Page Comparison

Electrical.Awareness.Assured Equipment GroundingThe training documentation uploaded should be dated within the past 12 months

OSHA Reference: General Industry 1910.269 (o)(2)(ii) Employees shall be trained in safe work practices upon their initial assignment to the test area, with periodic reviews and updates provided as required by paragraph (a)(2) of this section (1910.269(a)(2).

OSHA Reference: Construction 1926.1408 (G)(1)(v) The procedures to be followed to properly ground equipment and the limitations of grounding. (3) Training under this section must be administered in accordance with 1926.1430(g).

Acceptable training documentation should include the following:
Subject/Topic of the Training
Instructor Name
Employee Name
Employee Signature
Date

Training documentation can be in the form of a:
Certificate
Safety Meeting/Toolbox Talk
Refresher Training

Issue Date = Date of Completion

Expiry Date= 12 months from date of completion

Electrical.Awareness.Electrical Awareness (Unqualified)

OSHA Reference: General Industry 29 CFR 1910.332

The training documentation uploaded should dated be within the past 12 months.
Acceptable training documentation should include the following:
Subject/Topic of the Training
Instructor Name
Employee Name
Employee Signature
Date

Training documentation can be in the form of a:
Certificate
Safety Meeting/Toolbox Talk
Refresher Training

Issue Date = Date of Completion

Expiry Date= 12 months from date of completion

Electrical.Qualified.Electrical Safety (Qualified)

OSHA Reference: General Industry 29 CFR 1910.332
NFPA 70E 110.2(D) and 130.2(D)(3)

The training documentation uploaded should be within the past year unless valid Trade licenses and/or refresher training can be provided as proof of qualification maintenance

Acceptable training documentation should include the following:
Subject/Topic of the Training
Instructor Name
Employee Name
Employee Signature
Date

Training documentation can be in the form of a:
Certificate such as NFPA 70E
Trade License would satisfy this
OJT documentation
Classroom Training

Signals.Qualified.Qualified Signal Person

OSHA Reference: Construction 29 CFR 1926.1428
The documentation must specify each type of signaling (e.g. hand signals, radio signals, etc.) for which the signal person meets the requirements of paragraph (c) of this section
The training documentation uploaded should be dated within the past 12 months*.

Acceptable training documentation should include the following:
Subject/Topic of the Training
Instructor Name
Employee Name
Employee Signature
Date

Training documentation can be in the form of a:
Certificate or other validating documentation (Must specify details from paragraph (a)(3) and (c)(1) through (4) of 29 CFR 1926.1428)
Practical Test or Written confirmation that signal person has been evaluated and meets the requirements in paragraphs (c)(1) through (4) of 29 CFR 1926.1428

Issue Date = Date of Completion

Expiry Date= 12 months from date of completion