Page History

• Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.
• The uploaded evidence will be a copy of the applicants completed and signed apprenticeship contract
• The evidence must indicate the apprenticeship is / was for Electrician

Please note letter from NSW Government Education- Training Services NSW is accepted 

• Name of applicant to be shown 
• Must show issue and expiry date 

• The date of contract commencement on the evidence should be recorded as the Issue Date in Pegasus
• Expiry date = none

• Issue date= Date of Commencement 
• Expiry date= Full term completion date 

Image Added

• Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.

Accepted Forms of Evidence:

1. Evidence that shows that the applicant was previously authorised with Ausgrid for Category 1 – Disconnect and Reconnect as at the 30 December 2016 WITH either Movement of Point of Attachment training evidence included within the uploaded file OR CAT 3 training in overhead service mains evidence included within the uploaded file.

NOTE: Ausgrid may choose to accept just the Category 1 – Disconnect and Reconnect evidence on its own if the evidence is escalated and found to be subject to grandfathered training

2. An ASP Authorisation card showing classes 2A and 2D that is either valid 1. An ASP Authorisation card showing classes 2A and 2D that is either valid or expired by no more than 6 12 months

This card can be issued by any NSW distribution network operator (Either Ausgrid, Essential Energy or Endeavour Energy).

3. Australian Electricity Supply Industry (ESI) issued skills passport is accepted.

Must include either the cover page of the passport document showing the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant

Uploaded document must include page of passport that shows Category 1 – Disconnect and Reconnect with

• Ausgrid or Energy Australia stamp being shown on this page
• Date of Training
• Trainer / Assessor Name & Signature

• The date of completion on the evidence should be recorded as the Issue Date in Pegasus (ONLY REQUIRED IF THE EVIDENCE SUPPLIED SHOWS AN ISSUE DATE)
• Expiry Date = None

• Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.
• RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
• Recognised Training Institution’s name to be displayed on document.
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
Completion date or
• The date of completion on the evidence should be recorded as the Issue Date in Pegasus (ONLY REQUIRED IF THE EVIDENCE SUPPLIED SHOWS AN ISSUE DATE)
• Expiry Date = None

• • Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.
  • RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
  • Recognised Training Institution’s name to be displayed on document.
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Accepted course code/s: UTE31199
  • No expiry
  • Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

   

  For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

   

  • Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
  Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

• The date of completion on the evidence should be recorded as the Issue Date in Pegasus
• Expiry date = none

Electrical. Certificate III in Electrotechnology Electrician

• • Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.
  • RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
  • Recognised Training Institution’s name to be displayed on document.
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Accepted course code/s: UEE30811 OR UEE30807 OR UTE31199 OR UEE308
    
  • No expiry
  • Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

   

  For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

   

  • Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
  Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

• The date of completion on the evidence should be recorded as the Issue Date in Pegasus
• Expiry date = none

Electrical. Certificate III.

 
• • Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.
  • RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
  • Recognised Training Institution’s name to be displayed on document.
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Accepted
Course Titles
• • course code/
Codes:
• UET30812
• UET30409
• UET30819
• UET30406
• Electricity Supply Industry Cable Jointing (Power Line)
Pegasus Document / Certificate / Number
• • s: UET30612, UET30209, UET30206
    
  • No expiry
  • Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

   

  For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

   

  • Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
  Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

• The date of completion on the evidence should be recorded as the Issue Date in Pegasus
• Expiry date = none

Electrical.

• • Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.
• Must be an electrical contractors licence showing 'Q'.
• Screenshots from websites are not accepted - Must be copy of the Licence
• Must be issued by a relevant Australian state government authority with corresponding logo shown on licence. i.e. NSW Department of Fair Trading Black and white or coloured copy of evidence can be accepted.

• Issue date = none
• Expiry Date = The date of expiration on the evidence

• Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.
• Must be issued by a relevant Australian state government authority with corresponding logo shown on licence. i.e. NSW Department of Fair Trading

Accepted form/s of evidence:

• Must be a copy of an electrical licence showing 'Supervisor Certificate' OR
• Screenshot from onegov.nsw.gov website showing 'Supervisor Certificate'

• • RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
  • Recognised Training Institution’s name to be displayed on document.
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Accepted course code/s: UET30621
    
  • No expiry
  • Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

   

  For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

   

  • Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
  Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

• The date of completion on the evidence should be recorded as the Issue Date in Pegasus
• Expiry date = none

•  Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.
• Statement of Attainment OR Transcript showing the relevant unit of competency must be uploaded.
• RPL'ed units on trancscript are acceptable
• Any Registered Training Organisation (RTO) with this RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
• Statement of Attainment must comply with ASQA Requirements per:
• https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements
• Upon verification; an individual holding an equivalent qualification and/or their scope of registration to deliver training and/or assessment
• Recognised Training Institution’s name to be displayed on document.
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Completion date or issue date must be displayed
• Accepted Course Titles / Codes:
  • UET30812
  • UET30409
  • UET30819
  • UET30406
  • Electricity Supply Industry Cable Jointing (Power Line)
• Pegasus Document / Certificate / Number
• No expiry
• Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

NOTE:  RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details.

NOTE:  Ausgrid will accept Cat 4 - Metering & Energising approved industry training for persons who have been authorised with Ausgrid prior to 31 December 2015.

• The date of completion on the evidence should be recorded as the Issue Date in Pegasus
• Expiry date = none

For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

• Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
• Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

• The date of completion on the evidence should be recorded as the Issue Date in Pegasus
• Expiry date = none

•  Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.

Accepted form/s of evidence:

1. RTO issued statement of attainment or transcript showing completion of: UETTDRIS60A - Install and replace power system energy meters and associated equipment

Statement of Attainment must comply with ASQA Requirements per: https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements

RPL'ed units on transcript are acceptable.

Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

 RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details.

2. RTO issued certificate showing: Cat 4 - Metering & Energising approved industry training for persons who have been authorised with Ausgrid prior to 31 December 2015.

• Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
• Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.
• Documentation which has been found to be subject to alterations will not be accepted.

• The date of completion on the evidence should be recorded as the Issue Date in Pegasus
• Expiry date = none

• Applicants Documentation which has been found to be subject to alterations will not be accepted.
• Must be an electrical contractors licence showing 'Q'.
• Screenshots from websites are not accepted - Must be copy of the Licence
• Must be issued by a relevant Australian state government authority with corresponding logo shown on licence. i.e. NSW Department of Fair Trading Black and white or coloured copy of evidence can be accepted.

• Issue date = none
• Expiry Date = The date of expiration on the evidence

Electrical.Licence.Electrical Supervisors Licence

• Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.
• Must be issued by a relevant Australian state government authority with corresponding logo shown on licence. i.e. NSW Department of Fair Trading

Accepted form/s of evidence:

• Must be a copy of an electrical licence showing 'Supervisor Certificate' OR
• Screenshot from onegov.nsw.gov.au website showing 'Supervisor Certificate'

• Issue date = none
• Expiry Date = The date of expiration on the evidence

• Applicant’s name should be displayed on the evidence and should match the applicant applicant’s name that 's is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.

Accepted form/s of evidence:

1. Tafe issued certificate displaying 'Underground Service Mains – Installation (Cat 2) Code – 31755’
2. Tafe issued certificate or transcript displaying '7793BS - Cable jointing 1 - LV Polymeric' and '7793BT - Cable jointing 2 - HV Polymeric'
   
3. Statement of Attainment or transcript showing the relevant unit of competency must be uploaded

• RPL'ed units on trancscript are acceptable
• Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

• Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
• Statement of Attainment must comply with ASQA Requirements per:
• https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements
• Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

• The date of completion on the evidence should be recorded as the Issue Date in Pegasus
• Expiry date = none

• Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.
• Statement of Attainment OR Transcript showing the relevant unit of competency must be uploaded.
• Accepted Unit Code/s or Course Wording:
  • UETTDRCJ22A – Install and maintain de-energised low voltage underground paper insulated cables
  • UETTDRCJ22 - Install and maintain de-energised low voltage underground paper insulated cables
  • UETTDRCJ02B - Install and maintain de-energised LV underground paper insulated cables.
  • UTTNTD307A - 'Install and maintain underground paper-lead cables'
• RPL'ed units on trancscript are acceptable
• Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
• Statement of Attainment must comply with ASQA Requirements per:
• https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements
• Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

 NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

• The date of completion on the evidence should be recorded as the Issue Date in Pegasus
• Expiry date = none

• Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.
• Statement of Attainment OR Transcript showing the relevant unit of competency must be uploaded.
• RPL'ed units on trancscript are acceptable
• Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
• Statement of Attainment must comply with ASQA Requirements per:
• https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements
• Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

• The date of completion on the evidence should be recorded as the Issue Date in Pegasus
• Expiry date = none

• Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.

Accepted form/s of evidence:

1. Tafe issued certificate displaying 'Underground Service Mains – Installation (Cat 2) Code – 31755’
   
2. Tafe issued certificate or transcript displaying '7793BS - Cable jointing 1 - LV Polymeric' and '7793BT - Cable jointing 2 - HV Polymeric'
3. Statement of Attainment or transcript showing either UETTDRCJ26 or UETTDRCJ06

• RPL'ed units on trancscript are acceptable
• Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

• Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
• Statement of Attainment must comply with ASQA Requirements per:
• https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements
• Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

• The date of completion on the evidence should be recorded as the Issue Date in Pegasus
• Expiry date = none

• Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.

Accepted form/s of evidence:

1. Tafe issued certificate or transcript displaying '7793BS - Cable jointing 1 - LV Polymeric' and '7793BT - Cable jointing 2 - HV Polymeric'
2. Statement of Attainment OR Transcript showing either UETTDRCJ27 or UETTDRCJ07B
   

• RPL'ed units on transcript are acceptable
• Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
• Statement of Attainment must comply with ASQA Requirements per:

https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements

• Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

• The date of completion on the evidence should be recorded as the Issue Date in Pegasus
• Expiry date = none

• Applicants
• RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
• Recognised Training Institution’s name to be displayed on document.
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this
• Completion date or issue date must be displayed
• Accepted Course Titles / Codes:
• UEEEL0013
• UEENEEG171A
• UEENEEG071C
• UEENEEG071B
• UEEEL0078
• No expiry
• Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements

 For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

• Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
• Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

• The date of completion on the evidence should be recorded as the Issue Date in Pegasus

  Expiry date = none

• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.
• RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
• Recognised Training Institution’s name to be displayed on document.
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Completion date or issue date must be displayed
• Accepted Course Titles / Codes:
• UETDRIS014
• UETTDRIS60
• UETTDRIS60A
• UETTDRIS20B
• UETTDRIS20A
• No expiry
• Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

 For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

• Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
• Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

• The date of completion on the evidence should be recorded as the Issue Date in Pegasus
• Expiry date = none

• Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.
• RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
• Recognised Training Institution’s name to be displayed on document.
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Completion date or issue date must be displayed
• Accepted Course Titles / Codes:
• UETTDRCJ01A - Lay electrical cables
• UETTDRCJ01B - Lay electrical cables
• UETTDRCJ21A - Lay ESI electrical cables
• UETTDRCJ21 - Lay ESI electrical cables
• UETDRDU016 - Lay power cables
• Pegasus Document / Certificate / Number
• No expiry
• Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

 For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

• Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;

Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

• The date of completion on the evidence should be recorded as the Issue Date in Pegasus
• Expiry date = none

• Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.
• RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
• Recognised Training Institution’s name to be displayed on document.
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Completion date or issue date must be displayed
• Accepted Course Titles / Codes:
• UETDRDU014
• UETTDRCJ22
• UETTDRCJ22A
• UETTDRCJ02B
• UETTDRCJ02A
• UTTNTD307A
• Pegasus Document / Certificate / Number
• No expiry
• Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

 For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

• Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;

Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

• The date of completion on the evidence should be recorded as the Issue Date in Pegasus
• Expiry date = none

• Applicant’s name should be displayed on the evidence and should match the applicant applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.

Accepted form/s of evidence:

1. Statement of Attainment OR Transcript showing UETTDRIS55A or UETTDRIS55 or UETTDRIS15B 

• RPL'ed units on transcript are acceptable
• Must be issued by Registered Training Organisation (RTO). RTO registration must have been current at the time of training completion / awarding the document.
• Statement of Attainment must comply with ASQA Requirements per: https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements OR

1. Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code OR
2. RTO issued certificate showing completion of Underground Service Mains - Installation (Cat 2)
3. Energy Australia issued certificate showing completion of Underground Service Installation - Connection & Disconnection Procedures - CA 0002

• Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

• RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
• Recognised Training Institution’s name to be displayed on document.
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Completion date or issue date must be displayed
• Accepted Course Titles / Codes:
• UETDRDU012
• UETTDRCJ23
• UETTDRCJ23A
• UETTDRCJ03B
• UETTDRCJ03A
• No expiry
• Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

 For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

• Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;

Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

• The date of completion on the evidence should be recorded as the Issue Date in Pegasus

  Expiry date = none

Image Removed

Image Removed

Image Removed

Electrical.Statement of Attainment.

Joint, terminate and maintain

high voltage underground polymeric cable

• • Applicant’s name should be displayed on the evidence and should match the
  applicant The date of
  • applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.

Accepted form/s of evidence:

1. Statement of Attainment OR Transcript showing UETTDRIS56 OR UETTDRIS16B

• RPL'ed units on transcript are acceptable
• Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
• Statement of Attainment must comply with ASQA Requirements per:
• https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements

2. Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

3. RTO issued certificate or transcript showing completion of Overhead Service Mains - Installation (Cat 3)

• Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

• • RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
  • Recognised Training Institution’s name to be displayed on document.
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Accepted Course Titles / Codes:
  • UETDRDU013
  • UETTDRCJ27
  • UETTDRCJ27A
  • UETTDRCJ07B
  • UETTDRCJ07A
  • Tafe issued certificate or transcript displaying '7793BS - Cable jointing 1 - LV Polymeric' and '7793BT - Cable jointing 2 - HV Polymeric'
  • No expiry
  • Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

   For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

  • Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
  Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Expiry date = none

Electrical.

Statement of Attainment. Joint, terminate and maintain low voltage underground polymeric cable

• • Applicant’s name should be displayed on the evidence and should match the

• Documentation which
  • applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.

Accepted form/s of evidence:

• An ASP Authorisation card showing 2D is accepted providing it is still current and has been issued by an NSW distribution network operator (Ausgrid, Essential Energy or Endeavour Energy) OR
  
• Energy Australia issued certificate showing completion of Metering and Energising New Electrical Installations - 100A. CA 0004

• Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.

Accepted Form/s of Evidence:

1. RTO issued Certificate showing completion of Cat 4 - Metering & Energising OR Metering - Cat 4 / Cat 4 - Metering
   
2. Australian Electricity Supply Industry (ESI) issued skills passport:

• Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
• Uploaded document must include page of passport that shows ‘Cat 4 - Metering & Energising’ as having been achieved with:
  • Ausgrid or Energy Australia stamp being shown on this page
  • Date of Training
  • Trainer / Assessor Name & Signature

• Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.
• Documentation which has been found to be subject to alterations will not be accepted.
  • Documentation which has been found to be subject to alterations will not be accepted.

• The date of completion on the evidence should be recorded as the Issue Date in Pegasus
• Expiry date = none

• Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.
• Statement of Attainment OR Transcript showing the relevant unit of competency must be uploaded.
• RPL'ed units on transcript are acceptable
• The uploaded evidence must show completion of UEENEEK142A Apply environmentally and sustainable procedures in the energy sector
• Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

• The date of completion on the evidence should be recorded as the Issue Date in Pegasus
• Expiry date = none

• • RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
  • Recognised Training Institution’s name to be displayed on document.
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Accepted Course Titles / Codes:
  • UETDRDU015
  • UETTDRCJ26
  • UETTDRCJ26A
  • UETTDRCJ06B
  • UETTDRCJ06A
  • Passport document showing stamp for Underground Services Cat 2
  • Tafe issued certificate displaying 'Underground Service Mains – Installation (Cat 2) Code – 31755’
  • Tafe issued certificate or transcript displaying '7793BS - Cable jointing 1 - LV Polymeric' and '7793BT - Cable jointing 2 - HV Polymeric'
  • No expiry
  • Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

   For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

  • Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
  Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

• The date of completion on the evidence should be recorded as the Issue Date in Pegasus
• Expiry date = none

• •  Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.
  • RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
  • Recognised Training Institution’s name to be displayed on document.
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Accepted Course Titles / Codes:
  • UETDRIS011
  • UETTDRIS55
  • UETTDRIS55A
  • UETTDRIS15B
  • UETTDRIS15A
  • RTO issued certificate showing completion of Underground Service Mains - Installation (Cat 2)
  • Ausgrid OR Energy Australia issued certificate showing completion of Underground Service Installation - Connection & Disconnection Procedures - CA 0002
  • Skills passport showing stamp with indication of completion of Underground Services Cat 2
  • RPL'ed units on transcript are acceptable
  • No expiry
  • Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

   For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

  • Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
  Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

• The date of completion on the evidence should be recorded as the Issue Date in Pegasus

  Expiry date = none

• Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.

Accepted form/s of evidence:

1. Statement of Attainment OR Transcript showing anyone of the following : UETDRIS010, UETTDRIS56, UETTDRIS56A, UETTDRIS16B & UETTDRIS16A

• RPL'ed units on transcript are acceptable
• Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
• Statement of Attainment must comply with ASQA Requirements per:
• https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements

2. Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

3. RTO issued certificate or transcript showing completion of Overhead Service Mains - Installation (Cat 3)

4. Skills passport showing stamp with indication of completion of Overhead Services (Cat 3)

• Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

• The date of completion on the evidence should be recorded as the Issue Date in Pegasus
• Expiry date = none

Accepted form/s of evidence:

• • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.
  • RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
  • Recognised Training Institution’s name to be displayed on document.
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed 
  • No expiry
  • Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

  Accepted form/s of evidence:

  • An ASP Authorisation card showing 2D is acceptable provided it is within 6 months from the expiration date and has been issued by an NSW distribution network operator (Ausgrid, Essential Energy or Endeavour Energy)

  OR

  • Energy Australia or IAC issued certificate or transcript showing completion of:
  1. Metering / Metering and Energising New Electrical Installations - 100A. CA 0004 OR CS 0005

  OR

  • UEERE0001 - Apply environmentally and sustainable procedures in the energy sector¹ AND either
  1. UETDRIS014 - Install and replace energy meters and associated equipment¹; OR
  2. UEEEL0013 - Install, set up and commission interval metering¹ OR

  3. UEEEL0078 - Install and commission whole current electricity meters 

  ¹ Upon verification; an individual holding an equivalent unit of competency will also meet the unit of competency requirements.

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Expiry date = none

• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.
• RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
• Recognised Training Institution’s name to be displayed on document.
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Completion date or issue date must be displayed
• Accepted Course Titles / Codes:
• UEERE0001
• UEENEEK142A
• UEENEEK042A
• No expiry
• Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

 For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

• Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
• Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

• The date of completion on the evidence should be recorded as the Issue Date in Pegasus

  Expiry date = none

• Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.

Accepted Form/s of Evidence:

1. RTO issued Certificate or Transcript showing completion of Cat 4 - Metering / Metering & Energising OR Metering - Cat 4 / Cat 4 - Metering OR CA004
   
2. Australian Electricity Supply Industry (ESI) issued skills passport:
3. Ausgrid issued Certificate of Completion showing Services Metering & Energising Electrical Installations CA 0005 (Categories 1 & 4)

• Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
  
• Uploaded document must include page of passport that shows ‘Cat 4 - Metering/ Metering & Energising’ as having been achieved with:
  • Ausgrid OR Energy Australia stamp being shown on this page
  • Date of Training
  • Trainer / Assessor Name & Signature

• Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.
• Documentation which has been found to be subject to alterations will not be accepted.

• The date of completion on the evidence should be recorded as the Issue Date in Pegasus
• Expiry date = none

• Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.
• RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
• Recognised Training Institution’s name to be displayed on document.
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Completion date or issue date must be displayed
• Accepted Course Titles / Codes:
• UETDREL002
• UETTDREL13
• UETTDREL13A
• UETTDREL03B
• UETTDREL03A
• No expiry
• Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

 For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

• Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
• Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Electrical.Statement of Attainment.Control vegetation in the vicinity of live electrical apparatus from within the tree

•  Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.
• RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
• Recognised Training Institution’s name to be displayed on document.
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Completion date or issue date must be displayed
• Accepted Course Titles / Codes:
• UETDRVC006

·        UETTDRVC21 (Completion date must be prior to 20/09/2022)

·        12-month expiry

• Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

 For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

• Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
• Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Expiry date

to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).