exactly
• Must be Issued by an RTO with Nationally Recognised Training logo
• Black and white or colour is acceptable
• Scanned document to be clearly legible

Note: If a card is supplied there must be a copy of the front and back displaying the units of competency, person's name, issue date as above and must be issued by an RTO.

• Issue Date to be entered as date of training completion
• Expiry date not required

Welder.Certificate.PMBWELD301 Butt Weld Polyethylene Plastic Pipelines

Welder.Certificate.PMBWELD302 Electro Fusion Weld Polyethylene Plastic Pipelines 

• Name on certificate or card to match person registered (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
• Accepted Documents:
• Verification of Competence
• Welders Card
• Competency unit/qualification code must match exactly
• Must be Issued by an RTO with Nationally Recognised Training logo
• Black and white or colour is acceptable
• Scanned document to be clearly legible

Note: If a card is supplied there must be a copy of the front and back displaying the units of competency, person's name, issue date as above and must be issued by an RTO.

• Issue Date to be entered as date of training completion
• Expiry date not required

Welder.Certificate II.Polymer Processing (or equivalent)

• Name on certificate or card to match person registered (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
• Accepted Documents:
• Certificate II showing the Polymer Processing or Polyweld qualification
• Welders Card
• Competency unit/qualification code must match exactly
• Must be Issued by an RTO with Nationally Recognised Training logo
• Black and white or colour is acceptable
• Scanned document to be clearly legible

Note: If a card is supplied there must be a copy of the front and back displaying the units of competency, person's name, issue date as above and must be issued by an RTO.

• Issue Date to be entered as date of training completion
• Expiry date not required

• Name on certificate or card to match person registered (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
• Accepted Documents:
• Certificate III showing the Polymer Processing or Polyweld qualification
• Welders Card
• Competency unit/qualification code must match exactly
• Must be Issued by an RTO with Nationally Recognised Training logo
• Black and white or colour is acceptable
• Scanned document to be clearly legible

Note: If a card is supplied there must be a copy of the front and back displaying the units of competency, person's name, issue date as above and must be issued by an RTO.

• Issue Date to be entered as date of training completion
• Expiry date not required

• The worker’s name shown on the document should match the worker’s registered name in Onsite. First name initial and surname is acceptable
• A weld test report must be submitted
• The document will need to mention either Certificate Welding AS/NZS 1554.1 or AS/NZS 2980 or ISO 9606
• Must have a C for competent