Page tree
#trackbackRdf

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.



Expand
titleConstruction Induction Card

Anchor
OHSconstructioncard
OHSconstructioncard

Expand
titleGeneric Business Rule


CompetencyCompetency Requirements (Redirection Link)
OH&S-WHS.Induction.Work Safely in the Construction Industry  Click here for a list of national business rules relating to these competencies                 
OH&S-WHS.Induction.Construction ACT
OH&S-WHS.Induction.Construction NSW
OH&S-WHS.Induction.Construction NT
OH&S-WHS.Induction.Construction QLD
OH&S-WHS.Induction.Construction SA
OH&S-WHS.Induction.Construction TAS
OH&S-WHS.Induction.Construction VIC
OH&S-WHS.Induction.Construction WA



Expand
titleONSP Project Specific Business Rule
Anchor
ONSPOHSconstructioncard
ONSPOHSconstructioncard


CompetencyCompetency RequirementsUpload Requirements
OH&S-WHS.Induction.Work Safely in the Construction Industry
  • Only Construction Induction cards completed through classroom training are to be accepted.
  • No white cards completed by online training providers will be accepted.
  • Name on card to match the applicants registered name in Onsite
  • OHS Construction Induction to be listed
  • Only the front side of this card is required to be uploaded.
  • To be issued by the relevant / matching state authority:To be issued by the relevant / matching state authority:Workcover/ Safework / Worksafe NSW
  • Black and white or colour copies accepted
  • Pegasus Staff MUST review the document against additional business rule information prior to verification which is available HERE
  • Date of Completion to be recorded in Onsite as the Issue Date
  • No expiry is required to be entered.
OH&S-WHS.Induction.Construction ACT
OH&S-WHS.Induction.Construction NSW
OH&S-WHS.Induction.Construction NT
OH&S-WHS.Induction.Construction QLD
OH&S-WHS.Induction.Construction SA
OH&S-WHS.Induction.Construction TAS
OH&S-WHS.Induction.Construction VIC
OH&S-WHS.Induction.Construction WA





Expand
titleCode of Conduct


Expand
titleGeneric Business Rule


CompetencyCompetency RequirementsUpload RequirementsExamples
Anchor
codeofconduct
codeofconduct
Generic.Induction.Code of Conduct - signed off
  • The applicants name shown on this paperwork needs to match the applicants registered name in Onsite
  • Employee Conduct to be listed as complete on induction paperwork
  • Paperwork required is certificate of completion evidence issued by Lendlease
  • Either black and white or colour copies of certification is accepted
  • The issue date in Onsite should be recorded as the date of completion shown on the paperwork
  • The expiry date in Onsite should be recorded as the date which is calculated to be 12 months from the issue date






Expand
titleTelstra Project


CompetencyCompetency RequirementsUpload RequirementsExamples
Anchor
codeofconduct
codeofconduct
Generic.Induction.Code of Conduct - signed off
  • The applicants name shown on this paperwork needs to match the applicants registered name in Onsite
  • Employee Conduct to be listed as complete on induction paperwork
  • Paperwork required is certificate of completion evidence issued by Lendlease
  • Either black and white or colour copies of certification is accepted
  • The issue date in Onsite should be recorded as the date of completion shown on the paperwork
  • The expiry date in Onsite should be recorded as the date which is calculated to be 12 months from the issue date






Expand
titleCriminal Record Checks


Expand
titleMetropolitan Business Rule


CompetencyCompetency RequirementsUpload RequirementsExamples
Anchor
criapproval
criapproval
Site.Access.CRI Approval
  • The applicants name shown on this paperwork needs to match the applicants registered name in Onsite
  • Downloadable template should be complete and uploaded.
    A copy of this form is available HERE
  • Pegasus staff click HERE to check the CRI Approvals Register - Applicant Name on form should match up with an approved applicant line entry on this register
  • The issue date in Onsite should be recorded as the date of CRI Approval shown on the CRI approvals register
  • The expiry date in Onsite should be recorded as 12 months from the issue date






Expand
titleEndeavour

Anchor
endeavourinductions
endeavourinductions

CompetencyCompetency RequirementsUpload RequirementsExamples
Company.Induction.Endeavour Energy Safety Rules
  • The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite
  • Endeavour Electrical Safety Rules *NSW Only* to be listed as complete on induction paperwork
  • Either black and white or colour copies of certification is accepted
  • No expiry date is required to be recorded for this competency
  • Record the Issue date within Onsite:

    Completion date - if listed on certificate (this completion date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date




 Company.Induction.Endeavour Energy Authorisation
  • The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite
  • Endeavour Energy Authorisation to be listed as complete on induction paperwork
  • Either black and white or colour copies of certification is accepted

  • Record the Issue date within Onsite:

    Completion date - if listed on certificate (this completion date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

  •  Expiry date should be recorded as the Anniversary date


Company.Induction.EE - Hold Access Authority for Work initial training (0001)

    The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite
    Hold Access Authority for Work initial training (0001) to be listed as complete on induction paperwork
    Either black and white or colour copies of certification is accepted
   

Record the Issue date within Onsite:

    Completion date - if listed on certificate (this completion date is always used when displayed)
    Issue date - If only an issue date is listed please enter this as the issue date

 Expiry date should be recorded as the Anniversary date



Company.Induction.EE - Install Type 5 and 6 metering – Class 2D

    The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite
    Install Type 5 and 6 metering – Class 2D to be listed as complete on induction paperwork
    Either black and white or colour copies of certification is accepted
   

Record the Issue date within Onsite:

    Completion date - if listed on certificate (this completion date is always used when displayed)
    Issue date - If only an issue date is listed please enter this as the issue date

Expiry date should be recorded as the Anniversary date



Company.Induction.EE - Disconnect and Reconnect – Class 2A

    The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite
    Disconnect and Reconnect – Class 2A  to be listed as complete on induction paperwork
    Either black and white or colour copies of certification is accepted
   

Record the Issue date within Onsite:

    Completion date - if listed on certificate (this completion date is always used when displayed)
    Issue date - If only an issue date is listed please enter this as the issue date

 Expiry date should be recorded as the Anniversary date



Company.Induction.EE - Hold Access Authority for Work (Personal Issue)

    The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite
    Hold Access Authority for Work (Personal Issue)  to be listed as complete on induction paperwork
    Either black and white or colour copies of certification is accepted
   

Record the Issue date within Onsite:

    Completion date - if listed on certificate (this completion date is always used when displayed)
    Issue date - If only an issue date is listed please enter this as the issue date

 Expiry date should be recorded as the Anniversary date



Company.Induction.EE - Authorisation to Observe Excavation Work Near the Network

    The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite
  Authorisation to Observe Excavation Work Near the Network to be listed as complete on induction paperwork
    Either black and white or colour copies of certification is accepted
    

Document (letter or card) must be issued by Endeavour Energy, Must be stating the level of authorisation and anniversary date

OR

Letter or card showing

  • Carry out excavation work near Network

Record the Issue date within Onsite:

    Completion date - if listed on certificate (this completion date is always used when displayed)
    Issue date - If only an issue date is listed please enter this as the issue date

 Expiry date should be recorded as the Anniversary date



Company.Induction.EE - Authorisation to Carry Out Excavation Work Near the Network

    The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite
   Authorisation to Carry Out Excavation Work Near the Network to be listed as complete on induction paperwork
    Either black and white or colour copies of certification is accepted

Record the Issue date within Onsite:

    Completion date - if listed on certificate (this completion date is always used when displayed)
    Issue date - If only an issue date is listed please enter this as the issue date

 Expiry date should be recorded as the Anniversary date



Company.Induction.EE - Carry out Trade Assistance

    The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite
  Carry out Trade Assistance to be listed as complete on induction paperwork
    Either black and white or colour copies of certification is accepted
   


Record the Issue date within Onsite:

    Completion date - if listed on certificate (this completion date is always used when displayed)
    Issue date - If only an issue date is listed please enter this as the issue date

Expiry date should be recorded as the Anniversary date



Company.Induction.EE - Carry out trade assistance functions (Ground)

    The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite
  Carry out trade assistance functions (Ground)  to be listed as complete on induction paperwork
    Either black and white or colour copies of certification is accepted
   

Document (letter or card) must be issued by Endeavour Energy, Must be stating the level of authorisation and anniversary date

OR

Letter or card showing "

  • Carry out electrical testing and inspection (Overhead)
  • Inspect and Accept Electricity Network Assets Construct & Maintain Under Ground Mains - Distribution
  • Construct & Maintain Under Ground Mains - Transmission
  • Construct & Maintain Overhead Mains - Distribution
  • Construct & Maintain Overhead Mains - Transmission
  • Construct & Maintain Overhead Mains - Transmission Tower
  • Construct & Maintain Distribution Substation Equipment and Connection Work
  • Construct, Maintain & Test Secondary Systems
  • Construct, Maintain & Test Primary Substation Equipment
  • Install, Maintain and Test Communications Equipment on or Near the Network (Ground)
  • Install, Maintain and Test Communications Equipment on or Near the Network (Overhead)

Record the Issue date within Onsite:
 
    

Expiry date should be recorded as the Anniversary date



Company.Induction.EE - Carry out trade assistance functions (OH)

    The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite
   Carry out trade assistance functions (OH) to be listed as complete on induction paperwork
    Either black and white or colour copies of certification is accepted
   

Document (letter or card) must be issued by Endeavour Energy, Must be stating the level of authorisation and anniversary date

OR

Letter or Card showing one of the below

  • Inspect and Accept Electricity Network Assets Construct & Maintain Under Ground Mains - Distribution
  • Construct & Maintain Under Ground Mains - Transmission
  • Construct & Maintain Overhead Mains - Distribution
  • Construct & Maintain Overhead Mains - Transmission
  • Construct & Maintain Overhead Mains - Transmission Tower
  • Construct & Maintain Distribution Substation Equipment and Connection Work
  • Construct, Maintain & Test Secondary Systems
  • Construct, Maintain & Test Primary Substation Equipment
  • Install, Maintain and Test Communications Equipment on or Near the Network (Ground)
  • Install, Maintain and Test Communications Equipment on or Near the Network (Overhead)

Record the Issue date within Onsite:
 
    

Expiry date should be recorded as the Anniversary date



Company.Induction.EE - Construct and maintain OH mains - Distribution

    The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite
  Construct and maintain OH mains - Distribution to be listed as complete on induction paperwork
    Either black and white or colour copies of certification is accepted
   

Record the Issue date within Onsite:

    Completion date - if listed on certificate (this completion date is always used when displayed)
    Issue date - If only an issue date is listed please enter this as the issue date

Expiry date should be recorded as the Anniversary date



Company.Induction.EE - Construct and maintain UG mains - Distribution

    The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite
  EE - Construct and maintain UG mains - Distribution to be listed as complete on induction paperwork
    Either black and white or colour copies of certification is accepted
   

Record the Issue date within Onsite:

    Completion date - if listed on certificate (this completion date is always used when displayed)
    Issue date - If only an issue date is listed please enter this as the issue date

Expiry date should be recorded as the Anniversary date



 Company.Induction.EE- Operate to Observe Plant Near Overhead (OH) Electrical Apparatus

 Applicants name to be shown on document and match the applicants name registered name in onsite

Document (letter or card ) must be issued by Endeavour Energy and must state the Level of authorisation and anniversary date.

OR

Letter or Card showing one of the below

  • Construct & Maintain Overhead Mains - Distribution
  • Construct & Maintain Overhead Mains - Transmission
  • Construct & Maintain Overhead Mains - Transmission Tower
  • Construct & Maintain Distribution Substation Equipment and Connection Work
  • Construct, Maintain & Test Secondary Systems
  • Construct, Maintain & Test Primary Substation Equipment
  • Install, Maintain and Test Communications Equipment on or Near the Network (Ground)
  • Install, Maintain and Test Communications Equipment on or Near the Network (Overhead)
 

Record the Issue date within Onsite:       

Expiry date should be recorded as the Anniversary date





Expand
titleEssential Energy

Anchor
essentialenergy
essentialenergy

CompetencyCompetency RequirementsUpload RequirementsExamples
Company.Induction.Essential Energy Safety Rules
  • The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite
  • Essential Energy Safety Rules to be listed as complete on induction paperwork
  • Must be issued by Essential Energy or and RTO
  • Either black and white or colour copies of certification is accepted
  • No expiry date is required to be recorded for this competency
  • Record the Issue date within Onsite:

    Completion date - if listed on certificate (this completion date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date



Company.Induction.Essential Energy Authorisation
  • The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite
  • Essential Energy Authorisation to be listed as complete on induction paperwork
  • Must be issued by Essential Energy
  • Either black and white or colour copies of certification is accepted
  • No expiry date is required to be recorded for this competency
  • Record the Issue date within Onsite:

    Completion date - if listed on certificate (this completion date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date




















































Expand
titleInhouse Training


CompetencyCompetency RequirementsUpload RequirementsExamples
Anchor
culturalawareness
culturalawareness
Inhouse.Trained.Cultural Awareness
  • Name on Attendance List must match the name registered in system
  • Statement of Attendance or Copy of Attendance List
  • Issue Date = Attendance Date



 Inhouse.Course.LLE.Engineering Management Systems 
  • Name on Attendance List must match the name registered in system
  • Statement of Attendance or Copy of Attendance List
 Issue Date = Attendance Date
 Inhouse.Course.LLE.Introduction to Earthworks 
  • Name on Attendance List must match the name registered in system
  • Statement of Attendance or Copy of Attendance List
  Issue Date = Attendance Date
 Inhouse.Course.LLE.Lead Auditor Training 
  • Name on Attendance List must match the name registered in system
  • Statement of Attendance or Copy of Attendance List
  Issue Date = Attendance Date
 Inhouse.Course.LLE.Product Quality Risk Management 
  • Name on Attendance List must match the name registered in system
  • Statement of Attendance or Copy of Attendance List
   Issue Date = Attendance Date



Expand
titleDefence Induction


Expand
titleGarden Island


CompetencyCompetency RequirementsUpload RequirementsExamples
Anchor
gardenislanddefenceinduction
gardenislanddefenceinduction
Site.Induction.Garden Island Defence Induction

Name must match the applicants,

Must show completion of the base induction for HMAS Kuttabul

http://www.defence.gov.au/bases/nsw/hmas-kuttabul/ 

  • Issue Date = listed on the email




Expand
titleEngage and Influence


CompetencyCompetency RequirementsUpload RequirementsExamples
Anchor
engageandinfluence
engageandinfluence
OH&S-WHS.Statement of Attendance.LLE - Engage & Influence
  • Name of document to match name registered in system
  • Statement of Attendance / Completion
  • Must contain the name of the Training organisation
  • Black and white or colour accepted
  • Issue Date = Attendance Date





Expand
titleGMR Stream 5


Expand
titleGeneric Business Rule

Anchor
stream5
stream5

CompetencyCompetency RequirementsUpload RequirementsExamples

Site.Induction.Lendlease GMR Passport – Stream 5


This induction is currently hosted by Lendlease and can be found by clicking here

Note: You will be taken to an online learning platform where you will select “register” to create each worker profile (login and password) for individual access to the Lendlease Learning Management System. Once each worker has been added they will receive an email with their details to login and complete each induction.

Helpful Tips: Lendlease recommends using the Google Chrome internet browser to complete this induction. For further information and to download the Lendlease GMR Toolkit for external online learners please click here


  • The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite
  • Stream 5 or higher (Such as Stream 4, Stream 3, Stream 2 or Stream 1) to be listed as complete on induction paperwork

  • Either black and white or colour copies of certification is accepted
  • No expiry date is required to be recorded for this competency
  • A screenshot of the certificate CAN be accepted in lieu of scanned copy of document
  • Screenshot of GMR training taken via Learning Link can be accepted (See example document 2)

Pegasus staff CLICK HERE to read additional business rule information prior to file verification

The issue date in Onsite should be recorded as the date of completion shown on the induction paperwork




Expand
titleNortham Solar Project Specific Business Rule


CompetencyCompetency RequirementsUpload RequirementsExamples

Site.Induction.GMR 4 - Stream 5 - Passport




  • The Lendlease GMR Stream 5  is for contractor employees and direct blue collar hire and those with no access to Lendlease Learning Link.
  • The corporate/white collar/Management/Supervisory staff equivalent is the GMR passport which includes GMR stream 5.  
  • As a rule Northam Solar farm will accept the attached as evidence of GMR passport completion for white collar professionals.

  • This is accessed through Learning Link for Lendlease Management and direct employees. All modules must be completed.

  • ·      The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite
  • ·         GMR Passport to be listed as complete on induction paperwork
  • ·         Either black and white or colour copies of certification is accepted
  • No expiry date is required to be recorded for this competency
  • The issue date in Onsite should be recorded as the date of completion shown on the induction paperwork




Expand
titleProject / Generic


Generic.Induction.Working In Network Sites



  • The applicants name shown on this statement of completion needs to match the applicants registered name in Onsite
  • Working in Network Sites to be listed as complete on statement of completion
  • Either black and white or colour copies of certification is accepted
  • No expiry date is required to be recorded for this competency
The issue date in Onsite should be recorded as the date of completion shown on the statement of completion
Anchor
nbnhseawareness
nbnhseawareness
Project.Statement of Attainment.Completed NBN Enable Account
The applicant’s name on enAble needs to match the applicant’s registered name in Onsite

Screenshot of the enAble profile should be provided as such that it confirms the employee's name, enAble ID and the 2x compulsory online trainings are completed (refer to the attached images).These screenshots can be arranged from their profile either: 



Home page > Accreditation > Online training > View all details or

Home page > Accreditation > table under enAble™ card creation

nbn - Health, Safety and Environment (HSE) Awareness         Completed: Passed (100%)

nbn - Your Role in Connecting Australia                                    Completed: Passed (100%)


OR


EnAble card is also accepted for this competency requirement as long as BOTH the front & back sides of the enAble card are uploaded



  • The issue date in Onsite should be recorded as the date of completion shown on the induction paperwork or online training date listed
  • No expiry date is required to be recorded for this competency

Anchor
nbnutilitystrikes
nbnutilitystrikes
Electrical Trained Avoiding Utility Strikes(NBN EnAble profile)

The applicants name on the enable needs to match the applicants registered name in onsite

Evidence to be provided is a screenshot from the individuals enable profile showing 'Avoiding Utility Strikes' marked as Completed: Passed (100%).  

*   This screenshot can be obtained from under "Accreditations' in an individual's enAble profile.

 
  • The issue date in Onsite should be recorded as the date of completion shown on the induction paperwork or online training date listed
  • No expiry date is required to be recorded for this competency
 
Lendlease – S Group Induction
  • The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite
  • Certificate of completion OR training attendance sheet can be accepted
  • Induction Workshop to be listed as complete on induction paperwork
  • Either black and white or colour copies of certification is accepted
  • No expiry date is required to be recorded for this competency
  • The issue date in Onsite should be recorded as the date of completion shown on the induction paperwork

Lendlease - S Frontline Leader Induction
  • The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite
  • Certificate of completion can be accepted
  • Introduction to leadership at Lendlease to be listed OR Front line leadership induction as complete on induction paperwork
  • Either black and white or colour copies of certification is accepted
  • No expiry date is required to be recorded for this competency
  • The issue date in Onsite should be recorded as the date of completion shown on the induction paperwork
Anchor
telco
telco
Project.Certificate.Telco EDP Permit Requestor Certificate
  • The applicants name shown on this paperwork needs to match the applicants registered name in Onsite

  •  Either black and white or colour copies of certification is accepted
  • No expiry date is required to be recorded for this competency
The issue date in Onsite should be recorded as the date of completion shown on the induction paperwork
Anchor
gmr
gmr
Generic.Induction.GMR Passport
  • The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite
  • GMR Passport to be listed as complete on induction paperwork
  • Either black and white or colour copies of certification is accepted
  • No expiry date is required to be recorded for this competency

  • The issue date in Onsite should be recorded as the date of completion shown on the induction paperwork

Anchor
southeastinduction
southeastinduction
Site.Induction.South East Water Induction and Living Safely Rules


Business Rule last updated 28.8.18

  • That the name on the certificate is the same or shortened version ie Andy for Andrew as the ID name
  • South East Water logo to be included
  • Living Safely Rules to be listed
  • Front and back of the card to be provided
  • Induction Card ID number to be included
  • box Box in the checklist at the bottom 'SEW Induction & Living Safely Rules' needs to be ticked.

Issue Date not required

Expiry Date - As listed on the induction card

Anchor
exxonmobilinduction
exxonmobilinduction
Site.Induction.Exxon Mobil Induction
  • Name on ticket/ Training register sheet to match the person registered (However shortened first names such as 'Chris' for 'Christopher' are accepted)
  • Black and white or colour acceptable
  • Must be clearly scanned and legible

  • Issue date to be recorded as the attendance date



Anchor
asiccardmelbourneairport
asiccardmelbourneairport
Site.Induction.ASIC Card Melbourne Airport
  • Name on ticket to match the person registered (However shortened first names such as 'Chris' for 'Christopher' are accepted)
  • Black and white or colour acceptable
  • Must be clearly scanned and legible
Issue date to be recorded
Anchor
vivaparta
vivaparta
Site.Induction.VIVA - Part A
  • Name on ticket to match the person registered (However shortened first names such as 'Chris' for 'Christopher' are accepted)
  • Black and white or colour acceptable
  • Must be clearly scanned and legible

Issue date to be recorded



Anchor
vivapartb
vivapartb
Site.Induction.VIVA -
  • Name on ticket to match the person registered (However shortened first names such as 'Chris' for 'Christopher' are accepted)
  • Black and white or colour acceptable
  • Must be clearly scanned and legible
Issue date to be recorded
Anchor
vivanewportinduction
vivanewportinduction
Site.Induction.VIVA Newport Induction
  • Name on ticket to match the person registered (However shortened first names such as 'Chris' for 'Christopher' are accepted)
  • Black and white or colour acceptable
  • Must be clearly scanned and legible

Issue date to be recorded



Anchor
vivarefineryinduction
vivarefineryinduction
Site.Induction.VIVA Refinery Induction
  • Name on ticket to match the person registered (However shortened first names such as 'Chris' for 'Christopher' are accepted)
  • Black and white or colour acceptable
  • Must be clearly scanned and legible
Issue date to be recorded

Anchor
melbournewaterinduction
melbournewaterinduction
Site.Induction.Melbourne Water Induction
  • Name on ticket to match the person registered (However shortened first names such as 'Chris' for 'Christopher' are accepted)
  • Black and white or colour acceptable
  • Must be clearly scanned and legible
Issue date to be recorded
Anchor
air7000induction
air7000induction
Site.Induction.Air7000 Induction
  • Name on ticket to match the person registered (However shortened first names such as 'Chris' for 'Christopher' are accepted)
  • Black and white or colour acceptable
  • Must be clearly scanned and legible
Issue date to be recorded
Anchor
citywestwaterinduction
citywestwaterinduction
Site.Induction.City West Water Contractor Induction
  • Name on ticket to match the person registered (However shortened first names such as 'Chris' for 'Christopher' are accepted)
  • Black and white or colour acceptable
  • Must be clearly scanned and legible
Issue date to be recorded
Site.Induction.CUB Induction
  • Name on ticket to match the person registered (However shortened first names such as 'Chris' for 'Christopher' are accepted)
  • Black and white or colour acceptable
  • Must be clearly scanned and legible
Issue date to be recorded
  • Name on ticket to match the person registered (However shortened first names such as 'Chris' for 'Christopher' are accepted)
  • Black and white or colour acceptable
  • Must be clearly scanned and legible

Issue date to be recorded


 
Site.Licence.Defence Pass 

 

  • Name on ticket to match the person registered (However shortened first names such as 'Chris' for 'Christopher' are accepted)
  • Black and white or colour acceptable
  • Must be clearly scanned and legible
Expiry to be recorded = 31st of Month/Year on card
Anchor
sydneywater
sydneywater
Contractor.Induction.Sydney Water Contractor Induction Pass
  • Name on ticket to match the person registered (However shortened first names such as 'Chris' for 'Christopher' are accepted)
  • Sydney Water logo to be included
  • Front and back of the card to be provided
  • Authorised representative site to be completed
  • As per the example document checklist at the bottom of form needs to be ticked


Issue Date - As listed on the card

Expiry Date - As listed on the card



Expand
titlePart A and Part B Inductions

Anchor
partapartb
partapartb

Expand
titleNational / Generic Business Rules


CompetencyCompetency RequirementsUpload RequirementsExamples

Anchor
parta
parta
National.Induction.Lendlease Orientation - Part A

This induction is currently hosted by Lendlease and can be found for

 Lendlease Services by clicking here

 Lendlease Building by clicking here

Note: You will be taken to an online learning platform where you will select “register” to create each worker profile (login and password) for individual access to the Lendlease Learning Management System. Once each worker has been added they will receive an email with their details to login and complete each induction.

Helpful Tips: Lendlease recommends using the Google Chrome internet browser to complete this induction. For further information and to download the Lendlease GMR Toolkit for external online learners please click here



 
  • The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite
  • Orientation Part A Building / Services or Engineering to be listed
  • Either black and white or colour copies of certification is accepted
  • NOTE:  Screenshots of Online Training System Completion Results are accepted in lieu of certificate (see example document 2)

  • Pegasus Staff MUST review the document against additional business rule information prior to verification which is available HERE
  • The issue date in Onsite should be recorded as the date of completion shown on the induction paperwork
  • Expiry Date = 3 years from date of completion



Generic. Induction.Lendlease

Induction- Part B



  • The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite
  • Either black and white or colour copy of example doc to be accepted
  • No expiry date is required to be recorded for this competency

  • The issue date in Onsite should be recorded as the date of completion/Todays date as shown on the upload


 

 

Expand
titlePower North Specific Business Rule


CompetencyCompetency RequirementsUpload RequirementsExamples
Site.Induction.Part B- Power North Site Induction


  • The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite
  • Either black and white or colour copy of example doc to be accepted
  • No expiry date is required to be recorded for this competency
  • Pegasus Staff MUST review the document against additional business rule information prior to verification which is available HERE
  • The issue date in Onsite should be recorded as the date of completion/Todays date as shown on the upload
 



Expand
titleNBN Specific Business Rule


CompetencyCompetency RequirementsUpload RequirementsExamples

Project.Induction.Part B - Lendlease NBN Site Induction

  • The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite
  • Either black and white or colour copy of example doc to be accepted
  • No expiry date is required to be recorded for this competency

Letter of Authority issued to workers is also proof of Part B completion  

  • The issue date in Onsite should be recorded as the date of completion/Today's date as shown on the upload
 



Expand
titleONSP Project Specific Business Rule


CompetencyCompetency RequirementsUpload RequirementsExamples

Lendlease ONSP Combined Part A and B Induction

  • Existing workers that have already been inducted will be allowed to upload a certificate that states that they have completed the Lendlease Part A and Part B induction on site.
  • The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite
  • No expiry date is required to be recorded for this competency
  • All new workers will be asked to complete the Lendlease Part A Induction online and upload the certificate upon completion

Link – http://onlinelearning.lendlease.com/building_orientation_part_A

  • The issue date in Onsite should be recorded as the date of completion shown on the induction paperwork
  • Expiry Date = 3 years from date of completion




Expand
titleMates In Construction

Anchor
matesinconstruction
matesinconstruction

CompetencyCompetency RequirementsUpload RequirementsExamples
Building & Construction.Course.Mates In Construction - General Awareness Training
  • Name on Attendance List must match the name registered in system
  • Statement of Attendance or Copy of Attendance List
  • The issue date in Onsite should be recorded as the date of completion shown on the induction paperwork

Building & Construction.Course.Mates In Construction - Connector Training
  • Name on Attendance List must match the name registered in system
  • Statement of Attendance or Copy of Attendance List
  • The issue date in Onsite should be recorded as the date of completion shown on the induction paperwork

Building & Construction.Course.Mates In Construction - Assist Worker Training
  • Name on Attendance List must match the name registered in system
  • Statement of Attendance or Copy of Attendance List
  •  The issue date in Onsite should be recorded as the date of completion shown on the induction paperwork



Expand
titleOperator


CompetencyCompetency RequirementsUpload RequirementsExamples
Anchor
ausgrid
ausgrid
Operator.Induction.AusGrid Electrical Safety Rules *NSW Only*
  • The applicants name shown on this induction Card needs to match the applicants registered name in Onsite
  • AusGrid Electrical Safety Rules *NSW Only* to be listed as complete on induction paperwork
  • Either black and white or colour copies of certification is accepted
  • No expiry date is required to be recorded for this competency
  • The issue date in Onsite should be recorded as the date of completion shown on the induction paperwork
Anchor
endeavour
endeavour
Operator.Induction.Endeavour Electrical Safety Rules *NSW Only*
  • The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite
  • Endeavour Electrical Safety Rules *NSW Only* to be listed as complete on induction paperwork
  • Either black and white or colour copies of certification is accepted
  • No expiry date is required to be recorded for this competency
  • The issue date in Onsite should be recorded as the date of completion shown on the induction paperwork

Anchor
energex
energex
Operator.Induction.Energex Network Induction *QLD Only*
  • The applicants name shown on this induction paperwork needs to match the applicant’s registered name in Onsite
  • Uploaded Energex Network Induction paperwork needs to display the signatory person’s name & signature as well
  • Either black and white or colour copies of certification is accepted
  • 5 years expiry date is required to be recorded for this competency

  • 5 years expiry date is required to be recorded for this competency



·     

Expand
titleSecurity


Expand
titleMetropolitan Remand and Reception Centre Specific Rule


CompetencyCompetency RequirementsUpload RequirementsExamples
Anchor
mrrcsecurityawareness
mrrcsecurityawareness
Security.Awareness.Declaration.Contractors 
  • The applicants name shown on this paperwork needs to match the applicants registered name in Onsite
  • Document needs to be signed and dated by contractor

    Can we please add a hyperlink to the downloadable form where it stipulates available HERE

  • The issue date in Onsite should be recorded as the signed date on the security awareness document
  • No expiry required



 

Expand
titleAusgrid

Anchor
ausgridinductions
ausgridinductions


CompetencyCompetency RequirementsUpload RequirementsExamples

Company.Induction.Ausgrid Network Access Procedures

  • Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:
    • Applicant Name

  • Uploaded document must also include page of passport that shows ‘Network Access procedures’ as having been achieved with:
    • Ausgrid stamp being shown on this page
    • Date of Training
    • Trainer / Assessor Name
    • Signature

  • Ausgrid Certificate of Completion is accepted. It must show:
    • Network Access Procedures
    • Contractors Name
    • Date of completion

Certificate can be issued by and RTO

  • Record the Issue date within Onsite:
  • Completion date - if listed on certificate (this completion date is always used when displayed)
  • Issue date - If only an issue date is listed please enter this as the issue date

Company.Induction.Ausgrid Contractors Induction

  • Applicants name to be shown on documentation
  • Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
  • Document must show completion of the Ausgrid Contractor Induction
  • Document must be issued by Ausgrid

    Issue date = Date of training completion
    Expiry date = 3 years from training completion


Company.Induction.Ausgrid Authorisation

Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:

  • Applicant Name

Uploaded document must also include page of passport that shows ‘Ausgrid Authorisation’ as having been achieved with:

  • Ausgrid stamp being shown on this page
  • Date of Training
  • Trainer / Assessor Name
  • Signature

Ausgrid Certificate of Completion is accepted. It must show:

  • Ausgrid Authorisation
  • Contractors Name
  • Date of completion
  • Record the Issue date within Onsite:
  • Completion date - if listed on certificate (this completion date is always used when displayed)
  • Issue date - If only an issue date is listed please enter this as the issue date

Company.Induction.Ausgrid Environmental Awareness

    Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:

        Applicant Name

    Uploaded document must also include page of passport that shows ‘Environmental’ as having been achieved with:

        Ausgrid stamp being shown on this page

        Date of Training

        Trainer / Assessor Name

        Signature

    Ausgrid Certificate of Completion is accepted. It must show:

        Environmental Management and Sustainability

        Contractors Name

        Date of completion


Certificate can be issued by and RTO

  • Record the Issue date within Onsite:
  • Completion date - if listed on certificate (this completion date is always used when displayed)
  • Issue date - If only an issue date is listed please enter this as the issue date

Company.Induction.Ausgrid Safety Rules   



Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:

        Applicant Name

    Uploaded document must also include page of passport that shows ‘Safety Rules’ as having been achieved with:

        Ausgrid stamp being shown on this page

        Date of Training

        Trainer / Assessor Name

        Signature

    Ausgrid Certificate of Completion is accepted. It must show:

        Ausgrid Safety Rules

        Contractors Name


Certificate can be issued by and RTO

  • Record the Issue date within Onsite:
  • Completion date - if listed on certificate (this completion date is always used when displayed)
  • Issue date - If only an issue date is listed please enter this as the issue date

Company.Induction.Ausgrid SC1100 - Working Near Underground Cables

Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:

  • Applicant Name

Uploaded document must also include page of passport that shows ‘Working Near underground Cables’ as having been achieved with:

  • Ausgrid stamp being shown on this page
  • Date of Training
  • Trainer / Assessor Name
  • Signature

Ausgrid Certificate of Completion is accepted. It must show:

  • Working near underground cables
  • Contractors Name
  • Date of completion
  • No Expiry date required

Company.Induction.Ausgrid - Overhead Earthing & Short Circuiting /Application of OH HV Earth

Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:

  • Applicant Name

Uploaded document must also include page of passport that shows ‘Overhead Earthing & Short Circuiting /Application of OH HV Earth’ as having been achieved with:

  • Ausgrid stamp being shown on this page
  • Date of Training
  • Trainer / Assessor Name
  • Signature

Ausgrid Certificate of Completion is accepted. It must show:

  • Overhead Earthing & Short Circuiting /Application of OH HV Earth
  • Contractors Name
  • Date of completion
  • Record the Issue date within Onsite:
  • Completion date - if listed on certificate (this completion date is always used when displayed)
  • Issue date - If only an issue date is listed please enter this as the issue date

Company.Induction.Ausgrid - Substation entry

Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:

  • Applicant Name

Uploaded document must also include page of passport that shows ‘Substation entryh’ as having been achieved with:

  • Ausgrid stamp being shown on this page
  • Date of Training
  • Trainer / Assessor Name
  • Signature

Ausgrid Certificate of Completion is accepted. It must show:

  • Substation entry
  • Contractors Name
  • Date of completion
  • Record the Issue date within Onsite:
  • Completion date - if listed on certificate (this completion date is always used when displayed)
  • Issue date - If only an issue date is listed please enter this as the issue date

Company.Induction.Ausgrid - Recipient Access Permits

Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:
Applicant Name
Uploaded document must also include page of passport that shows ‘ Recipient Access Permits ’ as having been achieved with:

  • Ausgrid stamp being shown on this page
  • Date of Training
  • Trainer / Assessor Name
  • Signature

Ausgrid Certificate of Completion is accepted. It must show:

  • Recipient Access Permits
  • Contractors Name
  • Date of completion
  • Record the Issue date within Onsite:
  • Completion date - if listed on certificate (this completion date is always used when displayed)
  • Issue date - If only an issue date is listed please enter this as the issue date

Company.Induction.Ausgrid M1429 - Handling Burnt and Burning CCA Wood Poles Training

    Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:
        Applicant Name
    Uploaded document must also include page of passport that shows ‘.Ausgrid M1429 - Handling Burnt and Burning CCA Wood Poles Training’ as having been achieved with:
        Ausgrid stamp being shown on this page
        Date of Training
        Trainer / Assessor Name
        Signature
    Ausgrid Certificate of Completion is accepted. It must show:
        .Ausgrid M1429 - Handling Burnt and Burning CCA Wood Poles Training
        Contractors Name
        Date of completion

Record the Issue date within Onsite:

    Completion date - if listed on certificate (this completion date is always used when displayed)
    Issue date - If only an issue date is listed please enter this as the issue date


Company.Induction.Ausgrid M1425 - Pole inspection & Treatment training

    Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:
        Applicant Name
    Uploaded document must also include page of passport that shows ‘Environmental’ as having been achieved with:
        Ausgrid stamp being shown on this page
        Date of Training
        Trainer / Assessor Name
        Signature
    Ausgrid Certificate of Completion is accepted. It must show:
        Environmental Management and Sustainability
        Contractors Name
        Date of completion

Record the Issue date within Onsite:

    Completion date - if listed on certificate (this completion date is always used when displayed)
    Issue date - If only an issue date is listed please enter this as the issue date