Company.Induction.Ausgrid Accredited Service Provider LVL2 Authorisation
Ausgrid Certificate of Completion is accepted. It must show: Ausgrid Authorisation Contractors Name Date of completion
Ausgrid Card is accepted. It must show: Ausgrid Authorisation Level Class Authorised Contractors Name Expiry Date Company AUP # (back side of the card)
Record the Issue date within Onsite:
Completion date - if listed on certificate (this completion date is always used when displayed)
Issue date - If only an issue date is listed please enter this as the issue date
Expiry date - as stated on the card
Company.Induction.Ausgrid Accredited Service Provider LVL1 Authorisation
Ausgrid Certificate of Completion is accepted. It must show: Ausgrid Authorisation Contractors Name Date of completion
Ausgrid Card is accepted. It must show: Ausgrid Authorisation Level Class Authorised Contractors Name Expiry Date Company AUP # (back side of the card)
Record the Issue date within Onsite:
Completion date - if listed on certificate (this completion date is always used when displayed)
Issue date - If only an issue date is listed please enter this as the issue date
Expiry date - as stated on the card
Expand
title
Statement of Attainment
Anchor
electricalsoa
electricalsoa
Competency
Competency Requirements
Upload Requirements
Example Documents
Electrical.Statement of Attainment.UETTDRRF09B - Apply access procedures to work on or near
The applicants name shown on this statement of attainment needs to match the applicants registered name in Onsite
The matching competency code needs to be shown
Statement of Attainment must be issued by a registered training organisation (RTO)
No expiry date is required for this competency upload.
The Issue date in Onsite should be recorded as the date of completion shown on the statement of attainment
Electrical.Statement of Attainment.ICTCBL2136B - Install, maintain and modify customer premises
The applicants name shown on this statement of attainment needs to match the applicants registered name in Onsite
The matching competency code needs to be shown
Statement of Attainment must be issued by a registered training organisation (RTO)
No expiry date is required for this competency upload.
The Issue date in Onsite should be recorded as the date of completion shown on the statement of attainment
Electrical.Statement of Attainment.ICTOHS2153B - Work Safely Near Power Infrastructure
The applicants name shown on this statement of attainment needs to match the applicants registered name in Onsite
The matching competency code needs to be shown
Statement of Attainment must be issued by a registered training organisation (RTO)
No expiry date is required for this competency upload.
The Issue date in Onsite should be recorded as the date of completion shown on the statement of attainment
Electrical.Statement of Attainment.Electrical Equipment in Hazardous Areas
Name on certificate to match the person registered
Statement of Attainment in Electrical Equipment in Hazardous Areas to be listed
Issued by an RTO / Nationally Recognised Training logo
No expiry
Black and white or colour is acceptable
The Issue date in Onsite should be recorded as the date of completion shown on the statement of attainment
The applicants name shown on this statement of attainment needs to match the applicants registered name in Onsite
Must be delivered by TasNetworks
Must display Level 1 & 2 or Level 1 & 2 Refresher
Expiry and issue date recorded as per the certificate
Anchor
meterinstall
meterinstall
Electrical. Statement of Attainment.Power System Meter Install
Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
RTO Name, Code and Logo
Name of Applicant
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
There is no expiry date on a Statement of Attainment or Transcript. **RTO registration must only have been current at the time of training completion / awarding the document
Document verifier to ensure the Issue of this document is an RTO.
DOCUMENT MUST STATE EITHER
Power System Meter Install
Metering Cat4-21249
NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details
NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code
Electrical.Certificate III.UET30812 - Certificate III in ESI - Power Systems - Distribution Cable Jointing
Applicants name to be shown on documentation Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted) RTO Name, National Provider Code / RTO Number & Logo to be displayed on document Completion date or issue date must be displayed Course code to be listed on certificate to match the nominated coding and title within Onsite Name and / or signature of issuer Document / Certificate / Number No expiry
Record the Issue date within Onsite:
Completion date - if listed on certificate (this completion date is always used when displayed)
Issue date - If only an issue date is listed please enter this as the issue date
Electrical.Certificate III.UET30612 - Certificate III in ESI - Power Systems - Distribution Overhead (Linesman)
Applicants name to be shown on documentation Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted) RTO Name, National Provider Code / RTO Number & Logo to be displayed on document Completion date or issue date must be displayed Course code to be listed on certificate to match the nominated coding and title within Onsite Name and / or signature of issuer Document / Certificate / Number No expiry
Record the Issue date within Onsite:
Completion date - if listed on certificate (this completion date is always used when displayed)
Issue date - If only an issue date is listed please enter this as the issue date