Competency | Competency Requirements | Upload Requirements | Examples |
---|---|---|---|
Electrical.Apprentice.Apprenticeship Training Contract as an Electrician from the Australian Apprenticeship Centre |
Please note letter from NSW Government Education- Training Services NSW is accepted
|
|
|
| |
Electrical.Authorised.Previously authorised with Category 1 – Disconnect and Reconnect as at the 30 December |
2016 |
Accepted Forms of Evidence: 1. An ASP Authorisation card showing classes 2A and 2D that is either valid or expired by no more than 12 months This card can be issued by any NSW distribution network operator (Either Ausgrid, Essential Energy or Endeavour Energy). |
|
| |
Electrical.Certificate III. |
UTE31199 - Electrotechnology Systems Electrician |
|
|
| |
Electrical. Certificate III |
in Electrotechnology Electrician |
|
|
| ||
Electrical. Certificate III. UET30612- Certificate III in ESI -Power Systems - Distribution |
|
|
| |
Electrical. |
Certificate III. |
UET30621- Certificate III in ESI - Distribution Overhead |
|
|
| |
Electrical. |
Certificate III.UET30812 - Certificate III in ESI - Power Systems - Distribution Cable Jointing |
For overseas / international engineering qualifications to be accepted they need to either be recognised under the:
|
|
| |
Electrical. |
- The date of completion on the evidence should be recorded as the Issue Date in Onsite
Licence.Electrical Contractors Licence endorsed with a (Q) |
|
| |
Electrical.Licence.Electrical Supervisors Licence |
Accepted form/s of evidence:
|
| |
Electrical.Statement of Attainment.Install, set up and commission interval metering |
For overseas / international engineering qualifications to be accepted they need to either be recognised under the:
NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code |
|
| |
Electrical.Statement of Attainment. Install and replace |
energy meters and associated equipment |
For overseas / international engineering qualifications to be accepted they need to either be recognised under the:
NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code |
|
| |
Electrical.Statement of Attainment.Lay power cables |
|
For overseas / international engineering qualifications to be accepted they need to either be recognised under the:
Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification |
|
| |
Electrical.Statement of Attainment. |
Joint, terminate and maintain |
low voltage underground paper insulated |
cable |
For overseas / international engineering qualifications to be accepted they need to either be recognised under the:
Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification |
|
| |
Electrical.Statement of Attainment. |
Joint, terminate and maintain |
high voltage underground paper insulated |
cable |
|
For overseas / international engineering qualifications to be accepted they need to either be recognised under the:
Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification |
|
| |
Electrical.Statement of Attainment. |
Joint, terminate and maintain |
high voltage underground polymeric |
cable |
|
| The date of completion on the evidence should be recorded as the Issue Date in |
Pegasus Expiry date = none | |
Electrical.Statement of Attainment |
. Joint, terminate and maintain low voltage underground polymeric cable |
|
|
| ||
Install and maintain low voltage underground services |
|
|
| |
Electrical.Statement of Attainment. |
Install and maintain low voltage overhead services |
|
Accepted form/s of evidence:
2. Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code 3. RTO issued certificate or transcript showing completion of Overhead Service Mains - Installation (Cat 3) 4. Skills passport showing stamp with indication of completion of Overhead Services (Cat 3)
|
| |
Safety.Qualified.Meet requirements for Class 2D - Metering & Energizing Installations | Accepted form/s of evidence:
|
| The date of completion on the evidence should be recorded as the Issue Date in |
Pegasus Expiry date = none | ||
Electrical.Qualified.Apply environmentally and sustainable procedures in the energy sector |
For overseas / international engineering qualifications to be accepted they need to either be recognised under the:
NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code |
|
| ||
Safety.Qualified.Category 4 - Metering & Energizing Installations |
Accepted Form/s of Evidence:
|
|
| |
Electrical.Statement of Attainment |
.Comply with environmental requirements |
For overseas / international engineering qualifications to be accepted they need to either be recognised under the:
| The date of completion on the evidence should be recorded as the Issue Date in |
Pegasus Expiry date = none | |
Electrical.Statement of Attainment. |
Control vegetation in the vicinity of live electrical apparatus from within the tree |
|
· UETTDRVC21 (Completion date must be prior to 20/09/2022) · 12-month expiry
For overseas / international engineering qualifications to be accepted they need to either be recognised under the:
NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code | The date of completion on the evidence should be recorded as the Issue Date in |
Pegasus Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation). |