Competency | Competency Requirements | Upload Requirements | Examples |
---|
Network Operator.Access.SC1000A - Ausgrid - Substation Entry Proof of initial classroom course | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
Required evidence to be uploaded is a form of acceptable evidence that is acceptable for any of the following competencies respective business rule: - Network Operator.Access.SC1000A - Ausgrid - Substation Entry
| - Record the Issue date within Onsite:
- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
- NO EXPIRY DATE
|
|
Network Operator.Access.Proof of attending the initial Access Permit Recipient Restricted course | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
Required evidence to be uploaded is a form of acceptable evidence that is acceptable for any of the following competencies respective business rule: Network Operator.Access.APR0068 - Ausgrid - Access Permit
| - Record the Issue date within Onsite:
- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
- NO EXPIRY DATE
|
|
Network Operator.Access.APR0068 - Ausgrid - Access Permit Recipient (Restricted) APR0068 - Ausgrid - Access Permit Recipient (Restricted) | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
For Ausgrid Training Passport Uploaded document must also include page of passport that shows ‘Ausgrid - Access Permit Recipient (Restricted)’ as having been achieved with: - Ausgrid / Energy Australia stamp being shown on this page
- Date of Training
- Trainer / Assessor Name
- Signature
If an applicant submits documentation that references 'unrestricted' this may be accepted
For Pegasus LMS Issued Certificate: - Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Certificate will show completion of either: Access Permit Recipient (APR) Refresher OR Access Permit Recipient (APR) Restricted
- Certificate will show both Pegasus and Ausgrid Logos
- Date of completion will be shown
| - Record the Issue date within Onsite:
- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
- Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).
| |
Network Operator.Access.SC1000A - Ausgrid - Substation Entry | Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show: - Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
Uploaded document must also include page of passport that shows ‘Substation Entry’ as having been achieved with: - Ausgrid / Energy Australia stamp being shown on this page
- Date of Training
- Trainer / Assessor Name
- Signature
For Pegasus LMS Issued Certificate: - Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Certificate will show completion of either: Substation Entry
- Certificate will show both Pegasus and Ausgrid Logos
- Date of completion will be shown
| - Record the Issue date within Onsite:
- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
| |
Network Operator.Certificate.AMGS0001 - Field Recording of Network Assets | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
- Course code to be listed on certificate to match the nominated coding and title within Onsite: AMGS0001 - Field Recording of Network Assets
- No expiry
| - Record the Issue date within Onsite:
- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
|
|
Network Operator.Certificate.I0102 - Ausgrid - Environmental Awareness | - Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:
- Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
- Uploaded document must also include page of passport that shows ‘Environmental’ or Enviro as having been achieved with:
- Ausgrid / Energy Australia stamp being shown on this page
- Date of Training
- Trainer / Assessor Name
- Signature
- Ausgrid Certificate of Completion is accepted. It must show:
- Environmental Management and Sustainability
- Contractors Name
- Date of completion
- Screen shot of training
- Date of Training
- Contractors Name
- Environmental Awareness Assessment
| Record the Issue date within Onsite: Pegasus Staff click here to read additional crucial business rule information prior to file verification | |
Network Operator.Certificate.M1398 - Streetlight Serving Worker Electrical (Electrically Trained and Qualified) | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
- Course code to be listed on certificate to match the nominated coding and title within Onsite: M1398 - Streetlight Serving Worker Electrical (Electrically Trained and Qualified)
- No expiry
| Record the Issue date within Onsite:- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
|
|
Network Operator.Certificate.M1397 - Streetlight Serving Worker Electrical (Electrically Trained and Qualified) | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
- Course code to be listed on certificate to match the nominated coding and title within Onsite: M1397 - Streetlight Serving Worker Electrical (Electrically Trained and Qualified)
- No expiry
| Record the Issue date within Onsite:- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
|
|
Network Operator.Certificate.M1400 - Streetlight Serving Worker Electrical (Electrically Trained and Qualified) | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
- Course code to be listed on certificate to match the nominated coding and title within Onsite: M1400 - Streetlight Serving Worker Electrical (Electrically Trained and Qualified)
- No expiry
| Record the Issue date within Onsite: - Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
|
|
Network Operator.Certificate.M1425 - Pole Inspection and Treatment | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
- Course code to be listed on certificate to match the nominated coding and title within Onsite: M1425 - Pole Inspection and Treatment
- No expiry
| Record the Issue date within Onsite:- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
|
|
Network Operator.Certificate.M1429 - Handling Burnt CCA Poles | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
- Course code to be listed on certificate to match the nominated coding and title within Onsite: M1429 - Handling Burnt CCA Poles
- No expiry
| Record the Issue date within Onsite:- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
|
|
Network Operator.Certificate.M1503 - Ausgrid - Lineworkers Fall Arrest Harness | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
- Course code to be listed on certificate to match the nominated coding and title within Onsite: M1503 - Ausgrid - Lineworkers Fall Arrest Harness
- No expiry
NOTE: Ausgrid will accept the Certificate III in ESI - Power Systems - Distribution UET30612 NOTE: Ausgrid will accept the Skills Passport with code 1399 - Luminaire Servicing Worker Australian Electricity Supply Industry (ESI) issued skills passport must show: - Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
- loaded document must also include page of passport that shows ‘1399 - Luminaire Servicing Worker’ as having been achieved with:
- Ausgrid / Energy Australia stamp being shown on this page
- Date of Training
- Trainer / Assessor Name
- Signature
| Record the Issue date within Onsite:- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
| |
Network Operator.Certificate.M1806 - Safe Working Aloft | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
- Course code to be listed on certificate to match the nominated coding and title within Onsite: M1806 - Safe Working Aloft
- No expiry
NOTE: Ausgrid will accept Certificate III in ESI - Power Systems - Distribution Overhead UET30612 | Record the Issue date within Onsite:- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
| |
Network Operator.Certificate.M1809 - Ausgrid - Pre-working aloft procedures (NS146) | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
- Course code to be listed on certificate to match the nominated coding and title within Onsite: M1809 - Ausgrid - Pre-working aloft procedures (NS146) or Ausgrid will accept M1397 - Streetlight Serving Worker Electrical. Ausgrid will also accept the Certificate III ESI Distribution (UET30209), Cert III in in ESI - Power Systems - Distribution Overhead UET30612 or UET30206 Certificate III in ESI - Distribution
- No expiry
| Record the Issue date within Onsite:- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
|
|
Network Operator.Certificate.M2170 – Cable Pit Safety and Awareness | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
- Course code to be listed on certificate to match the nominated coding and title within Onsite: M2170 – Cable Pit Safety and Awareness
- No expiry
| Upload Requirements: Record the Issue date within Onsite: - Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
|
|
Network Operator.Certificate.QUAL00066 - GIS Map Reading | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
- Course code to be listed on certificate to match the nominated coding and title within Onsite: QUAL00066 - GIS Map Reading
- No expiry
| Record the Issue date within Onsite:- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
| |
Network Operator.Certificate.SC1100A - Working Near or Around Underground Cables | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
Accepted Form/s of Evidence: - Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:
- Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
- Uploaded document must include page of passport that shows 'SC1100' ‘SC1100A’ OR 'SC1200' OR 'Work w Live PowerCables in EA' OR 'Working Near Underground Cable' OR 'Working Near U/G Assets' for evidence of Working Near Underground Cables as having been achieved with:
- Ausgrid / Energy Australia stamp being shown on this page
- Date of Training
- Trainer / Assessor Name
- Signature
2. Tafe issued certificate showing completion of 'Work Safely Near Underground Assets - 26919' course 3. Screenshot showing completion of 'Apply Access Procedures to Work on or Near Electrical Network Infrastructure (either initial or refresher)' 4. RTO issued Card or Certificate showing completion of course in Working Safely Near overhead and underground assets 5. Pegasus LMS Issued Certificate: - Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Certificate will show completion of: Working Near Or Around Underground Cables
- Certificate will show both Pegasus and Ausgrid Logos
- Date of completion will be shown
| Record the Issue date within Onsite:- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
| |
Network Operator.Certificate.SSAB1001 - Ausgrid - Asbestos Awareness | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
- Accepted forms of evidence:
- Ausgrid issued certificate showing completion of SSAB1001 - Ausgrid - Asbestos Awareness
- RTO issued Statement of Attainment showing completion of 'Conduct asbestos assessment associated with removal' (accepted as this is a higher qualification)
- RTO issued Statement of Attainment showing completion of 'Remove Friable Asbestos' (accepted as this is a higher qualification
- NSW Workcover issued licence for 'Asbestos Assessor'
| Record the Issue date within Onsite:- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
| |
Network Operator.Certificate.TTDO1374 - Introduction to overhead line components | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
- Course code to be listed on certificate to match the nominated coding and title within Onsite: TTDO1374 - Introduction to overhead line components
- No expiry
| Record the Issue date within Onsite:- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
|
|
Network Operator.Certificate.TTDO1375 - Line inspection | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
- Course code to be listed on certificate to match the nominated coding and title within Onsite: TTDO1375 - Line inspection
- No expiry
| Record the Issue date within Onsite:- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
|
|
Network Operator.Certificate.TTDO1399 - Luminaire Servicing Worker | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
- Course code to be listed on certificate to match the nominated coding and title within Onsite: TTDO1399 - Luminaire Servicing Worker
- No expiry
| Record the Issue date within Onsite:- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
| |
Network Operator.Certificate.TTDO1570 - Ausgrid - Application of temporary insulation | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
- Course code to be listed on certificate to match the nominated coding and title within Onsite: TTDO1570 - Ausgrid - Application of temporary insulation
- No expiry
NOTE: Ausgrid will accept Certificate III in ESI Power Systems - Distribution Overhead UET30612 or Ausgrid will also accept the Certificate III ESI Distribution (UET30209) NOTE: Ausgrid will accept Skills Passport code M1397 - Streetlight Servicing Worker Electrical Australian Electricity Supply Industry (ESI) issued skills passport must show: - Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
- loaded document must also include page of passport that shows ‘M1397 - Streetlight Servicing Worker Electrical’ as having been achieved with:
- Ausgrid / Energy Australia stamp being shown on this page
- Date of Training
- Trainer / Assessor Name
- Signature
| Record the Issue date within Onsite:- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
| |
Network Operator.Certificate.TTDO1804 - Ausgrid - Erection of Earths | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
- Course code to be listed on certificate to match the nominated coding and title within Onsite: TTDO1804 - Ausgrid - Erection of Earths
- No expiry
| Record the Issue date within Onsite:- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
|
|
Network Operator.Certificate.TTGE1574 - Neutral and Phase Identification Using Test Lamps | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
- Course code to be listed on certificate to match the nominated coding and title within Onsite: TTGE1574 - Neutral and Phase Identification Using Test Lamps
- No expiry
NOTE: Ausgrid will accept Certificate III in ESI - Power Systems - Distribution Overhead UET30612 or Ausgrid will also accept the Certificate III ESI Distribution (UET30209) or passport with code competency of 1804 | Record the Issue date within Onsite:- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
| |
Network Operator.Certificate.TTPO0003 - Private Pole and Aerial Mains Inspection: Bushfire Risks | - Applicants name to be shown on documentation
- Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
- Course code to be listed on certificate to match the nominated coding and title within Onsite: TTPO0003 - Private Pole and Aerial Mains Inspection: Bushfire Risks
- No expiry
| Record the Issue date within Onsite:- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
|
|