Competency | Alternate or accepted old HRWL | Competency Requirements | Upload Requirements | Example |
---|
Operator.Statement of Attainment.Conduct grader operations | LG | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Acceptable forms of evidence:
- OHS card / Plant Operator Card
- Statement of Attainment
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name. Acceptable codes and names are:
- RIIMPO324 – Conduct civil construction grader operations
- AHCMOM206 – Conduct Grader operations
- RIIMPO310 – Conduct Grader operations
- RIIMPO307 – Conduct wheel grader operations in underground mines
NOTE: Unit of competency code that is shown in competency naming convention must be shown on evidence (if there is one shown) Or any previous superseded equivalent course codes, which are usually indicated by a letter at the end of the code, shown against the mapping of this course on training.gov.au - Date of completion or issue date must be shown
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s Click HERE for Internal Process on acceptance of superseded unit of competency NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency, or industry accepted “LG” or "GS" code, as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted | - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date - Expiry date is not required
| |
Operator.Statement of Attainment.Conduct skid steer loader operations | LS | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Acceptable forms of evidence:
- OHS card / Plant Operator Card
- Statement of Attainment
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name. Acceptable codes and names are:
- RIIMPO318 – Conduct civil construction skid steer loader operations
- RIIMPO334 – Conduct skid steer loader operations using attachments
- RIIMPO335 – Conduct skid steer loader operations without attachments
- CPCCDE3023 – Operate skid steer loaders at ground level on demolition sites
- FWPSS00067 – Skid steer loader operator
NOTE: Unit of competency code that is shown in competency naming convention must be shown on evidence (if there is one shown) Or any previous superseded equivalent course codes, which are usually indicated by a letter at the end of the code, shown against the mapping of this course on training.gov.au - Date of completion or issue date must be shown
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s Click HERE for Internal Process on acceptance of superseded unit of competency NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency, or industry accepted “LS” code, as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted | - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date - Expiry date is not required
| |
Operator.Statement of Attainment.Conduct excavator operations | LE | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Acceptable forms of evidence:
- OHS card / Plant Operator Card
- Statement of Attainment
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name. Acceptable codes and names are:
- RIIMPO320 – Conduct civil construction excavator operations
- AHCMOM208 – Conduct excavator operations
- SIFCBCR015 – operate a backhoe, front-end loader or excavator
- RIIMPO301 – Conduct hydraulic excavator operations
NOTE: Unit of competency code that is shown in competency naming convention must be shown on evidence (if there is one shown) Or any previous superseded equivalent course codes, which are usually indicated by a letter at the end of the code, shown against the mapping of this course on training.gov.au - Date of completion or issue date must be shown
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s Click HERE for Internal Process on acceptance of superseded unit of competency NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency, or industry accepted “LE” code, as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted | - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date - Expiry date is not required
| |
Operator.Statement of Attainment.Operate roller/compactor | LC | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Acceptable forms of evidence:
- OHS card / Plant Operator Card
- Statement of Attainment
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name. Acceptable codes and names are:
- RIIMPO316 – Conduct self-propelled Compactor operations
- RIIMPO205 – Operate roller/compactor
- RIIMPO201 – Operate roller/compactor underground
NOTE: Unit of competency code that is shown in competency naming convention must be shown on evidence (if there is one shown) Or any previous superseded equivalent course codes, which are usually indicated by a letter at the end of the code, shown against the mapping of this course on training.gov.au - Date of completion or issue date must be shown
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s Click HERE for Internal Process on acceptance of superseded unit of competency NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency, or industry accepted “LC” or "CS" code, as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted | - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date - Expiry date is not required
| |
Operator.Statement of Attainment. Drive and manoeuvre trailers | LC | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Acceptable forms of evidence:
- OHS card / Plant Operator Card
- Statement of Attainment
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name. Acceptable codes and names are:
- AURTGA001 - Drive and manoeuvre trailers
- AURTGA3001 - Drive and manoeuvre trailers
- URT337119A - Drive and manoeuvre trailer(s)
NOTE: Unit of competency code that is shown in competency naming convention must be shown on evidence (if there is one shown) Or any previous superseded equivalent course codes, which are usually indicated by a letter at the end of the code, shown against the mapping of this course on training.gov.au - Date of completion or issue date must be shown
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s Click HERE for Internal Process on acceptance of superseded unit of competency NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency, or industry accepted “LC” code, as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted | - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date - Expiry date is not required
| |
Operator.Statement of Attainment.Conduct roller operations | LR | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Acceptable forms of evidence:
- OHS card / Plant Operator Card
- Statement of Attainment
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name. Acceptable codes and names are:
- RIIMPO317 – Conduct roller operations
- RIIMPO205 – Operate roller/compactor
- RIIMPO201 – Operate roller/compactor underground
NOTE: Unit of competency code that is shown in competency naming convention must be shown on evidence (if there is one shown) Or any previous superseded equivalent course codes, which are usually indicated by a letter at the end of the code, shown against the mapping of this course on training.gov.au - Date of completion or issue date must be shown
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s Click HERE for Internal Process on acceptance of superseded unit of competency NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency, or industry accepted “LR” or "RS" code, as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted | - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date - Expiry date is not required
| |
Operator.Statement of Attainment. Conduct Front-end Loader OperationsOperator.Statement of Attainment.RIIMPO321 - Conduct civil construction wheeled front end loader operations Operator.Statement of Attainment.RIIMPO322 - Conduct civil construction tracked front end loader operations | LL | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Acceptable forms of evidence:
- OHS card / Plant Operator Card
- Statement of Attainment
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name. Acceptable codes and names are:
- RIIMPO304 – Conduct Wheeled Loader Operations
- RIIMPO321 – Conduct Civil Construction Wheeled Front End Loader Operations
- RIIMPO322 – Conduct Civil Construction Tracked Front End Loader Operations
- AHCMOM207 – Conduct front-End Loader Operations
- SIFCBCR015 – Operate a backhoe, front-end loader or excavator
- FWPHAR3228 – Operate Loader
NOTE: Unit of competency code that is shown in competency naming convention must be shown on evidence (if there is one shown) Or any previous superseded equivalent course codes, which are usually indicated by a letter at the end of the code, shown against the mapping of this course on training.gov.au - Date of completion or issue date must be shown
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s Click HERE for Internal Process on acceptance of superseded unit of competency NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency, or industry accepted “LE” code, as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted | - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date - Expiry date is not required
| |