Utilities Management Business Rules | Accredited Services Providers | Individual Business Rules | Trades | Electrical

Competency	Competency Requirements	Upload Requirements
Electrical.Apprentice.Apprenticeship Training Contract as an Electrician from the Australian Apprenticeship Centre	Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. The uploaded evidence will be a copy of the applicants completed and signed apprenticeship contract The evidence must indicate the apprenticeship is / was for Electrician Please note letter from NSW Government Education- Training Services NSW is accepted Name of applicant to be shown Must show issue and expiry date	The date of contract commencement on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none Issue date= Date of Commencement Expiry date= Full term completion date
Electrical.Authorised.Previously authorised with Category 1 – Disconnect and Reconnect as at the 30 December 2016	Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. Accepted Forms of Evidence: 1. An ASP Authorisation card showing classes 2A and 2D that is either valid or expired by no more than 12 months This card can be issued by any NSW distribution network operator (Either Ausgrid, Essential Energy or Endeavour Energy).	The date of completion on the evidence should be recorded as the Issue Date in Pegasus (ONLY REQUIRED IF THE EVIDENCE SUPPLIED SHOWS AN ISSUE DATE) Expiry Date = None
Electrical.Certificate III.UTE31199 - Electrotechnology Systems Electrician	Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted course code/s: UTE31199 No expiry Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Electrical. Certificate III in Electrotechnology Electrician	Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted course code/s: UEE30811 OR UEE30807 OR UTE31199 OR UEE308 No expiry Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Electrical. Certificate III. UET30612- Certificate III in ESI -Power Systems - Distribution	Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted course code/s: UET30612, UET30209, UET30206 No expiry Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Electrical. Certificate III. UET30621- Certificate III in ESI - Distribution Overhead	Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted course code/s: UET30621 No expiry Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Electrical.Certificate III.UET30812 - Certificate III in ESI - Power Systems - Distribution Cable Jointing	Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UET30812 UET30409 UET30819 UET30406 Electricity Supply Industry Cable Jointing (Power Line) Pegasus Document / Certificate / Number No expiry Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Electrical.Licence.Electrical Contractors Licence endorsed with a (Q)	Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. Must be an electrical contractors licence showing 'Q'. Screenshots from websites are not accepted - Must be copy of the Licence Must be issued by a relevant Australian state government authority with corresponding logo shown on licence. i.e. NSW Department of Fair Trading Black and white or coloured copy of evidence can be accepted.	Issue date = none Expiry Date = The date of expiration on the evidence
Electrical.Licence.Electrical Supervisors Licence	Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. Must be issued by a relevant Australian state government authority with corresponding logo shown on licence. i.e. NSW Department of Fair Trading Accepted form/s of evidence: Must be a copy of an electrical licence showing 'Supervisor Certificate' OR Screenshot from onegov.nsw.gov.au website showing 'Supervisor Certificate'	Issue date = none Expiry Date = The date of expiration on the evidence
Electrical.Statement of Attainment.Install, set up and commission interval metering	Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus Documentation which has been found to be subject to alterations will not be accepted RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this Completion date or issue date must be displayed Accepted Course Titles / Codes: UEEEL0013 UEENEEG171A UEENEEG071C UEENEEG071B No expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Electrical.Statement of Attainment. Install and replace energy meters and associated equipment	Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UETDRIS014 UETTDRIS60 UETTDRIS60A UETTDRIS20B UETTDRIS20A No expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Electrical.Statement of Attainment.Lay power cables	Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UETTDRCJ01A - Lay electrical cables UETTDRCJ01B - Lay electrical cables UETTDRCJ21A - Lay ESI electrical cables UETTDRCJ21 - Lay ESI electrical cables UETDRDU016 - Lay power cables Pegasus Document / Certificate / Number No expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Electrical.Statement of Attainment.Joint, terminate and maintain low voltage underground paper insulated cable	Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UETDRDU014 UETTDRCJ22 UETTDRCJ22A UETTDRCJ02B UETTDRCJ02A UTTNTD307A Pegasus Document / Certificate / Number No expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Electrical.Statement of Attainment.Joint, terminate and maintain high voltage underground paper insulated cable	Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UETDRDU012 UETTDRCJ23 UETTDRCJ23A UETTDRCJ03B UETTDRCJ03A No expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Electrical.Statement of Attainment. Joint, terminate and maintain low voltage underground polymeric cable	Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UETDRDU013 UETTDRCJ27 UETTDRCJ27A UETTDRCJ07B UETTDRCJ07A Tafe issued certificate or transcript displaying '7793BS - Cable jointing 1 - LV Polymeric' and '7793BT - Cable jointing 2 - HV Polymeric' No expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Electrical.Statement of Attainment. Joint, terminate and maintain low voltage underground polymeric cable	Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UETDRDU015 UETTDRCJ26 UETTDRCJ26A UETTDRCJ06B UETTDRCJ06A Passport document showing stamp for Underground Services Cat 2 Tafe issued certificate displaying 'Underground Service Mains – Installation (Cat 2) Code – 31755’ Tafe issued certificate or transcript displaying '7793BS - Cable jointing 1 - LV Polymeric' and '7793BT - Cable jointing 2 - HV Polymeric' No expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Install and maintain low voltage underground services	Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UETDRIS011 UETTDRIS55 UETTDRIS55A UETTDRIS15B UETTDRIS15A RTO issued certificate showing completion of Underground Service Mains - Installation (Cat 2) Ausgrid OR Energy Australia issued certificate showing completion of Underground Service Installation - Connection & Disconnection Procedures - CA 0002 Skills passport showing stamp with indication of completion of Underground Services Cat 2 RPL'ed units on transcript are acceptable No expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Electrical.Statement of Attainment.Install and maintain low voltage overhead services	Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. Accepted form/s of evidence: Statement of Attainment OR Transcript showing anyone of the following : UETDRIS010, UETTDRIS56, UETTDRIS56A, UETTDRIS16B & UETTDRIS16A RPL'ed units on transcript are acceptable Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document. Statement of Attainment must comply with ASQA Requirements per: https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements 2. Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code 3. RTO issued certificate or transcript showing completion of Overhead Service Mains - Installation (Cat 3) 4. Skills passport showing stamp with indication of completion of Overhead Services (Cat 3) Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Safety.Qualified.Meet requirements for Class 2D - Metering & Energizing Installations	Accepted form/s of evidence: Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed No expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. Accepted form/s of evidence: An ASP Authorisation card showing 2D is acceptable provided it is within 6 months from the expiration date and has been issued by an NSW distribution network operator (Ausgrid, Essential Energy or Endeavour Energy) OR Energy Australia or IAC issued certificate or transcript showing completion of: Metering / Metering and Energising New Electrical Installations - 100A. CA 0004 OR CS 0005 OR UEERE0001 - Apply environmentally and sustainable procedures in the energy sector¹ AND either UETDRIS014 - Install and replace energy meters and associated equipment¹; OR UEEEL0013 - Install, set up and commission interval metering¹ ¹ Upon verification; an individual holding an equivalent unit of competency will also meet the unit of competency requirements.	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Electrical.Qualified.Apply environmentally and sustainable procedures in the energy sector	Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UEERE0001 UEENEEK142A UEENEEK042A No expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Safety.Qualified.Category 4 - Metering & Energizing Installations	Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Accepted Form/s of Evidence: RTO issued Certificate or Transcript showing completion of Cat 4 - Metering / Metering & Energising OR Metering - Cat 4 / Cat 4 - Metering OR CA004 Australian Electricity Supply Industry (ESI) issued skills passport: Ausgrid issued Certificate of Completion showing Services Metering & Energising Electrical Installations CA 0005 (Categories 1 & 4) Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant Uploaded document must include page of passport that shows ‘Cat 4 - Metering/ Metering & Energising’ as having been achieved with: Ausgrid OR Energy Australia stamp being shown on this page Date of Training Trainer / Assessor Name & Signature Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. Documentation which has been found to be subject to alterations will not be accepted.	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Electrical.Statement of Attainment.Comply with environmental requirements	Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UETDREL002 UETTDREL13 UETTDREL13A UETTDREL03B UETTDREL03A No expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Electrical.Statement of Attainment.Control vegetation in the vicinity of live electrical apparatus from within the tree	Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UETDRVC006 · UETTDRVC21 (Completion date must be prior to 20/09/2022) · 12-month expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).

Competency	Competency Requirements	Upload Requirements
Electrical.Apprentice.Apprenticeship Training Contract as an Electrician from the Australian Apprenticeship Centre	Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. The uploaded evidence will be a copy of the applicants completed and signed apprenticeship contract The evidence must indicate the apprenticeship is / was for Electrician Please note letter from NSW Government Education- Training Services NSW is accepted Name of applicant to be shown Must show issue and expiry date	The date of contract commencement on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none Issue date= Date of Commencement Expiry date= Full term completion date
Electrical.Authorised.Previously authorised with Category 1 – Disconnect and Reconnect as at the 30 December 2016	Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. Accepted Forms of Evidence: 1. An ASP Authorisation card showing classes 2A and 2D that is either valid or expired by no more than 12 months This card can be issued by any NSW distribution network operator (Either Ausgrid, Essential Energy or Endeavour Energy).	The date of completion on the evidence should be recorded as the Issue Date in Pegasus (ONLY REQUIRED IF THE EVIDENCE SUPPLIED SHOWS AN ISSUE DATE) Expiry Date = None
Electrical.Certificate III.UTE31199 - Electrotechnology Systems Electrician	Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted course code/s: UTE31199 No expiry Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Electrical. Certificate III in Electrotechnology Electrician	Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted course code/s: UEE30811 OR UEE30807 OR UTE31199 OR UEE308 No expiry Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Electrical. Certificate III. UET30612- Certificate III in ESI -Power Systems - Distribution	Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted course code/s: UET30612, UET30209, UET30206 No expiry Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Electrical. Certificate III. UET30621- Certificate III in ESI - Distribution Overhead	Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted course code/s: UET30621 No expiry Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Electrical.Certificate III.UET30812 - Certificate III in ESI - Power Systems - Distribution Cable Jointing	Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UET30812 UET30409 UET30819 UET30406 Electricity Supply Industry Cable Jointing (Power Line) Pegasus Document / Certificate / Number No expiry Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Electrical.Licence.Electrical Contractors Licence endorsed with a (Q)	Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. Must be an electrical contractors licence showing 'Q'. Screenshots from websites are not accepted - Must be copy of the Licence Must be issued by a relevant Australian state government authority with corresponding logo shown on licence. i.e. NSW Department of Fair Trading Black and white or coloured copy of evidence can be accepted.	Issue date = none Expiry Date = The date of expiration on the evidence
Electrical.Licence.Electrical Supervisors Licence	Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. Must be issued by a relevant Australian state government authority with corresponding logo shown on licence. i.e. NSW Department of Fair Trading Accepted form/s of evidence: Must be a copy of an electrical licence showing 'Supervisor Certificate' OR Screenshot from onegov.nsw.gov.au website showing 'Supervisor Certificate'	Issue date = none Expiry Date = The date of expiration on the evidence
Electrical.Statement of Attainment.Install, set up and commission interval metering	Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus Documentation which has been found to be subject to alterations will not be accepted RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this Completion date or issue date must be displayed Accepted Course Titles / Codes: UEEEL0013 UEENEEG171A UEENEEG071C UEENEEG071B No expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Electrical.Statement of Attainment. Install and replace energy meters and associated equipment	Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UETDRIS014 UETTDRIS60 UETTDRIS60A UETTDRIS20B UETTDRIS20A No expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Electrical.Statement of Attainment.Lay power cables	Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UETTDRCJ01A - Lay electrical cables UETTDRCJ01B - Lay electrical cables UETTDRCJ21A - Lay ESI electrical cables UETTDRCJ21 - Lay ESI electrical cables UETDRDU016 - Lay power cables Pegasus Document / Certificate / Number No expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Electrical.Statement of Attainment.Joint, terminate and maintain low voltage underground paper insulated cable	Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UETDRDU014 UETTDRCJ22 UETTDRCJ22A UETTDRCJ02B UETTDRCJ02A UTTNTD307A Pegasus Document / Certificate / Number No expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Electrical.Statement of Attainment.Joint, terminate and maintain high voltage underground paper insulated cable	Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UETDRDU012 UETTDRCJ23 UETTDRCJ23A UETTDRCJ03B UETTDRCJ03A No expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Electrical.Statement of Attainment. Joint, terminate and maintain low voltage underground polymeric cable	Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UETDRDU013 UETTDRCJ27 UETTDRCJ27A UETTDRCJ07B UETTDRCJ07A Tafe issued certificate or transcript displaying '7793BS - Cable jointing 1 - LV Polymeric' and '7793BT - Cable jointing 2 - HV Polymeric' No expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Electrical.Statement of Attainment. Joint, terminate and maintain low voltage underground polymeric cable	Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UETDRDU015 UETTDRCJ26 UETTDRCJ26A UETTDRCJ06B UETTDRCJ06A Passport document showing stamp for Underground Services Cat 2 Tafe issued certificate displaying 'Underground Service Mains – Installation (Cat 2) Code – 31755’ Tafe issued certificate or transcript displaying '7793BS - Cable jointing 1 - LV Polymeric' and '7793BT - Cable jointing 2 - HV Polymeric' No expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Install and maintain low voltage underground services	Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UETDRIS011 UETTDRIS55 UETTDRIS55A UETTDRIS15B UETTDRIS15A RTO issued certificate showing completion of Underground Service Mains - Installation (Cat 2) Ausgrid OR Energy Australia issued certificate showing completion of Underground Service Installation - Connection & Disconnection Procedures - CA 0002 Skills passport showing stamp with indication of completion of Underground Services Cat 2 RPL'ed units on transcript are acceptable No expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Electrical.Statement of Attainment.Install and maintain low voltage overhead services	Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. Accepted form/s of evidence: Statement of Attainment OR Transcript showing anyone of the following : UETDRIS010, UETTDRIS56, UETTDRIS56A, UETTDRIS16B & UETTDRIS16A RPL'ed units on transcript are acceptable Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document. Statement of Attainment must comply with ASQA Requirements per: https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements 2. Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code 3. RTO issued certificate or transcript showing completion of Overhead Service Mains - Installation (Cat 3) 4. Skills passport showing stamp with indication of completion of Overhead Services (Cat 3) Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Safety.Qualified.Meet requirements for Class 2D - Metering & Energizing Installations	Accepted form/s of evidence: Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed No expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. Accepted form/s of evidence: An ASP Authorisation card showing 2D is acceptable provided it is within 6 months from the expiration date and has been issued by an NSW distribution network operator (Ausgrid, Essential Energy or Endeavour Energy) OR Energy Australia or IAC issued certificate or transcript showing completion of: Metering / Metering and Energising New Electrical Installations - 100A. CA 0004 OR CS 0005 OR UEERE0001 - Apply environmentally and sustainable procedures in the energy sector¹ AND either UETDRIS014 - Install and replace energy meters and associated equipment¹; OR UEEEL0013 - Install, set up and commission interval metering¹ ¹ Upon verification; an individual holding an equivalent unit of competency will also meet the unit of competency requirements.	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Electrical.Qualified.Apply environmentally and sustainable procedures in the energy sector	Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UEERE0001 UEENEEK142A UEENEEK042A No expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Safety.Qualified.Category 4 - Metering & Energizing Installations	Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Accepted Form/s of Evidence: RTO issued Certificate or Transcript showing completion of Cat 4 - Metering / Metering & Energising OR Metering - Cat 4 / Cat 4 - Metering OR CA004 Australian Electricity Supply Industry (ESI) issued skills passport: Ausgrid issued Certificate of Completion showing Services Metering & Energising Electrical Installations CA 0005 (Categories 1 & 4) Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant Uploaded document must include page of passport that shows ‘Cat 4 - Metering/ Metering & Energising’ as having been achieved with: Ausgrid OR Energy Australia stamp being shown on this page Date of Training Trainer / Assessor Name & Signature Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. Documentation which has been found to be subject to alterations will not be accepted.	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Electrical.Statement of Attainment.Comply with environmental requirements	Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UETDREL002 UETTDREL13 UETTDREL13A UETTDREL03B UETTDREL03A No expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Electrical.Statement of Attainment.Control vegetation in the vicinity of live electrical apparatus from within the tree	Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UETDRVC006 · UETTDRVC21 (Completion date must be prior to 20/09/2022) · 12-month expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).

Page Version: 121

Note: This Document is not version controlled when printed.

Page tree

Utilities Management Business Rules | Accredited Services Providers | Individual Business Rules | Trades | Electrical