Page History

Image RemovedImage Added

Expand

title	Certificates

OperatorCertificate of Competency.Jarraf operatorRTO Name, National Provider Code / RTO Number & Logo Course code listed on certificate to match the nominated coding and title within Onsite

Name and / or signature of issuer

Document / Certificate / Number

Record the Issue date within Onsite:

Completion date - if listed on certificate (this completion date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Competency Name	Competency Requirements	Upload Requirements
Training.	-.Tower Erection Training	Applicants name to be shown on documentation Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)	We will accept either a certificate or a Attendance Reigster or a Training Report. Recognised Training Organisation name to be displayed on document Certificate will show completion of: Tower Erection Training	Completion date or issue date must be displayed
Operator Excavator.Training.Excavation and Penetration Training	Applicants name to be

Expand

title	Statement of Attainment

Operator.Statement of Attainment.AHCMOM304 - Operate machinery and equipment

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date is not required

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date is not required

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date is not required

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date is not required

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date is not required

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this

Competency

Competency Requirements

Upload Requirements

shown on documentation
Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
We will accept either a certificate or a Attendance Reigster or a Training Report.
Recognised Training Organisation name to be displayed on document
Certificate will show completion of: Excavation and Penetration Training

Completion date or issue date must be displayed

Operator.Certificate of Competency.Jarraf operator

Applicants name to be shown on documentdocumentation
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:Christopher can be accepted)
RTO Name,

Code and Logo

Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date is not required

Operator.Statement of Attainment.Operate a mobile chipper/mulcher or Operate machinery and equipment

Operator Elevated Work Platform.Statement of Attainment.RIIHAN301E - Operate elevating work platform

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence not accepted

Operator.Statement of Attainment.RIIHAN311 - Conduct operations with integrated tool carrier

Operator.Statement of Attainment.RIIMPO205 - Operate roller/compactor

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

Operator.Statement of Attainment.RIIMPO206 - Conduct bulk water truck operations

Operator.Statement of Attainment.RIIMPO315 - Conduct tractor operations

National Provider Code / RTO Number & Logo to be displayed on document
Completion date or issue date must be displayed
Course code to be listed on certificate to match the nominated coding and title within Onsite
Name and / or signature of issuer
Document / Certificate / Number

Record the Issue date within Onsite:

Completion date - if listed on certificate (this completion date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date is not required

Applicants name to be shown on document

Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)

Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo

Units of competency code and name, date completed

Date certificate issued

Expand

title	Licences

Operator.Statement of Attainment.RIIMPO317 - Conduct roller operations

Operator.Statement of Attainment.RIIMPO318 - Conduct civil construction skid steer loader operations

Competency Name

Competency Requirements

Upload Requirements

Example

Operator.Certificate of Competency.Jarraf operator

Applicants name to be shown on documentation
Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
RTO Name, National Provider Code / RTO Number & Logo to be displayed on document
Completion date or issue date must be displayed
Course code to be listed on certificate to match the nominated coding and title within Onsite
Name and / or signature of issuer
Document / Certificate / Number

Record the Issue date within Onsite:

Completion date - if listed on certificate (this completion date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date is not required

Operator.Statement of Attainment.RIIMPO316 - Conduct self-propelled compactor operations

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date is not required

Operator Excavator Licence LE	Name on card to match the person registered Class / Code LE to be listed and matched to competency selection accordingly Black and white or colour acceptable Only the front of this licence is required to be displayed in the file upload as long as all relevant information is shown.	Issue and Expiry date to be recorded within Onsite as reflected on the evidence
Operator Front End Loader Licence LL	Name on card to match the person registered Class / Code LL to be listed and matched to competency selection accordingly Black and white or colour acceptable Only the front of this licence is required to be displayed in the file upload as long as all relevant information is shown.	Issue and Expiry date to be recorded within Onsite as reflected on the evidence
Operator Backhoe Licence LB	Name on card to match the person registered Class / Code LB to be listed and matched to competency selection accordingly Black and white or colour acceptable Only the front of this licence is required to be displayed in the file upload as long as all relevant information is shown.	Issue and Expiry date to be recorded within Onsite as reflected on the evidence
Front End Loader Skid Steer Licence LS	Name on card to match the person registered Class / Code LS to be listed and matched to competency selection accordingly Black and white or colour acceptable Only the front of this licence is required to be displayed in the file upload as long as all relevant information is shown.	Issue and Expiry date to be recorded within Onsite as reflected on the evidence
EWP<11m.Licence Yellow Card. EWPA EWP Operator Licence Yellow Card	Name on Licence to match the person registered Class / Codes VL, SL, BL, TL, TM and/or AB to be listed and match competency selection accordingly Predominantly black and yellow in colour Must be issued by EWPA – Elevating Work Platform Association	Date of training and Expiry date to be recorded within Onsite as reflected on Licence Yellow card

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date is not required

Applicants name to be shown on document

Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)

Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo

Units of competency code and name, date completed

Expand

title	Statement of Attainment

Competency

Alternate or accepted old HRWL

Competency Requirements

Upload Requirements

Example

Operator.Statement of Attainment.Conduct grader operations

LG

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Acceptable forms of evidence:
- OHS card / Plant Operator Card
- Statement of Attainment
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name. Acceptable codes and names are:
  - RIIMPO324 – Conduct civil construction grader operations
  - AHCMOM206 – Conduct Grader operations
  - RIIMPO310 – Conduct Grader operations
  - RIIMPO307 – Conduct wheel grader operations in underground mines

NOTE: Unit of competency code that is shown in competency naming convention must be shown on evidence (if there is one shown) Or any previous superseded equivalent course codes, which are usually indicated by a letter at the end of the code, shown against the mapping of this course on training.gov.au

Date of completion or issue date must be shown
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click

HERE for

HERE for Internal Process on checking RTO’s

Click HERE for Internal Process on acceptance of superseded unit of competency

NOTE: Cards

are

are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency, or industry accepted “LG” or "GS" code, as well as all other necessary information relating to applicant details and RTO details

NOTE:

Temporary

Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date is not required

Image Added

Operator.Statement of Attainment.

RIIMPO319 -

Conduct

backhoe/Date certificate issued

skid steer loader operations

LS

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)

Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date is not required

Operator.Statement of Attainment.RIIMPO320 - Conduct civil construction excavator operations

Operator.Statement of Attainment.RIIMPO321 - Conduct civil construction wheeled front end loader operations

Acceptable forms of evidence:
- OHS card / Plant Operator Card
- Statement of Attainment
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name. Acceptable codes and names are:

RIIMPO318 – Conduct civil construction skid steer loader operations
RIIMPO334 – Conduct skid steer loader operations using attachments
RIIMPO335 – Conduct skid steer loader operations without attachments
CPCCDE3023 – Operate skid steer loaders at ground level on demolition sites
FWPSS00067 – Skid steer loader operator

NOTE: Unit of competency code that is shown in competency naming convention must be shown on evidence (if there is one shown) Or any previous superseded equivalent course codes, which are usually indicated by a letter at the end of the code, shown against the mapping of this course on training.gov.au

Date of completion or issue date must be shown
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

Click HERE for Internal Process on acceptance of superseded unit of competency

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency, or industry accepted “LS” code, as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date is not required

Image Added

Operator.Statement of Attainment.Conduct excavator operations

LE

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Acceptable forms of evidence:
- OHS card / Plant Operator Card
- Statement of Attainment
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name. Acceptable codes and names are:

RIIMPO320 – Conduct civil construction excavator operations
AHCMOM208 – Conduct excavator operations
SIFCBCR015 – operate a backhoe, front-end loader or excavator
RIIMPO301 – Conduct hydraulic excavator operations

NOTE: Unit of competency code that is shown in competency naming convention must be shown on evidence (if there is one shown) Or any previous superseded equivalent course codes, which are usually indicated by a letter at the end of the code, shown against the mapping of this course on training.gov.au

Date of completion or issue date must be shown
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click

HERE for

HERE for Internal Process on checking RTO’s

Click HERE for Internal Process on acceptance of superseded unit of competency

NOTE: Cards

are accepted

are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency, or industry accepted “LE” code, as well as all other necessary information relating to applicant details and RTO details

NOTE:

Temporary

Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date is not required

Image Added

Operator.Statement of Attainment.

RIIMPO322 - Conduct civil construction tracked front end loader operations

Operate roller/compactor

LC

Applicants name to be shown on document
Applicants name on document must match cardholders registered

name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)

Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo

Units of competency code and name, date completed

Date certificate issued

Authorised person

name

or title (does not necessarily need a signature)

Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number

Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date is not required

Operator.Statement of Attainment.RIIMPO323 - Conduct civil construction dozer operations

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date is not required

Operator.Statement of Attainment.RIIMPO324 - Conduct civil construction grader operations

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date is not required

Operator.Statement of Attainment.RIIMPO325 - Conduct civil construction scraper operations

Applicants name to be shown on document

Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)

Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo

Units of competency code and name, date completed

Date certificate issued

(However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Acceptable forms of evidence:
- OHS card / Plant Operator Card
- Statement of Attainment
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name. Acceptable codes and names are:

RIIMPO316 – Conduct self-propelled Compactor operations
RIIMPO205 – Operate roller/compactor
RIIMPO201 – Operate roller/compactor underground

NOTE: Unit of competency code that is shown in competency naming convention must be shown on evidence (if there is one shown) Or any previous superseded equivalent course codes, which are usually indicated by a letter at the end of the code, shown against the mapping of this course on training.gov.au

Date of completion or issue date must be shown
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

Click HERE for Internal Process on acceptance of superseded unit of competency

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency, or industry accepted “LC” or "CS" code, as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date is not required

Image Added

Operator.Statement of Attainment. Drive and manoeuvre trailers

LC

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Acceptable forms of evidence:
- OHS card / Plant Operator Card
- Statement of Attainment
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name. Acceptable codes and names are:

AURTGA001 - Drive and manoeuvre trailers
AURTGA3001 - Drive and manoeuvre trailers
URT337119A - Drive and manoeuvre trailer(s)

NOTE: Unit of competency code that is shown in competency naming convention must be shown on evidence (if there is one shown) Or any previous superseded equivalent course codes, which are usually indicated by a letter at the end of the code, shown against the mapping of this course on training.gov.au

Date of completion or issue date must be shown
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

Click HERE for Internal Process on acceptance of superseded unit of competency

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency, or industry accepted “LC” code, as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date is not required

Image Added

Operator.Statement of Attainment.Conduct roller operations

LR

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Acceptable forms of evidence:
- OHS card / Plant Operator Card
- Statement of Attainment
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name. Acceptable codes and names are:

RIIMPO317 – Conduct roller operations
RIIMPO205 – Operate roller/compactor
RIIMPO201 – Operate roller/compactor underground

NOTE: Unit of competency code that is shown in competency naming convention must be shown on evidence (if there is one shown) Or any previous superseded equivalent course codes, which are usually indicated by a letter at the end of the code, shown against the mapping of this course on training.gov.au

Date of completion or issue date must be shown
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

Click

HERE

HERE for Internal Process on

checking RTO’s

acceptance of superseded unit of competency

NOTE: Cards

are

are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency, or industry accepted “LR” or "RS" code, as well as all other necessary information relating to applicant details and RTO details

NOTE:

Temporary

Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date is not required

Image Added

Anchor

	SOALL
	SOALL

Operator.Statement of Attainment. Conduct Front-end Loader Operations

Operator.Statement of Attainment.RIIMPO321 - Conduct civil construction wheeled front end loader operations

Operator.Statement of Attainment.

RIIMPO326

RIIMPO322 - Conduct civil construction

water cart

tracked front end loader operations

Applicants name to be shown on document

LL	Applicants

name on document must match cardholders registered

name

(However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)

Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date is not required

Operator.Statement of Attainment.RIIMPO336 - Conduct belly dump truck operations

Applicants name to be shown on document

Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)

Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo

Units of competency code and name, date completed

Date certificate issued

to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Acceptable forms of evidence:
- OHS card / Plant Operator Card
- Statement of Attainment
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name. Acceptable codes and names are:

RIIMPO304 – Conduct Wheeled Loader Operations
RIIMPO321 – Conduct Civil Construction Wheeled Front End Loader Operations
RIIMPO322 – Conduct Civil Construction Tracked Front End Loader Operations
AHCMOM207 – Conduct front-End Loader Operations
SIFCBCR015 – Operate a backhoe, front-end loader or excavator
FWPHAR3228 – Operate Loader

NOTE: Unit of competency code that is shown in competency naming convention must be shown on evidence (if there is one shown) Or any previous superseded equivalent course codes, which are usually indicated by a letter at the end of the code, shown against the mapping of this course on training.gov.au

Date of completion or issue date must be shown
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click

HERE for

HERE for Internal Process on checking RTO’s

Click HERE for Internal Process on acceptance of superseded unit of competency

NOTE: Cards

are accepted

are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency, or industry accepted “LE” code, as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date is not required

Operator

Image Added

Competency	Alternate or accepted old HRWL	Competency Requirements	Upload Requirements	Example
Certificate.Statement of Attainment.

RIIMPO337 - Conduct articulated haul truck operations

RIICFW306E - Direct pile driving operations

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher

' is acceptable)

' is acceptable)
Acceptable forms of evidence:
- OHS card / Plant Operator Card
- Statement of Attainment
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name

, date completedDate certificate issued

NOTE: Unit of competency code that is shown in competency naming convention must be shown on evidence (if there is one shown) Or any previous superseded equivalent course codes shown against the mapping of this course on training.gov.au

Date of completion or issue date must be shown
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

Click HERE for Internal Process on

checking RTO’s

acceptance of superseded unit of competency

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary

information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date is not required

Operator.Statement of Attainment.RIIMPO338 - Conduct rigid haul truck operations

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date is not required

Operator.Statement of Attainment.RIIVEH304 - Conduct tip truck operations

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date is not required

information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

Avetta verifiers click here for additional business rule information prior to verification of this competency

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date is not required

Image Added

Operator Forklift.Statement of Attainment.TLILIC0003 - Licence to operate a forklift truck

Anchor

	operatemachinery
	operatemachinery

Operator.Statement of Attainment.AHCMOM304/AHCMOM304A - Operate machinery and equipment

Anchor

	chippermulcher
	chippermulcher

Operator.Statement of Attainment.Operate a mobile chipper/mulcher or Operate machinery and equipment

EWP<11m.Statement of atainment.RIIHAN301 - Operate Elevating Work Platform

Operator Elevated Work Platform.Statement of Attainment.RIIHAN301E - Operate elevating work platform

Anchor

	ewpboom
	ewpboom

Electrical.Statement of Attainment.TLILIC2005 - Licence to operate a boom-type elevating work platform (boom length 11 metres or more)

Operator.Statement of Attainment.RIIHAN311 - Conduct operations with integrated tool carrier

Operator.Statement of Attainment.RIIMPO206 - Conduct bulk water truck operations

Operator Dozer.Statement of Attainment.RIIMPO308F - Conduct tracked dozer operations

Operator Dozer.Statement of Attainment.RIIMPO309F - Conduct wheeled dozer operations

Certificate.Statement of Attainment.RIIMPO312E - Conduct scraper operations

Operator.Statement of Attainment.RIIMPO315 - Conduct tractor operations

Operator.Statement of Attainment.RIIMPO316 - Conduct self-propelled compactor operations

Operator.Statement of Attainment.RIIMPO319 - Conduct backhoe/loader operations

LB

Operator.Statement of Attainment.RIIMPO323 - Conduct civil construction dozer operations

AHCMOM209 accepted

Operator.Statement of Attainment.RIIMPO325 - Conduct civil construction scraper operations

Operator.Statement of Attainment.RIIMPO326 - Conduct civil construction water cart operations

Operator.Statement of Attainment.RIIMPO328 - Conduct continuous bucket trencher operations

Operator.Statement of Attainment.RIIMPO336 - Conduct belly dump truck operations

Operator.Statement of Attainment.RIIMPO337 - Conduct articulated haul truck operations

Operator.Statement of Attainment.RIIMPO338 - Conduct rigid haul truck operations

Operator.Statement of Attainment.RIIVEH304 - Conduct tip truck operations

Operator.Statement of Attainment.RIIHAN305 - Operate a gantry or overhead crane

Operator.Statement of Attainment.AHCMOM216 - Operate side by side utility vehicles

AHCMOM211 accepted

Operator.Statement of Attainment.BCCPO3016B - Conduct dump truck operations

Operator.Statement of Attainment.TLIC0002 - Operate fuel tanker

Operator.Statement of Attainment.RIIMPO206 - Conduct bulk water truck operations

Driver.Statement of Attainment.TLIC2049 Operate heavy vehicle on unsealed roads

Operator Plant.Statement of Attainment.RIIHAN308F - Load and unload plant

Page tree

Versions Compared

Old Version 5

New Version Current

Key