Page tree
#trackbackRdf

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


CompetencyCompetency RequirementsUpload RequirementsExamples

Welder.Certificate.AS 1796-2001 – No 1

  • Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
  • A certificate or card can be accepted
  • Must show completion of Manual metal-arc welding (MMAW) of welds in carbon steel plate and carbon steel pipe over 600 mm outside diameter (single vee welded from both sides). 
  • If card is uploaded, both sides of card should be displayed in uploaded file
  • Evidence must be issued by a registered training organisation (RTO)
  • There must be an indication of the number that the applicant was certified in
  • Black and white or colour copy can be accepted


·         Date of completion shown on the evidence should be recorded in Onsite as the Issue Date


Welder.Certificate.AS 1796-2001 – No 10

  • Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
  • A certificate or card can be accepted
  • Must show completion of Welding Supervisor
  • If card is uploaded, both sides of card should be displayed in uploaded file
  • Evidence must be issued by a registered training organisation (RTO)
  • There must be an indication of the number that the applicant was certified in
  • Black and white or colour copy can be accepted


  • Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

Welder.Certificate.AS 1796-2001 – No 1E

  • Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
  • A certificate or card can be acceptedMust show completion of Manual metal-arc welding (MMAW) of welds in carbon steel plate and carbon steel pipe over 270 mm outside diameter (single vee welded from one side only). 
  • If card is uploaded, both sides of card should be displayed in uploaded file
  • Evidence must be issued by a registered training organisation (RTO)
  • There must be an indication of the number that the applicant was certified in
  • Black and white or colour copy can be accepted


  • Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

Welder.Certificate.AS 1796-2001 – No 2

  • Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
  • A certificate or card can be acceptedMust show completion of Manual metal-arc welding (MMAW) of welds in carbon steel pipe (single vee weld from one side only). 
  • If card is uploaded, both sides of card should be displayed in uploaded file
  • Evidence must be issued by a registered training organisation (RTO)
  • There must be an indication of the number that the applicant was certified in
  • Black and white or colour copy can be accepted


  • Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

Welder.Certificate.AS 1796-2001 – No 3

  • Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
  • A certificate or card can be acceptedMust show completion of Manual metal-arc welding (MMAW) of welds in carbon steel pipe (single vee weld from one side only). 
  • If card is uploaded, both sides of card should be displayed in uploaded file
  • Evidence must be issued by a registered training organisation (RTO)
  • There must be an indication of the number that the applicant was certified in
  • Black and white or colour copy can be accepted


  • Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

Welder.Certificate.AS 1796-2001 – No 3E

  • Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
  • A certificate or card can be acceptedMust show completion of Manual metal-arc welding (MMAW) of welds using hydrogen controlled electrodes in alloy steel plate and alloy steel pipe over 270 mm outside diameter (single vee weld from one side only)
  • If card is uploaded, both sides of card should be displayed in uploaded file
  • Evidence must be issued by a registered training organisation (RTO)
  • There must be an indication of the number that the applicant was certified in
  • Black and white or colour copy can be accepted


  • Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

Welder.Certificate.AS 1796-2001 – No 4

  • Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
  • A certificate or card can be acceptedMust show completion of Manual metal-arc welding (MMAW) of weld using hydrogen-controlled electrodes in alloy steel pipe (single vee welded from one side only)
  • If card is uploaded, both sides of card should be displayed in uploaded file
  • Evidence must be issued by a registered training organisation (RTO)
  • There must be an indication of the number that the applicant was certified in
  • Black and white or colour copy can be accepted


  • Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

Welder.Certificate.AS 1796-2001 – No 5

  • Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
  • A certificate or card can be acceptedMust show completion of Gas tungsten-arc welding (GTAW) root run and manual metal-arc welding (MMAW) of welds using hydrogen-controlled electrodes in alloy steel pipe (single vee welded from one side only)
  • If card is uploaded, both sides of card should be displayed in uploaded file
  • Evidence must be issued by a registered training organisation (RTO)
  • There must be an indication of the number that the applicant was certified in
  • Black and white or colour copy can be accepted


  • Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

Welder.Certificate.AS 1796-2001 – No 6

  • Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
  • A certificate or card can be accepted
  • Must show completion of Gas welding (GW) (single vee welded from one side only)
  • If card is uploaded, both sides of card should be displayed in uploaded file
  • Evidence must be issued by a registered training organisation (RTO)
  • There must be an indication of the number that the applicant was certified in
  • Black and white or colour copy can be accepted


  • Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

Welder.Certificate.AS 1796-2001 – No 7

  • Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
  • A certificate or card can be acceptedMust show completion of Gas tungsten-arc welding (GTAW) (single vee welded from one side only)
  • If card is uploaded, both sides of card should be displayed in uploaded file
  • Evidence must be issued by a registered training organisation (RTO)
  • There must be an indication of the number that the applicant was certified in
  • Black and white or colour copy can be accepted


  • Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

Welder.Certificate.AS 1796-2001 – No 8F

  • Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
  • A certificate or card can be accepted
  • Must show completion of Flux cored arc welding (FCAW) of plate and pipe
  • If card is uploaded, both sides of card should be displayed in uploaded file
  • Evidence must be issued by a registered training organisation (RTO)
  • There must be an indication of the number that the applicant was certified in
  • Black and white or colour copy can be accepted


  • Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

Welder.Certificate.AS 1796-2001 – No 8G

  • Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
  • A certificate or card can be acceptedMust show completion of Flux cored arc welding (FCAW) of plate and pipe
  • If card is uploaded, both sides of card should be displayed in uploaded file
  • Evidence must be issued by a registered training organisation (RTO)
  • There must be an indication of the number that the applicant was certified in
  • Black and white or colour copy can be accepted


  • Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

Welder.Certificate.AS 1796-2001 – No 9

  • Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
  • A certificate or card can be accepted
  • Must show completion of Automatic Welding
  • If card is uploaded, both sides of card should be displayed in uploaded file
  • Evidence must be issued by a registered training organisation (RTO)
  • There must be an indication of the number that the applicant was certified in
  • Black and white or colour copy can be accepted


  • Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

Fabrication Metal & Welding.Qualified.Welding Certificate
  • Applicants name to be shown on documentation
  • Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
  • Recognised Training Institution OR state government appointed authority name to be displayed on document
  • Course title and / or associated level to be listed on evidence to match the nominated competency branch that is shown in the competency naming convention
  • Document / Certificate / Number to be shown

Evidence must show:

  • AS/NZS 2980:2018 (minimum requirement)

Or

  • AS/NZS ISO 9606-1


Accepted forms of evidence are:

  • Certificate verifying completion of full qualification (EG Copy of Degree, Certificate of Proficiency, Trade Certificate
  • Completion of apprenticeship papers
  • Licence or ticket that verifies full qualification
  • Website screenshot from relevant state gov authority website verifying trade qual
  • Letter from training organisation or state gov authority verifying the full qualification


Evidence that is not accepted:

  • Transcripts or Statement of attainment
  • Scanned document to be clearly legible
  • Documentation which has been found to be subject to alterations will not be accepted.
  • Issue Date: The date of completion on the evidence should be recorded as the Issue Date in Pegasus
  • Expiry Date: Only record this If expiry date is shown on the evidence