Competency | Competency Requirements | Upload Requirements | Examples |
---|
Electrical.Apprentice.Apprenticeship Training Contract as an Electrician from the Australian Apprenticeship Centre | - Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
- Documentation which has been found to be subject to alterations will not be accepted.
- The uploaded evidence will be a copy of the applicants completed and signed apprenticeship contract
- The evidence must indicate the apprenticeship is / was for Electrician
Please note letter from NSW Government Education- Training Services NSW is accepted - Name of applicant to be shown
- Must show issue and expiry date
| |
completion - contract commencement on the evidence should be recorded as the Issue Date in Pegasus
- Expiry date = none
- Issue date= Date of Commencement
- Expiry date= Full term completion date
| Image Added |
Electrical.Authorised.Previously authorised with Category 1 – Disconnect and Reconnect as at the 30 December 2016 | - Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
- Documentation which has been found to be subject to alterations will not be accepted.
|
The uploaded evidence will show that the applicant was previously authorised with Ausgrid for Category 1 – Disconnect and Reconnect as at the 30 December 2015, for external RTOs, training must include Movement of Point of Attachment.
NOTE: Movement of Point of Attachment training is not required if combined with CAT 3 training in overhead service mains.
- Australian Electricity Supply Industry (ESI) issued skills passport is accepted.
- Uploaded document must include page of passport that shows ‘Category 1 – Disconnect and Reconnect’ as having been achieved prior to 1 January 2016 with:
- Ausgrid stamp being shown on this page
- Date of Training
- Trainer / Assessor Name & Signature
NOTE: An ASP Authorisation card showing class 2A and 2D is accepted in lieu of the above requirements providing it is still current and has been issued by an NSW distribution network operator (Ausgrid, Essential Energy or Endeavour Energy).
- The date of completion on the evidence should be recorded as the Issue Date in Pegasus
- Expiry Date = None
| Electrical.Certificate III.UET30612 - Certificate III in ESI - Power Systems - Distribution Overhead (Linesman) | Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.Documentation which has been found to be subject to alterations will not be accepted.RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration
Accepted Forms of Evidence:
1. An ASP Authorisation card showing classes 2A and 2D that is either valid or expired by no more than 12 months This card can be issued by any NSW distribution network operator (Either Ausgrid, Essential Energy or Endeavour Energy).
| - The date of completion on the evidence should be recorded as the Issue Date in Pegasus (ONLY REQUIRED IF THE EVIDENCE SUPPLIED SHOWS AN ISSUE DATE)
- Expiry Date = None
| |
Electrical.Certificate III.UTE31199 - Electrotechnology Systems Electrician | - Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
- Documentation which has been found to be subject to alterations will not be accepted.
- RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
- Recognised Training Institution’s name to be displayed on document.
- Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
- Completion date or issue date must be displayed
|
.Course title and associated level to be listed on certificate to match the nominated coding and title within Pegasus Document / Certificate / NumberNo expiry.
| - The date of completion on the evidence should be recorded as the Issue Date in Pegasus
- Expiry date = none
| |
Electrical. Certificate III |
. UEE30811 - Certificate III in Electrotechnology Electrician | - Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
- Documentation which has been found to be subject to alterations will not be accepted.
- RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
- Recognised Training Institution’s name to be displayed on document.
- Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
- Completion date or issue date must be displayed
|
Course title and associated level to be listed on certificate to match the nominated coding and title within Pegasus Document / Certificate / Number
| - The date of completion on the evidence should be recorded as the Issue Date in Pegasus
- Expiry date = none
|
|
Electrical. Certificate III. |
UET30812 UET30612- Certificate III in ESI -Power Systems - Distribution |
Cable Jointing - Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
- Documentation which has been found to be subject to alterations will not be accepted.
- RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
- Recognised Training Institution’s name to be displayed on document.
- Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
- Completion date or issue date must be displayed
|
Course title and associated level to be listed on certificate to match the nominated coding and title within Pegasus Document / Certificate / Number
| - The date of completion on the evidence should be recorded as the Issue Date in Pegasus
- Expiry date = none
|
|
Electrical. |
Induction.Ausgrid’s Electrical Safety Rules (ESRs) Certificate III. UET30621- Certificate III in ESI - Distribution Overhead | - Applicants name should be displayed on the evidence and should match the applicant
|
name that- name that's registered in
|
Onsite Electrical.Licence.Electrical Supervisors Licence
Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened - Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
|
The uploaded evidence will show completion of: Ausgrid’s Electrical Safety Rules (ESRs) - The date of completion on the evidence should be recorded as the Issue Date in Pegasus
- Expiry date = none
| Electrical.Licence.Electrical Contractors Licence endorsed with a (Q) | - Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
- Documentation which has been found to be subject to alterations will not be accepted.
- Must be an electrical contractors licence showing 'Q'.
- Screenshots from websites are not accepted - Must be copy of the Licence
- Must be issued by a relevant Australian state government authority with corresponding logo shown on licence. i.e. NSW Department of Fair Trading Black and white or coloured copy of evidence can be accepted.
| - Issue date = none
- Expiry Date = The date of expiration on the evidence
Electrical.Statement of Attainment.UETTDRIS60A - Install and replace power system energy meters and associated equipment | - Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
- Documentation which has been found to be subject to alterations will not be accepted.
- Statement of Attainment showing the relevant unit of competency must be uploaded.
- Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
- Statement of Attainment must comply with ASQA Requirements per:
- https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements
- Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.
NOTE: Ausgrid will accept Cat 4 - Metering & Energising approved industry training for persons who have been authorised with Ausgrid prior to 31 December 2015.
NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details.
NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code
The date of completion on the evidence should be recorded as the
| - The date of completion on the evidence should be recorded as the Issue Date in Pegasus
- Expiry date = none
|
|
Electrical.Certificate III.UET30812 - Certificate III in ESI - Power Systems - Distribution Cable Jointing | - Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
- Documentation which has been found to be subject to alterations will not be accepted.
|
Must be an electrical licence showing 'Supervisor Certificate'.Screenshots from websites are not accepted - Must be copy of the LicenceMust be issued by a relevant Australian state government authority with corresponding logo shown on licence. i.e. NSW Department of Fair Trading- Issue date = none
- Expiry Date = The date of expiration on the evidence
- RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
- Recognised Training Institution’s name to be displayed on document.
- Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
- Completion date or issue date must be displayed
- Accepted Course Titles / Codes:
- UET30812
- UET30409
- UET30819
- UET30406
- Electricity Supply Industry Cable Jointing (Power Line)
- Pegasus Document / Certificate / Number
- No expiry
- Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.
For overseas / international engineering qualifications to be accepted they need to either be recognised under the: | - The date of completion on the evidence should be recorded as the Issue Date in Pegasus
- Expiry date = none
|
|
Electrical. |
Statement of Attainment.UETTDRCJ21A – Lay ESI cables NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code
- The date of completion on the evidence should be recorded as the Issue Date in Pegasus
- Expiry date = none
| Electrical.Statement of Attainment.UETTDRCJ22A – Install and maintain de-energised low voltage underground paper insulated cables | - Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
- Documentation which has been found to be subject to alterations will not be accepted.
- Statement of Attainment showing the relevant unit of competency must be uploaded.
- Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
- Statement of Attainment must comply with ASQA Requirements per:
- https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements
- Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.
NOTE: Temporary Licence.Electrical Contractors Licence endorsed with a (Q) | - Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
- Documentation which has been found to be subject to alterations will not be accepted.
|
Statement of Attainment showing the relevant unit of competency must be uploaded.Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.Statement of Attainment must comply with ASQA Requirements per:https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statementsUpon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.- Must be an electrical contractors licence showing 'Q'.
- Screenshots from websites are not accepted - Must be copy of the Licence
- Must be issued by a relevant Australian state government authority with corresponding logo shown on licence. i.e. NSW Department of Fair Trading Black and white or coloured copy of evidence can be accepted.
| - Issue date = none
- Expiry Date = The date of expiration on the evidence
| |
Electrical.Licence.Electrical Supervisors Licence
| - Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
- Documentation which has been found to be subject to alterations will not be accepted.
- Must be issued by a relevant Australian state government authority with corresponding logo shown on licence. i.e. NSW Department of Fair Trading
Accepted form/s of evidence: - Must be a copy of an electrical licence showing 'Supervisor Certificate' OR
- Screenshot from onegov.nsw.gov.au website showing 'Supervisor Certificate'
| - Issue date = none
- Expiry Date = The date of expiration on the evidence
| |
Electrical.Statement of Attainment.Install, set up and commission interval metering | - Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted
- If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus
- Documentation which has been found to be subject to alterations will not be accepted
- RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
- Recognised Training Institution’s name to be displayed on document.
- Actual copy of certificate / degree is required. Letters are not accepted in lieu of this
- Completion date or issue date must be displayed
- Accepted Course Titles / Codes:
- UEEEL0013
- UEENEEG171A
- UEENEEG071C
- UEENEEG071B
- UEEEL0078
- No expiry
- Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements
For overseas / international engineering qualifications to be accepted they need to either be recognised under the: NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code
| |
|
Electrical.Statement of Attainment. |
UETTDRCJ23A – and maintain de-energised high voltage underground paper insulated cablesApplicants and replace energy meters and associated equipment | - Applicant’s name should be displayed on the evidence and should match the
|
applicant 's - is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
- Documentation which has been found to be subject to alterations will not be accepted.
|
Statement of Attainment showing the relevant unit of competency must be uploaded.Any Registered Training Organisation (RTO) with this - RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on
|
scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.Statement of Attainment must comply with ASQA Requirements per:https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements Upon verification; Electrical.Statement of Attainment.UETTDRIS55A – Install and maintain low voltage underground services | - Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
- Documentation which has been found to be subject to alterations will not be accepted.
- Statement of Attainment showing the relevant unit of competency must be uploaded.
- Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
- Statement of Attainment must comply with ASQA Requirements per:
https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements
- Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.
NOTE- their scope of registration to deliver training and/or assessment
- Recognised Training Institution’s name to be displayed on document.
- Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
- Completion date or issue date must be displayed
- Accepted Course Titles / Codes:
- UETDRIS014
- UETTDRIS60
- UETTDRIS60A
- UETTDRIS20B
- UETTDRIS20A
- No expiry
- Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.
|
NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code
- The date of completion on the evidence should be recorded as the Issue Date in Pegasus
- Expiry date = none
| Electrical.Statement of Attainment.UETTDRCJ26A – Install and maintain de-energised low voltage underground polymeric cables | - Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
- Documentation which has been found to be subject to alterations will not be accepted.
- Statement of Attainment showing the relevant unit of competency must be uploaded.
- Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
- Statement of Attainment must comply with ASQA Requirements per:
https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements - Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.
NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code | - The date of completion on the evidence should be recorded as the Issue Date in Pegasus
- Expiry date = none
| Electrical.Statement of Attainment.UETTDRCJ27A – Install and maintain de-energised high voltage underground polymeric cables | - Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
- Documentation which has been found to be subject to alterations will not be accepted.
- Statement of Attainment showing the relevant unit of competency must be uploaded.
- Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
- Statement of Attainment must comply with ASQA Requirements per:
https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements - Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.
NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code | - The date of completion on the evidence should be recorded as the Issue Date in Pegasus
- Expiry date = none
| Electrical.Statement of Attainment.UETTDREL14 - Working safely near live electrical apparatus as a non electrical worker | - Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
- Documentation which has been found to be subject to alterations will not be accepted.
- Statement of Attainment showing the relevant unit of competency must be uploaded.
- Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
- Statement of Attainment must comply with ASQA Requirements per:
- https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements
- Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.
- Is valid for 12 months from date of completion.
- Must be current.
- Australian Electricity Supply Industry (ESI) issued skills passport is accepted.
- Uploaded document must include page of passport that shows ‘UETTDREL14A - Working safely near live electrical apparatus as a non-electrical worker’ as having been achieved with:
- Ausgrid stamp being shown on this page
- Date of Training
- Trainer / Assessor Name & Signature
NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code | - The date of completion on the evidence should be recorded as the Issue Date in Pegasus
- Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4-week expiry for this documentation).
| Electrical.Statement of Attainment.UETTDREL16 - Working safely near live electrical apparatus | - Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
- Documentation which has been found to be subject to alterations will not be accepted.
- Statement of Attainment showing the relevant unit of competency must be uploaded.
- Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
- Statement of Attainment must comply with ASQA Requirements per:
- https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements
- Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.
- Australian Electricity Supply Industry (ESI) issued skills passport is accepted.
- Uploaded document must include page of passport that shows ‘UETTDREL16A - Working safely near live electrical apparatus’ as having been achieved with:
- Ausgrid stamp being shown on this page
- Date of Training
- Trainer / Assessor Name & Signature
NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code | - The date of completion on the evidence should be recorded as the Issue Date in Pegasus
- Expiry date = none
| For overseas / international engineering qualifications to be accepted they need to either be recognised under the: NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code
| - The date of completion on the evidence should be recorded as the Issue Date in Pegasus
- Expiry date = none
| |
Electrical.Statement of Attainment. |
UETTDRIS56A – Install and maintain low voltage overhead servicesApplicants Lay power cables | - Applicant’s name should be displayed on the evidence and should match the
|
applicant - applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
- Documentation which has been found to be subject
|
to alterations will not be accepted.Statement of Attainment showing the relevant unit of competency must be uploaded.Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.Statement of Attainment must comply with ASQA Requirements per:https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements
- Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.
NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code- to alterations will not be accepted.
- RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
- Recognised Training Institution’s name to be displayed on document.
- Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
- Completion date or issue date must be displayed
- Accepted Course Titles / Codes:
- UETTDRCJ01A - Lay electrical cables
- UETTDRCJ01B - Lay electrical cables
- UETTDRCJ21A - Lay ESI electrical cables
- UETTDRCJ21 - Lay ESI electrical cables
- UETDRDU016 - Lay power cables
- Pegasus Document / Certificate / Number
- No expiry
- Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.
For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification
| - The date of completion on the evidence should be recorded as the Issue Date in Pegasus
- Expiry date = none
| |
Electrical.Statement of Attainment. |
UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work- Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
- Documentation which has been found to be subject to alterations will not be accepted.
- Statement of Attainment showing the relevant unit of competency must be uploaded.
- Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
- Statement of Attainment must comply with ASQA Requirements per:
- https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements
- Is valid for 12 months from date of completion.
- Must be current.
- Australian Electricity Supply Industry (ESI) issued skills passport is accepted.
- Uploaded document must include page of passport that shows ‘UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work’ as having been achieved with:
- Ausgrid stamp being shown on this page
- Date of Training
- Trainer / Assessor Name & Signature
- Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid aligned version of ‘UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work’ has been completed.
NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details
NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code.
NOTE: All ASP1s - Ausgrid’s Electrical Safety Rules (ESRs) training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised.
NOTE: All ASP2s must complete their initial Ausgrid Electrical Safety Rules (ESR) training with Ausgrid’s Training Group. After the initial training the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned training.Joint, terminate and maintain low voltage underground paper insulated cable | - Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
- Documentation which has been found to be subject to alterations will not be accepted.
- RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
- Recognised Training Institution’s name to be displayed on document.
- Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
- Completion date or issue date must be displayed
- Accepted Course Titles / Codes:
- UETDRDU014
- UETTDRCJ22
- UETTDRCJ22A
- UETTDRCJ02B
- UETTDRCJ02A
- UTTNTD307A
- Pegasus Document / Certificate / Number
- No expiry
- Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.
For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification
| - The date of completion on the evidence should be recorded as the Issue Date in Pegasus
- Expiry date = none
|
|
Electrical.Statement of Attainment.Joint, terminate and maintain high voltage underground paper insulated cable | - Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
- Documentation which has been found to be subject to alterations will not be accepted.
- RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
- Recognised Training Institution’s name to be displayed on document.
- Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
- Completion date or issue date must be displayed
- Accepted Course Titles / Codes:
- UETDRDU012
- UETTDRCJ23
- UETTDRCJ23A
- UETTDRCJ03B
- UETTDRCJ03A
- No expiry
- Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.
For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification
| |
as the Issue Date in PegasusExpiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4-week expiry for this documentation). |
|
Electrical.Statement of Attainment. |
UETTDRRF02 - Perform Pole Top Rescue Applicants Joint, terminate and maintain high voltage underground polymeric cable | - Applicant’s name should be displayed on the evidence and should match the
|
applicant - applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
- Documentation which has
|
been found to be subject to alterations will not be accepted.Statement of Attainment showing the relevant unit of competency must be uploaded.Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.Statement of Attainment must comply with ASQA Requirements per:https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.Is valid for 12 months from date of completion.Must be current.Australian Electricity Supply Industry (ESI) issued skills passport is accepted.Uploaded document must include page of passport that shows ‘UETTDRRF02 - Perform Pole Top Rescue' as having been achieved with:- Ausgrid stamp being shown on this page
- Date of Training
- Trainer / Assessor Name & Signature
NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details
NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code | The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry |
date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4-week expiry for this documentation).Applicants date = none |
|
Electrical.Statement of Attainment. |
UETTDRRF03 - Perform EWP rescueJoint, terminate and maintain low voltage underground polymeric cable | - Applicant’s name should be displayed on the evidence and should match the
|
applicant - applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
- Documentation which has been found to be subject to alterations will not be accepted.
|
Statement of Attainment showing the relevant unit of competency must be uploaded.Any Registered Training Organisation (RTO) with this - RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on
|
scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.Statement of Attainment must comply with ASQA Requirements per:https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.Is valid for 12 months from date of completion.Must be current.Australian Electricity Supply Industry (ESI) issued skills passport is accepted.Uploaded document must include page of passport that shows ‘UETTDRRF03 - Perform EWP rescue’ as having been achieved with:- Ausgrid stamp being shown on this page
- Date of Training
- Trainer / Assessor Name & Signature
NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details
NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code | - The date of completion on the evidence should be recorded as the Issue Date in Pegasus
- Expiry date
|
to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4-week expiry for this documentation).Electrical.Statement of Attainment.UETTDRRF06 - Perform rescue from a live LV panel | Applicants | |
Install and maintain low voltage underground services | - Applicant’s name should be displayed on the evidence and should match the
|
applicant NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details
NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code- applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
- Documentation which has been found to be subject to alterations will not be accepted.
|
Statement of Attainment showing the relevant unit of competency must be uploaded.Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.Statement of Attainment must comply with ASQA Requirements per:https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.Is valid for 12 months from date of completion.Must be current.Australian Electricity Supply Industry (ESI) issued skills passport is accepted.Uploaded document must include page of passport that shows ‘UETTDRRF06 - Perform rescue from a live LV panel’ as having been achieved with:- Ausgrid stamp being shown on this page
- Date of Training
- Trainer / Assessor Name & Signature
to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4-week expiry for this documentation). | |
Electrical.Statement of Attainment. |
UETTDRRF08 - Perform EWP controlled descent escapeInstall and maintain low voltage overhead services | - Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
- Documentation which has been found to be subject to alterations will not be accepted.
Accepted form/s of evidence: - Statement of Attainment OR Transcript showing
|
the relevant unit of competency must be uploaded.Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.Statement of Attainment must comply with ASQA Requirements per:https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.Is valid for 12 months from date of completion.Must be current.Australian Electricity Supply Industry (ESI) issued skills passport is accepted.Uploaded document must include page of passport that shows ‘UETTDRRF08 - Perform EWP controlled descent escape’ as having been achieved with:- Ausgrid stamp being shown on this page
- Date of Training
- Trainer / Assessor Name & Signature
NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details
NOTE: - anyone of the following : UETDRIS010, UETTDRIS56, UETTDRIS56A, UETTDRIS16B & UETTDRIS16A
2. Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO |
and indicates completion of a nationally recognised unit codeand indicates completion of a nationally recognised unit code 3. RTO issued certificate or transcript showing completion of Overhead Service Mains - Installation (Cat 3)
4. Skills passport showing stamp with indication of completion of Overhead Services (Cat 3)
- Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.
| - The date of completion on the evidence should be recorded as the Issue Date in Pegasus
- Expiry date
|
to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4-week expiry for this documentation).Electrical.Statement of Attainment.UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure | Applicants | |
Safety.Qualified.Meet requirements for Class 2D - Metering & Energizing Installations | Accepted form/s of evidence: - Applicant’s name should be displayed on the evidence and should match the
|
applicant 's - is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
- Documentation which has been found to be subject to alterations
|
will not be accepted.Statement of Attainment showing the relevant unit of competency must be uploaded.Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.Statement of Attainment must comply with ASQA Requirements per:https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements qualification and/or the qualification and/or unit of competency requirements.Is valid for 12 months from date of completion.Must be current.Australian Electricity Supply Industry (ESI) issued skills passport is accepted.Uploaded document must include page of passport that shows ‘UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure’ as having been achieved with:- Ausgrid stamp being shown on this page
- Date of Training
- Trainer / Assessor Name & Signature
NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details
NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code
- The date of completion on the evidence should be recorded as the Issue Date in Pegasus
- Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4-week expiry for this documentation).
| Electrical.Statement of Attainment.UETTDRRF10 - First Aid in an ESI Environment | - Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
- Documentation which has been found to be subject to alterations will not be accepted.
- Statement of Attainment showing the relevant unit of competency must be uploaded.
- Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
- Statement of Attainment must comply with ASQA Requirements per:
https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements
Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.Is valid for 12 months from date of completion.Must be current. | The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
| |
Electrical.Qualified.Apply environmentally and sustainable procedures in the energy sector | - Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
- Documentation which has been found to be subject to alterations will not be accepted.
- RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
- Recognised Training Institution’s name to be displayed on document.
- Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
- Completion date or issue date must be displayed
- Accepted Course Titles / Codes:
- UEERE0001
- UEENEEK142A
- UEENEEK042A
- No expiry
- Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.
For overseas / international engineering qualifications to be accepted they need to either be recognised under the: NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code
| |
|
Safety.Qualified.Category 4 - Metering & Energizing Installations | - Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
Accepted Form/s of Evidence: - RTO issued Certificate or Transcript showing completion of Cat 4 - Metering / Metering & Energising OR Metering - Cat 4 / Cat 4 - Metering OR CA004
- Australian Electricity Supply Industry (ESI) issued skills passport
|
is accepted.Uploaded document must include page of passport that shows ‘UETTDRRF10B - Provide first aid in an ESI environment’ as having been achieved with:- Ausgrid stamp being shown on this page
- Date of Training
- Trainer / Assessor Name & Signature
NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO detailsNOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code- :
- Ausgrid issued Certificate of Completion showing Services Metering & Energising Electrical Installations CA 0005 (Categories 1 & 4)
- Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
- Uploaded document must include page of passport that shows ‘Cat 4 - Metering/ Metering & Energising’ as having been achieved with:
- Ausgrid OR Energy Australia stamp being shown on this page
- Date of Training
- Trainer / Assessor Name & Signature
- Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.
- Documentation which has been found to be subject to alterations will not be accepted.
| - The date of completion on the evidence should be recorded as the Issue Date in Pegasus
- Expiry date
|
to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4-week expiry for this documentation). | |
Electrical.Statement of Attainment. |
UETTDRRF11A – Testing of Connections to LV Electricity NetworksApplicants Comply with environmental requirements | - Applicant’s name should be displayed on the evidence and should match the
|
applicant - applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
- Documentation which has been found to be subject to alterations will
|
not be accepted.Statement of Attainment showing the relevant unit of competency must be uploaded.Any Registered Training Organisation (RTO) with this - not be accepted.
- RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on
|
scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.Statement of Attainment must comply with ASQA Requirements per:https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements Upon verification; - their scope of registration to deliver training and/or assessment
- Recognised Training Institution’s name to be displayed on document.
- Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
- Completion date or issue date must be displayed
- Accepted Course Titles / Codes:
- UETDREL002
- UETTDREL13
- UETTDREL13A
- UETTDREL03B
- UETTDREL03A
- No expiry
- Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.
|
Is valid for 12 months from date of completion.Must be current.Australian Electricity Supply Industry (ESI) issued skills passport is accepted.Uploaded document must include page of passport that shows ‘UETTDRRF11A – Testing of connections to low voltage electricity networks’ as having been achieved with:- Ausgrid stamp being shown on this page
- Date of Training
- Trainer / Assessor Name & Signature
NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details For overseas / international engineering qualifications to be accepted they need to either be recognised under the: NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code | The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date |
to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4-week expiry for this documentation).Electrical.Qualified.Meet requirements for Class 2D - Metering & Energising Installations | Applicants = none |
|
Electrical.Statement of Attainment.Control vegetation in the vicinity of live electrical apparatus from within the tree | - Applicant’s name should be displayed on the evidence and should match the
|
applicant - applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
- Documentation which has been
|
found to be subject to alterations will not be accepted.The uploaded evidence must show the individual meets the requirements for Class 2D - Metering & Energising Installations Authorisation.NOTE: An ASP Authorisation card showing 2D is accepted in lieu of the above requirements providing it is still current and has been issued by an NSW distribution network operator (Ausgrid, Essential Energy or Endeavour Energy).
- The date of completion on the evidence should be recorded as the Issue Date in Pegasus
- Expiry date = none
| Electrical.Qualified.UEENEEK142A Apply environmentally and sustainable procedures in the energy sector or Cat 4 - Metering & Energising | Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.Documentation which has been found to be subject to alterations will not be accepted.The uploaded evidence must show completion of UEENEEK142A Apply environmentally and sustainable procedures in the energy sector or Cat 4 - Metering & Energising.Australian Electricity Supply Industry (ESI) issued skills passport is accepted for Cat 4 - Metering & Energising.Uploaded document must include page of passport that shows ‘Cat 4 - Metering & Energising’ as having been achieved with:- Ausgrid stamp being shown on this page
- Date of Training
- Trainer / Assessor Name & Signature
Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.- found to be subject to alterations will not be accepted.
- RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
- Recognised Training Institution’s name to be displayed on document.
- Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
- Completion date or issue date must be displayed
- Accepted Course Titles / Codes:
· UETTDRVC21 (Completion date must be prior to 20/09/2022) · 12-month expiry - Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.
For overseas / international engineering qualifications to be accepted they need to either be recognised under the: NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code | The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry |
date = nonedate to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation). |
|