Competency | Competency Requirements | Upload Requirements | Examples |
---|
High Risk Work.Unit Standard.17309 - Operate a wheeled loader on infrastructure works sites | The required evidence will be aeither: - NZQA Record of Achievement showing completion of the
following - unit standard
:US17309 - Operate a wheeled loader on infrastructure works sites- which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard.1737 - Drive a heavy vehicle on unsealed road surfaces | The required evidence will be aeither: - NZQA Record of Achievement showing completion of the
following - unit standard
:US1737 - Drive a heavy vehicle on unsealed road surfaces- which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard.1738 - Drive a heavy vehicle in an off-road environment | The required evidence will be a: NZQA Record of Achievement showing completion of the following unit standard:US1738 - Drive a heavy vehicle in an off-road environmentrequired evidence will be either: - NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard.17599 - Plan a confined space entry | The required evidence will be a: NZQA Record of Achievement showing completion of the following unit standard:US17599 - Plan a confined space entrybe either: - NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard.17976 - DKO operating a light 4WD vehicle in an off-road environment | The required evidence will be aeither: - NZQA Record of Achievement showing completion of
the following unit standard:US17976 - DKO operating a light 4WD vehicle in an off-road environment- the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard.17978 - Operate a light 4WD vehicle in an off-road environment | The required evidence will be aeither: - NZQA Record of Achievement showing completion of the
following - unit standard
:US17978 - Operate a light 4WD vehicle in an off-road environment- which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard.18037 - Plan a confined space entry in the electricity supply industry | The required evidence will be aeither: - NZQA Record of Achievement showing completion of the
following - unit standard
:US18037 - Plan a confined space entry in the electricity supply industry- which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard.18272 - Operate a mobile elevating work platform (MEWP) in the ESI | The required evidence will be a: NZQA Record of Achievement showing completion of the following unit standard:US18272 - Operate a mobile elevating work platform (MEWP) in the ESIevidence will be either: - NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard.18426 - DKO hazards associated with confined spaces | The required evidence will be aeither: - NZQA Record
of Achievement showing completion of the following unit standard:US18426 - DKO hazards associated with confined spaces- of Achievement showing completion of the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard.19207 - Work in a confined space in the infrastructure industry | The required evidence will be aeither: - NZQA Record of Achievement showing completion of
the following unit standard:US19207 - Work in a confined space in the infrastructure industry- the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard.20875 - DKO slinging, lifting, moving, and placing loads using mobile plant | The required evidence will be aeither: - NZQA Record of Achievement showing completion of
the following unit standard:US20875 - DKO slinging, lifting, moving, and placing loads using mobile plant- the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard.22279 - Operate a skid steer on infrastructure works sites | The required evidence will be aeither: - NZQA Record of Achievement showing completion of the
following - unit standard
:US22279 - Operate a skid steer on infrastructure works sites- which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard.23232 - Develop a rescue plan for recovery of a suspended individual after a fall | The required evidence will be a: NZQA Record of Achievement showing completion of the following unit standard:23232 - Develop a rescue plan for recovery of a suspended individual after a fallevidence will be either: - NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard.23960 - Assess the worksite, prepare and operate a scissor lift elevating work platform (EWP) | The required evidence will be a: NZQA Record of Achievement showing completion of the following unit standard:US23960 - Assess the worksite, prepare and operate a scissor lift elevating work platform (EWP)will be either: - NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard.23961 - Assess the worksite, prepare and operate a truck-mounted elevating work platform (EWP) | The required evidence will be a: NZQA Record of Achievement showing completion of the following unit standard:US23961 - Assess the worksite, prepare and operate a truck-mounted elevating work platform (EWP)will be either: - NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard.23962 - Self-propelled Boom Lift Elevating Work Platform (EWP) | The required evidence will be a: NZQA Record of Achievement showing completion of the following unit standard:US23962 - Self-propelled Boom Lift Elevating Work Platform (EWP)required evidence will be either: - NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard.23963 - Assess the worksite, prepare and operate a trailer-mounted elevating work platform (EWP) | The required evidence will be a: NZQA Record of Achievement showing completion of the following unit standard:US23963 - Assess the worksite, prepare and operate a trailer-mounted elevating work platform (EWP)will be either: - NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard.23964 - Assess the worksite, prepare and operate a vertical lift elevating work platform (EWP) | The required evidence will be a: NZQA Record of Achievement showing completion of the following unit standard:US23964 - Assess the worksite, prepare and operate a vertical lift elevating work platform (EWP)will be either: - NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard.23966 - Describe types of elevating work platforms (EWPs) and legislative requirements for their use | The required evidence will be a: NZQA Record of Achievement showing completion of the following unit standard:US23966 - Describe types of elevating work platforms (EWPs) and legislative requirements for their usewill be either: - NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard.24553 - Operate a light utility vehicle (LUV) on flat terrain in the workplace under close supervision | The required evidence will be a: NZQA Record of Achievement showing completion of the following unit standard:US24553 - Operate a light utility vehicle (LUV) on flat terrain in the workplace under close supervisionwill be either: - NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard.24556 - DKO the safe operation of a light utility vehicle (LUV) | The required evidence will be a: NZQA Record of Achievement showing completion of the following unit standard:US24556 - DKO the safe operation of a light utility vehicle (LUV)required evidence will be either: - NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard.24558 - Operate a light utility vehicle (LUV) on rolling terrain under limited supervision | The required evidence will be a: NZQA Record of Achievement showing completion of the following unit standard:US24558 - Operate a light utility vehicle (LUV) on rolling terrain under limited supervisionwill be either: - NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard.24562 - Operate a light utility vehicle (LUV) with mounted equipment or a load under limited supervision | The required evidence will be a: NZQA Record of Achievement showing completion of the following unit standard:US24562 - Operate a light utility vehicle (LUV) with mounted equipment or a load under limited supervisionwill be either: - NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard.25510 - Operate an atmospheric testing device to determine a suitable atmosphere exists to work safe | The required evidence will be a: NZQA Record of Achievement showing completion of the following unit standard:US25510 - Operate an atmospheric testing device to determine a suitable atmosphere exists to work safewill be either: - NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard.30072 - Demonstrate and apply knowledge of slinging regular loads safely | The required evidence will be aeither: - NZQA Record of
Achievement showing completion of the following unit standard:US30072 - Demonstrate and apply knowledge of slinging regular loads safel- Achievement showing completion of the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard.31953 & 31955 - Operate light lifting and rigging equipment & Demonstrate knowledge of light lifting | The required evidence will be aeither: - NZQA Record of Achievement showing completion of
the following unit standard:US31953 & 31955 - Operate light lifting and rigging equipment & Demonstrate knowledge of light lifting- both unit standards which are listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standards which are listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard.3789 - Sling varied regular loads and safely direct a crane during crane operations | The required evidence will be aeither: - NZQA Record of Achievement showing completion of the
following - unit standard
:US3789 - Sling varied regular loads and safely direct a crane during crane operations- which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard.6916 - DKO the rules relating to chainsaw use | The required evidence will be aeither: - NZQA Record of Achievement showing completion of the
following - unit standard
:US6916 - DKO the rules relating to chainsaw use- which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard.6917 - Demonstrate basic chainsaw operation | The required evidence will be a: NZQA Record of Achievement showing completion of the following unit standard:US6917 - Demonstrate basic chainsaw operationevidence will be either: - NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard.15757 - Use, install & disestablish temporary proprietary height safety systems | The required evidence will be aeither: - NZQA Record of Achievement showing completion of
the following unit standard:US15757 - Use, install & disestablish temporary proprietary height safety systems- the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard.23229 - Use safety harness system when working at height | The required evidence will be aeither: - NZQA Record of Achievement showing completion of
the following unit standard:US23229 - Use safety harness system when working at height- the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Qualified.Previously hold crane operation unit standard | The required evidence will be aeither: - NZQA Record of Achievement showing completion of the
following - unit standard
:- 16617 - Use a truck loader crane to lift & place regular loads
Date achieved MUST be Prior to 2010 - which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible - Date achieved MUST be Prior to 2010
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
|
Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard.21467 - Store and handle workplace chemicals | The required evidence will be aeither: - NZQA Record of Achievement showing completion of
the following unit standard:US21467 - Store and handle workplace chemicals- the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard.20733 - Knowledge of safe storage and handling of hazardous substances in the workplace | The required evidence will be a: NZQA Record of Achievement showing completion of the following unit standard:US20733 - Knowledge of safe storage and handling of hazardous substances in the workplaceeither: - NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard.24559 - Operate a quad bike on rolling terrain
| The required evidence will be aeither: - NZQA Record of Achievement showing completion of
the following unit standard:US24559 - Operate a quad bike on rolling terrain- the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard.24560 - Operate a Light Utility Vehicle (LUV) with trailed equipment
| The required evidence will be aeither: - NZQA Record of Achievement showing completion of the
following - unit standard
:US 24560 - Operate a Light Utility Vehicle (LUV) with trailed equipment- which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard.24561 - Operate a quad bike with trailed equipment
| The required evidence will be aeither: - NZQA Record of Achievement showing completion of the
following - unit standard
:US24561 - Operate a quad bike with trailed equipment- which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard.31290 - Knowledge of safe management and potential adverse effects of hazardous substances | The required evidence will be a: NZQA Record of Achievement showing completion of the following unit standard:US 31290 - Knowledge of safe management and potential adverse effects of hazardous substancesrequired evidence will be either: - NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard.31293 - Safe handling, storage, and disposal of hazardous substances in the workplace | The required evidence will be a: NZQA Record of Achievement showing completion of the following unit standard:US31293 - Safe handling, storage, and disposal of hazardous substances in the workplacerequired evidence will be either: - NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard.3800 - Use a radio remote or pendant controlled gantry crane to lift and place regular loads | The required evidence will be a: NZQA Record of Achievement showing completion of the following unit standard:US3800 - Use a radio remote or pendant controlled gantry crane to lift and place regular loadsevidence will be either: - NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
Crane Vehicle Loader.Unit Standard.16617 - Use a truck loader crane to lift & place regular loadsThe required evidence will be a: NZQA Record of Achievement showing completion of the following unit standard:US16617 - Use a truck loader crane to lift & place regular loads | The required evidence will be either: - NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
NZQA Record of Achievement showing completion of the following unit standard:US10851 - Operate a powered industrial lift truck (forklift)Heavy Vehicle.Unit Standard.10851 - Operate a powered industrial lift truck (forklift) The required evidence will be a: | The required evidence will be either: - NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
Heavy Vehicle.Unit Standard.16701 - Demonstrate knowledge and skills for driving on a road for endorsement W (wheels) | The required evidence will be a: NZQA Record of Achievement showing completion of the following unit standard:US16701 - Demonstrate knowledge and skills for driving on a road for endorsement W (wheels)evidence will be either: - NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
Heavy Vehicle.Unit Standard.16702 -Demonstrate knowledge and skills for driving on a road for endorsement R (rollers) | The required evidence will be a: NZQA Record of Achievement showing completion of the following unit standard:US16702 -Demonstrate knowledge and skills for driving on a road for endorsement R (rollers)evidence will be either: - NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
Heavy Vehicle.Unit Standard.16703 - Demonstrate knowledge and skills for driving on a road for endorsement T (tracks) | The required evidence will be a: NZQA Record of Achievement showing completion of the following unit standard:US16703 - Demonstrate knowledge and skills for driving on a road for endorsement T (tracks)evidence will be either: - NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
Heavy Vehicle.Unit Standard.17574 - Operate a rigid vehicle to meet the requirements for a full class 2 driver licence | The required evidence will be a: NZQA Record of Achievement showing completion of the following unit standard:US17574 - Operate a rigid vehicle to meet the requirements for a full class 2 driver licencewill be either: - NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
Heavy Vehicle.Unit Standard.18496 - Demonstrate knowledge and skills for driving a forklift on a road for endorsement F (forklift) | The required evidence will be a: NZQA Record of Achievement showing completion of the following unit standard:US18496 - Demonstrate knowledge and skills for driving a forklift on a road for endorsement F (forklift)will be either: - NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard.24554 - Operate a quad bike on flat terrain | The required evidence will be a: NZQA Record of Achievement showing completion of the following unit standard:US24554 - Operate a quad bike on flat terrainwill be either: - NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard.24557 - DKO the safe operation of a quad bike | The required evidence will be aeither: - NZQA Record of Achievement showing completion of the following unit standard:US24557 - DKO the safe operation of a quad bikeof the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard.24563 - Operate a quad bike with mounted equipment or load | The required evidence will be aeither: - NZQA Record of Achievement showing completion of the following unit standard :US24563 - Operate a quad bike with mounted equipment or loadwhich is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Credit Result date
Expiry Date = Not Required |
|