Page tree
#trackbackRdf

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


CompetencyCompetency RequirementsUpload RequirementsExamples
Electrical.Apprentice.Apprenticeship Training Contract as an Electrician from the Australian Apprenticeship Centre
  • Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.
  • The uploaded evidence will be a copy of the applicants completed and signed apprenticeship contract
  • The evidence must indicate the apprenticeship is / was for Electrician


  • The date of contract commencement on the evidence should be recorded as the Issue Date in Pegasus
  • Expiry date = none

Electrical.Authorised.Previously authorised with Category 1 – Disconnect and Reconnect as at the 30 December 2016
  • Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.

Accepted Forms of Evidence:

  1. Evidence that shows that the applicant was previously authorised with Ausgrid for Category 1 – Disconnect and Reconnect as at the 30 December 2016 WITH either Movement of Point of Attachment training evidence included within the uploaded file OR CAT 3 training in overhead service mains evidence included within the uploaded file.

NOTE: Ausgrid may choose to accept just the Category 1 – Disconnect and Reconnect evidence on its own if the evidence is escalated and found to be subject to grandfathered training


2. An ASP Authorisation card showing classes 2A and 2D that is either valid or expired by no more than 6 months

This card can be issued by any NSW distribution network operator (Either Ausgrid, Essential Energy or Endeavour Energy).


3. Australian Electricity Supply Industry (ESI) issued skills passport is accepted.

Must include either the cover page of the passport document showing the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant

Uploaded document must include page of passport that shows Category 1 – Disconnect and Reconnect with

  • Ausgrid or Energy Australia stamp being shown on this page
  • Date of Training
  • Trainer / Assessor Name & Signature


  • The date of completion on the evidence should be recorded as the Issue Date in Pegasus (ONLY REQUIRED IF THE EVIDENCE SUPPLIED SHOWS AN ISSUE DATE)
  • Expiry Date = None

Electrical. Certificate III. UEE30811 - Certificate III in Electrotechnology Electrician

    • Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
    • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
    • Documentation which has been found to be subject to alterations will not be accepted.
    • RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
    • Recognised Training Institution’s name to be displayed on document.
    • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
    • Completion date or issue date must be displayed
    • Accepted course code/s: UEE30811 OR UEE30807
    • No expiry
    • Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

     

    For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

     

    Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification


  • The date of completion on the evidence should be recorded as the Issue Date in Pegasus
  • Expiry date = none

Electrical.Certificate III.UET30812 - Certificate III in ESI - Power Systems - Distribution Cable Jointing
  •  Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.
  • RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
  • Recognised Training Institution’s name to be displayed on document.
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Accepted Course Titles / Codes:
    • UET30812
    • UET30409
    • UET30819
    • UET30406
    • Electricity Supply Industry Cable Jointing (Power Line)
  • Pegasus Document / Certificate / Number
  • No expiry
  • Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

 

For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

  • The date of completion on the evidence should be recorded as the Issue Date in Pegasus
  • Expiry date = none

Electrical.Licence.Electrical Contractors Licence endorsed with a (Q)
  •  Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.
  • Must be an electrical contractors licence showing 'Q'.
  • Screenshots from websites are not accepted - Must be copy of the Licence
  • Must be issued by a relevant Australian state government authority with corresponding logo shown on licence. i.e. NSW Department of Fair Trading Black and white or coloured copy of evidence can be accepted.
  • Issue date = none
  • Expiry Date = The date of expiration on the evidence


Electrical.Licence.Electrical Supervisors Licence


  • Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.
  • Must be issued by a relevant Australian state government authority with corresponding logo shown on licence. i.e. NSW Department of Fair Trading

Accepted form/s of evidence:

  • Must be a copy of an electrical licence showing 'Supervisor Certificate' OR
  • Screenshot from onegov.nsw.gov website showing 'Supervisor Certificate'
  • Issue date = none
  • Expiry Date = The date of expiration on the evidence



Electrical.Statement of Attainment. UEENEEG171A – install, setup and commission interval metering
  • Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.
  • Statement of Attainment OR Transcript showing the relevant unit of competency must be uploaded.
  • RPL'ed units on trancscript are acceptable
  • Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
  • Statement of Attainment must comply with ASQA Requirements per:
  • https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements
  • Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

NOTE:  RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details.

NOTE:  Ausgrid will accept Cat 4 - Metering & Energising approved industry training for persons who have been authorised with Ausgrid prior to 31 December 2015.


  • The date of completion on the evidence should be recorded as the Issue Date in Pegasus
  • Expiry date = none

Electrical.Statement of Attainment.UETTDRIS60A - Install and replace power system energy meters and associated equipment
  • Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.

Accepted form/s of evidence:

  1. RTO issued statement of attainment or transcript showing completion of: UETTDRIS60A - Install and replace power system energy meters and associated equipment

Statement of Attainment must comply with ASQA Requirements per: https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements

RPL'ed units on transcript are acceptable.

Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

 RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details.

2. RTO issued certificate showing: Cat 4 - Metering & Energising approved industry training for persons who have been authorised with Ausgrid prior to 31 December 2015.


  • Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
  • Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.
  • Documentation which has been found to be subject to alterations will not be accepted.
  • The date of completion on the evidence should be recorded as the Issue Date in Pegasus
  • Expiry date = none

Electrical.Statement of Attainment.UETTDRCJ21A – Lay ESI cables
  • Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.

Accepted form/s of evidence:

  1. Tafe issued certificate displaying 'Underground Service Mains – Installation (Cat 2) Code – 31755’
  2. Tafe issued certificate or transcript displaying '7793BS - Cable jointing 1 - LV Polymeric' and '7793BT - Cable jointing 2 - HV Polymeric'
  3. Statement of Attainment or transcript showing the relevant unit of competency must be uploaded
  • RPL'ed units on trancscript are acceptable
  • Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code


  • The date of completion on the evidence should be recorded as the Issue Date in Pegasus
  • Expiry date = none

Electrical.Statement of Attainment.UETTDRCJ22A – Install and maintain de-energised low voltage underground paper insulated cables
  • Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.
  • Statement of Attainment OR Transcript showing the relevant unit of competency must be uploaded.
  • Accepted Unit Code/s or Course Wording:
    • UETTDRCJ22A – Install and maintain de-energised low voltage underground paper insulated cables
    • UETTDRCJ22 - Install and maintain de-energised low voltage underground paper insulated cables
    • UETTDRCJ02B - Install and maintain de-energised LV underground paper insulated cables.
    • UTTNTD307A - 'Install and maintain underground paper-lead cables'
  • RPL'ed units on trancscript are acceptable
  • Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
  • Statement of Attainment must comply with ASQA Requirements per:
  • https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements
  • Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

 NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

  • The date of completion on the evidence should be recorded as the Issue Date in Pegasus
  • Expiry date = none

Electrical.Statement of Attainment.UETTDRCJ23A – Install and maintain de-energised high voltage underground paper insulated cables
  • Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.
  • Statement of Attainment OR Transcript showing the relevant unit of competency must be uploaded.
  • RPL'ed units on trancscript are acceptable
  • Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
  • Statement of Attainment must comply with ASQA Requirements per:
  • https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements
  • Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

  • The date of completion on the evidence should be recorded as the Issue Date in Pegasus
  • Expiry date = none

Electrical.Statement of Attainment.UETTDRCJ26A – Install and maintain de-energised low voltage underground polymeric cables
  • Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.

Accepted form/s of evidence:

  1. Tafe issued certificate displaying 'Underground Service Mains – Installation (Cat 2) Code – 31755’
  2. Tafe issued certificate or transcript displaying '7793BS - Cable jointing 1 - LV Polymeric' and '7793BT - Cable jointing 2 - HV Polymeric'
  3. Statement of Attainment or transcript showing either UETTDRCJ26 or UETTDRCJ06
  • RPL'ed units on trancscript are acceptable
  • Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code
  • The date of completion on the evidence should be recorded as the Issue Date in Pegasus
  • Expiry date = none

Electrical.Statement of Attainment.UETTDRCJ27A – Install and maintain de-energised high voltage underground polymeric cables
  • Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.

Accepted form/s of evidence:

  1. Tafe issued certificate or transcript displaying '7793BS - Cable jointing 1 - LV Polymeric' and '7793BT - Cable jointing 2 - HV Polymeric'
  2. Statement of Attainment OR Transcript showing either UETTDRCJ27 or UETTDRCJ07B
  • RPL'ed units on transcript are acceptable
  • Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
  • Statement of Attainment must comply with ASQA Requirements per:

https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements

  • Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

  • The date of completion on the evidence should be recorded as the Issue Date in Pegasus
  • Expiry date = none

Electrical.Statement of Attainment.UETTDRIS55A – Install and maintain low voltage underground services
  • Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.

Accepted form/s of evidence:

  1. Statement of Attainment OR Transcript showing UETTDRIS55A or UETTDRIS55 or UETTDRIS15B 
  1. Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code OR
  2. RTO issued certificate showing completion of Underground Service Mains - Installation (Cat 2)
  3. Energy Australia issued certificate showing completion of Underground Service Installation - Connection & Disconnection Procedures - CA 0002


  • Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

 

  • The date of completion on the evidence should be recorded as the Issue Date in Pegasus
  • Expiry date = none

Electrical.Statement of Attainment.UETTDRIS56A – Install and maintain low voltage overhead services
  • Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.

Accepted form/s of evidence:

  1. Statement of Attainment OR Transcript showing UETTDRIS56 OR UETTDRIS16B

2. Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

3. RTO issued certificate or transcript showing completion of Overhead Service Mains - Installation (Cat 3)


  • Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.
  • The date of completion on the evidence should be recorded as the Issue Date in Pegasus
  • Expiry date = none

Electrical.Qualified.Meet requirements for Class 2D - Metering & Energising Installations
  • Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.

Accepted form/s of evidence:

  • An ASP Authorisation card showing 2D is accepted providing it is still current and has been issued by an NSW distribution network operator (Ausgrid, Essential Energy or Endeavour Energy) OR
  • Energy Australia issued certificate showing completion of Metering and Energising New Electrical Installations - 100A. CA 0004
  • Documentation which has been found to be subject to alterations will not be accepted.
  • The date of completion on the evidence should be recorded as the Issue Date in Pegasus
  • Expiry date = none

Electrical.Qualified.UEENEEK142A Apply environmentally and sustainable procedures in the energy sector
  • Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.
  • Statement of Attainment OR Transcript showing the relevant unit of competency must be uploaded.
  • RPL'ed units on transcript are acceptable
  • The uploaded evidence must show completion of UEENEEK142A Apply environmentally and sustainable procedures in the energy sector
  • Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.
  • The date of completion on the evidence should be recorded as the Issue Date in Pegasus
  • Expiry date = none

Safety.Qualified. Cat 4 - Metering & Energising
  • Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.

Accepted Form/s of Evidence:

  1. RTO issued Certificate showing completion of Cat 4 - Metering & Energising OR Metering - Cat 4 / Cat 4 - Metering OR CA004
  2. Australian Electricity Supply Industry (ESI) issued skills passport:
  • Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
  • Uploaded document must include page of passport that shows ‘Cat 4 - Metering & Energising’ as having been achieved with:
    • Ausgrid or OR Energy Australia stamp being shown on this page
    • Date of Training
    • Trainer / Assessor Name & Signature


  • Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.
  • Documentation which has been found to be subject to alterations will not be accepted.
  • The date of completion on the evidence should be recorded as the Issue Date in Pegasus
  • Expiry date = none