Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 25
Next »
x
Medicals
Competency | Competency Requirements | Upload Requirements | Examples |
---|
Drug and Alcohol Testing.Course.10275NAT- Course in Workplace Drug Testing(breath alcohol)(oral fluid-saliva)(urine) | - Name on test results to match the person registered (However shortened first names such as 'Chris' for 'Christopher' are accepted)
- The uploaded document must display course code: 10275NAT
- The uploaded document must be a statement of attainment issued by an RTO
- Nationally accredited logo must be displayed
- RTO number must be referenced
- Certificate number must be referenced
- Black and white OR Colour copies of document are accepted
| - Issue date to be recorded
- No expiry date required
|
|
Drug and Alcohol Testing.Statement of Attainment.DATBRE002 - Perform breath alcohol testing | - Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- Name of Applicant
- Units of competency code and name, date completed
- Date certificate issued
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
- **RTO registration must only have been current at the time of training completion / awarding the document
| - Issue date - Completion date / Training Date - if listed on certificate (this date is always used when displayed)
- No Expiry
|
|
Drug and Alcohol Testing.Certificate.• DATKNO002 – Apply underpinning knowledge required for drug and alcohol testing | - Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- Name of Applicant
- Units of competency code and name, date completed
- Date certificate issued
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
- **RTO registration must only have been current at the time of training completion / awarding the document
| - Issue date - Completion date / Training Date - if listed on certificate (this date is always used when displayed)
- No Expiry
|
|
Drug and Alcohol Testing.Statement of Attainment.DATORA002 - Perform oral fluid drug testing | - Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- Name of Applicant
- Units of competency code and name, date completed
- Date certificate issued
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
- **RTO registration must only have been current at the time of training completion / awarding the document
| - Issue date - Completion date / Training Date - if listed on certificate (this date is always used when displayed)
- No Expiry
|
|
Drug Testing.Certificate.DATURI002 – Perform urine drug testing | - Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- Name of Applicant
- Units of competency code and name, date completed
- Date certificate issued
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
- **RTO registration must only have been current at the time of training completion / awarding the document
| - Issue date - Completion date / Training Date - if listed on certificate (this date is always used when displayed)
- No Expiry
|
|
Medical.Certificate.Health Surveillance – Noise | - Audiometric testing results from a registered medical provider
- Name on test results to match the person registered (However shortened first names such as 'Chris' for 'Christopher' are accepted)
| - Issue date to be recorded
- Expiry = 2 years from Issue Date
| |
Company.Awareness.D&A Workplace Impairment | - Copy of Building Trade Group drug & alcohol program card.
- Training register from a third party training provider identifying employee or another third-party organisations Workplace Impairment or Drug and Alcohol Awareness training certificate.
- Letter or email confirmation from a third party organisation confirming workplace impairment or Drug and Alcohol Awareness training.
- Must specify Drug & Alcohol Awareness training or “Workplace Impairment training” on the documentation
- First and Last name of worker must match
- Black and white copies accepted
| - Issue date to be recorded
- If no issue date, then date of letter received, or date of training is accepted.
- No expiry date required
|
|
Tunnel.Qualified.WCX3A Tunnel Worker - P2 RPE Fit Test Record | - Name on test results to match the person registered (However shortened first names such as 'Chris' for 'Christopher' are accepted)
- Overall Fitness must be a Pass / Pass: 100 to accept.
- Overall FF Needs to be a Y
- Signature is not required
- Respirator Fit Test Card is not a requirement for the document to be approved.
| - Issue = Test date on form
- Expiry = 1 year from issue date
| |
Respiratory Fit Test Record | - Name on test results to match the person registered (However shortened first names such as 'Chris' for 'Christopher' are accepted)
- Overall Fitness must be a Pass / Pass: 100 to accept.
- Overall FF Needs to be a Y
- Signature is not required
- Respirator Fit Test Card is not a requirement for the document to be approved.
| - Issue = Test date on form
- Expiry = 1 year from issue date
|
|
Category.test.medical | - Name on test results to match the person registered (However shortened first names such as 'Chris' for 'Christopher' are accepted)
- certificate showing completion of medical
- Black and white copies accepted
| - Issue date to be recorded
- No expiry date required
|
|
Rail Medicals
Competency | Competency Requirements | Upload Requirements | Examples |
---|
Medical.Assessment.Category 1 | Person Verification - Name on Medical Must match Cardholder name in Onsite
(Shortened version of name is accepted EG. Chris for Christopher) - Date of Birth (DOB) for applicant must be shown on the medical (any page)
Verification of Results Verification Details - Assessment date (Or appointment date) must be recorded on the fitness for duty page
- Medical has been completed by a Registered Health Professional (RHP)
- RHP’s details should be shown (First and Last name OR First name initial with Last name and signature should be present)
- Category 1 (or Blue Category) to be displayed
- Black and white or colour is accepted
- Drug and alcohol testing results are not required to be displayed within the uploaded file however if the results are included, they must indicate a negative test result (unless declared positive but consistent with prescribed medication)
| - The issue date in Onsite should be recorded as the date the assessment or appointment took
place.
NOTE:The date for the signature requirement of the examining RHP should not be used in lieu of the assessment date if this information is missing from the form. NOTE: If you receive a medical document where more than one assessment date / date of completion is shown: Please use the assessment date from the fitness for duty page Calculating the Expiry Date The expiration date for this competency should always be calculated to occur as follows (Unless the individuals' medical states otherwise): Step 1 - Enter the current year
- Subtract the year of birth shown on the medical
- This will identify the individuals age (then refer to table below to calculate expiry)
Step 2 - Up to 50 years old - 5 yearly
- If aged 45 and 46 - 5 yearly
- Ages 47, 48 and 49 (the expiry would be set as their 52nd birthday)
- Age 50-60 - every 2 years
- From age 60 - renewed annually
|
|
Medical.Assessment.Category 2 | Person Verification - Name on Medical Must match Cardholder name in Onsite
(Shortened version of name is accepted EG. Chris for Christopher) - Date of Birth (DOB) for applicant must be shown on the medical (any page)
Verification of Results Verification Details - Assessment date (Or appointment date) must be recorded on the fitness for duty page
- Medical has been completed by a Registered Health Professional (RHP)
- RHP’s details should be shown (First and Last name OR First name initial with Last name and signature should be present)
- Category 2 (or Green Category) to be displayed
- Black and white or colour is accepted
- Drug and alcohol testing results are not required to be displayed within the uploaded file however if the results are included, they must indicate a negative test result (unless declared positive but consistent with prescribed medication)
| - The issue date in Onsite should be recorded as the date the assessment or appointment took
place.
NOTE:The date for the signature requirement of the examining RHP should not be used in lieu of the assessment date if this information is missing from the form. NOTE: If you receive a medical document where more than one assessment date / date of completion is shown: Please use the assessment date from the fitness for duty page Calculating the Expiry Date The expiration date for this competency should always be calculated to occur as follows (Unless the individuals' medical states otherwise): Step 1 - Enter the current year
- Subtract the year of birth shown on the medical
- This will identify the individuals age (then refer to table below to calculate expiry)
Step 2 - Up to 50 years old - 5 yearly
- If aged 45 and 46 - 5 yearly
- Ages 47, 48 and 49 (the expiry would be set as their 52nd birthday)
- Age 50-60 - every 2 years
- From age 60 - renewed annually
|
|
Medical.Assessment.Category 3 | Person Verification - Name on Medical Must match Cardholder name in Onsite
(Shortened version of name is accepted EG. Chris for Christopher) - Date of Birth (DOB) for applicant must be shown on the medical (any page)
Verification of Results Verification Details - Assessment date (Or appointment date) must be recorded on the fitness for duty page
- Medical has been completed by a Registered Health Professional (RHP)
- RHP’s details should be shown (First and Last name OR First name initial with Last name and signature should be present)
- Category 3 (Or Mauve Category) to be displayed
- Category 1 medical document CAN be accepted in lieu of a category 3 rail medical but category 3 medical rules must be applied
- Black and white or colour is accepted
- Drug and alcohol testing results are not required to be displayed within the uploaded file however if the results are included, they must indicate a negative test result (unless declared positive but consistent with prescribed medication)
| - The issue date in Onsite should be recorded as the date the assessment or appointment took place.
NOTE:The date for the signature requirement of the examining RHP should not be used in lieu of the assessment date if this information is missing from the form. NOTE: If you receive a medical document where more than one assessment date / date of completion is shown: Please use the assessment date from the fitness for duty page Calculating the Expiry Date Step 1 - Enter the current year
- Subtract the year of birth shown on the medical
- This will identify the individuals age (then refer to table below to calculate expiry)
Step 2 - The expiration date for this competency should always be calculated to occur on the applicants 40th
birthday, so you would enter 40 minus the individuals age, then add this number to the current year which will give the year of expiry. The day and month will be as per date of birth.
Example for medical conducted in 2017: 2017 - 1991 = 26 40 - 26 = 14 2017 + 14 = 2031 Exception - If the applicant had the medical completed within 12 months of their 40th birthday you would then
allocate an expiration of 5 years - After the applicant passes the age of 40, medicals are to be completed every 5 years
- When the doctor has explicitly indicated an earlier review date is required this date must be entered
as the expiry
NOTE: The fitness for duty page of the TFNSW Contractor Health Assessment Request and Report Form can be accepted with an expiration of 40 years despite the declaration sentence which is printed on the form which states 'This assessment is only valid for five years from the date of my signature below ... 'however if the doctor has explicitly indicated an earlier review date is required as a recommendation which is separate to that sentence / declaration, this should be used for the expiration date entry in Onsite.
|
|
Page Version: 25
Note: This Document is not version controlled when printed.