Competency | Competency Requirements | Upload Requirements | Examples |
---|---|---|---|
Electrical.Apprentice.Apprenticeship Training Contract as an Electrician from the Australian Apprenticeship Centre |
Please note letter from NSW Government Education- Training Services NSW is accepted
|
|
|
| |
Electrical.Authorised.Previously authorised with Category 1 – Disconnect and Reconnect as at the 30 December |
2016 |
|
- Ausgrid stamp being shown on this page
- Date of Training
- Trainer / Assessor Name
- Signature
NOTE: An ASP Authorisation card showing class 2A and 2D is accepted in lieu of the above requirements providing it is still current and has been issued by an NSW distribution network operator (Ausgrid, Essential Energy or Endeavour Energy).
Accepted Forms of Evidence: 1. An ASP Authorisation card showing classes 2A and 2D that is either valid or expired by no more than 12 months This card can be issued by any NSW distribution network operator (Either Ausgrid, Essential Energy or Endeavour Energy). |
|
| |
Electrical.Certificate III. |
UTE31199 - Electrotechnology Systems Electrician |
|
|
|
|
| |
Electrical. Certificate III |
in Electrotechnology Electrician |
|
|
|
|
|
| |
Electrical. Certificate III. |
UET30612- Certificate III in ESI -Power Systems - Distribution |
|
|
|
|
| |
Electrical. |
Certificate III. UET30621- Certificate III in ESI - Distribution Overhead |
|
|
|
The uploaded evidence will show completion of: Ausgrid’s Electrical Safety Rules (ESRs)
The date of completion on the evidence should be recorded as the Issue Date in Pegasus
When Certificate is uploaded:
|
|
When certificate is uploaded:
- Issue Date = The date of expiration on the evidence
When Licence is uploaded:
- Expiry Date = The date of expiration on the evidence
When remittance or receipt (For new contractor Licence) has been uploaded:
- The date of expiration on the evidence should be recorded as the date which is calculated to be 4x weeks from the date of renewal completion
When Licence is uploaded:
- Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- ‘Electrician’ or similar to be listed
- Screenshots from websites are not accepted - Must be copy of the Licence
- Must be issued by a relevant Australian state government authority with corresponding logo shown on licence EG NSW Department of Fair Trading
- Black and white or coloured copy of evidence can be accepted
- Supervisor licence can be accepted for the Electrical Contractor licence
When remittance or receipt (For new contractor Licence) has been uploaded:
- Applicants name to be displayed on uploaded evidence and to match applicants registered name
- ‘Electrician’ or similar to be listed
- Date of receipt to be displayed on the remittance or receipt
- Contractor number to be displayed on document
- Must be issued by relevant state government authority
- Black and white or coloured copy of evidence can be accepted
When Licence is uploaded:
- Expiry Date = The date of expiration on the evidence
When remittance or receipt (For new contractor Licence) has been uploaded:
- The date of expiration on the evidence should be recorded as the date which is calculated to be 4x weeks from the date of renewal completion
|
When Licence is uploaded:
- Applicants name to be displayed on uploaded evidence and to match applicants registered name
- ‘Electrician’ or similar to be listed
- Screenshots from websites are not accepted - Must be copy of the Licence
- Must be issued by a relevant Australian state government authority with corresponding logo shown on licence EG NSW Department of Fair Trading
- Black and white or coloured copy of evidence can be accepted
- Supervisor licence can be accepted for the Electrical Contractor licence
When remittance or receipt (For new contractor Licence) has been uploaded:
- Applicants name to be displayed on uploaded evidence and to match applicants registered name
- ‘Electrician’ or similar to be listed
- Date of receipt to be displayed on the remittance or receipt
- Contractor number to be displayed on document
- Must be issued by relevant state government authority
- Black and white or coloured copy of evidence can be accepted
| |||
Electrical.Certificate III.UET30812 - Certificate III in ESI - Power Systems - Distribution Cable Jointing |
For overseas / international engineering qualifications to be accepted they need to either be recognised under the:
|
| |
Electrical.Licence.Electrical Contractors Licence endorsed with a (Q) |
When Licence is uploaded:
|
|
|
|
|
When remittance or receipt (For new contractor Licence) has been uploaded:
- Applicants name to be displayed on uploaded evidence and to match applicants registered name
- ‘Electrician’ or similar to be listed
- Date of receipt to be displayed on the remittance or receipt
- Contractor number to be displayed on document
- Must be issued by relevant state government authority
- Black and white or coloured copy of evidence can be accepted
|
| |
Electrical.Licence.Electrical Supervisors Licence |
Accepted form/s of evidence:
|
|
When remittance or receipt (For new contractor Licence) has been uploaded:
- The date of expiration on the evidence should be recorded as the date which is calculated to be 4x weeks from the date of renewal completion
Electrical.Licence.Electrical Supervisors Licence
When Licence is uploaded:
ApplicantsElectrical.Statement of Attainment.Install, set up and commission interval metering |
|
|
|
When remittance or receipt (for new contractor licence) has been uploaded:
- Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- Date of receipt to be displayed on the document
- contractor number to be displayed on the document
- Must be issued by relevant state government authority
- Black and white or coloured copy of evidence can be accepted
When Licence is uploaded:
- Expiry Date = The date of expiration on the evidence
When remittance or receipt (For new contractor Licence) has been uploaded:
- The date of expiration on the evidence should be recorded as the date which is calculated to be 4x weeks from the date of renewal completion
NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details.
NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code.
The date of completion on the evidence should be recorded as the Issue Date in Pegasus
- Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- Statement of Attainment showing the relevant unit of competency must be uploaded.
- Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
- Statement of Attainment must comply with ASQA Requirements per:
- https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements
NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details.
NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code.
The date of completion on the evidence should be recorded as the Issue Date in Pegasus
- Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- Statement of Attainment showing the relevant unit of competency must be uploaded.
- Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
- Statement of Attainment must comply with ASQA Requirements per:
- https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements
NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details.
NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code.
For overseas / international engineering qualifications to be accepted they need to either be recognised under the:
NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code |
| |
Electrical.Statement of Attainment. Install and replace energy meters and associated equipment |
|
For overseas / international engineering qualifications to be accepted they need to either be recognised under the:
NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code |
| |
Electrical.Statement of Attainment.Lay power cables |
For overseas / international engineering qualifications to be accepted they need to either be recognised under the:
Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification |
|
| |
Electrical.Statement of Attainment. |
Joint, terminate and maintain |
low voltage underground paper insulated |
cable |
|
NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details.
NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code.
The date of completion on the evidence should be recorded as the Issue Date in Pegasus
|
NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details.
NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code.
The
For overseas / international engineering qualifications to be accepted they need to either be recognised under the:
Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification |
| |
Electrical.Statement of Attainment.Joint, terminate and maintain high voltage underground paper insulated cable |
|
For overseas / international engineering qualifications to be accepted they need to either be recognised under the:
Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification |
|
| |
Electrical.Statement of Attainment. |
Joint, terminate and maintain |
high voltage underground polymeric |
cable |
|
|
NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details.
NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code.
The date of completion on the evidence should be recorded as the Issue Date in Pegasus
- Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- Statement of Attainment showing the relevant unit of competency must be uploaded.
- Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
- Statement of Attainment must comply with ASQA Requirements per:
- https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements
- Australian Electricity Supply Industry (ESI) issued skills passport is accepted.
- Uploaded document must include page of passport that shows ‘UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work’ as having been achieved with:
o Ausgrid stamp being shown on this page
o Date of Training
o Trainer / Assessor Name
o Signature
- Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid specific version of ‘UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work’ has been completed.
NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details.
NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it
has been issued by an RTO and indicates completion of a nationally recognised unit code.
NOTE: All ASP1s - Ausgrid’s Electrical Safety Rules (ESRs) training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised.
NOTE: All ASP2s must complete their initial Ausgrid Electrical Safety Rules (ESR) training with Ausgrid’s Training Group. After the initial training the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned training.
- Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- Statement of Attainment showing the relevant unit of competency must be uploaded.
- Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
- Statement of Attainment must comply with ASQA Requirements per:
- https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements
- Australian Electricity Supply Industry (ESI) issued skills passport is accepted.
- Uploaded document must include page of passport that shows ‘UETTDRRF02 - Perform Pole Top Rescue' as having been achieved with:
o Ausgrid stamp being shown on this page
o Date of Training
o Trainer / Assessor Name
o Signature
- Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid specific version of ‘UETTDRRF02 - Perform Pole Top Rescue’ has been completed.
NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details.
NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it
has been issued by an RTO and indicates completion of a nationally recognised unit code.
NOTE: All ASP1s - Ausgrid’s Electrical Safety Rules (ESRs) training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised.
NOTE: All ASP2s must complete their initial Ausgrid Electrical Safety Rules (ESR) training with Ausgrid’s Training Group. After the initial training the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned training.
| The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none | |
Electrical.Statement of Attainment. Joint, terminate and maintain low voltage underground polymeric cable |
|
o Ausgrid stamp being shown on this page
o Date of Training
o Trainer / Assessor Name
o Signature
- Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid specific version of ‘UETTDREL14 - Working safely near live electrical apparatus as a non electrical worker’ has been completed.
NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details.
NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it
has been issued by an RTO and indicates completion of a nationally recognised unit code.
NOTE: All ASP1s - Ausgrid’s Electrical Safety Rules (ESRs) training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised.
NOTE: All ASP2s must complete their initial Ausgrid Electrical Safety Rules (ESR) training with Ausgrid’s Training Group. After the initial training the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned training.
The date of completion on the evidence should be recorded as the Issue Date in Pegasus
- Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- Statement of Attainment showing the relevant unit of competency must be uploaded.
- Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
- Statement of Attainment must comply with ASQA Requirements per:
- https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements
- Australian Electricity Supply Industry (ESI) issued skills passport is accepted.
- Uploaded document must include page of passport that shows ‘UETTDREL16 - Working safely near live electrical apparatus’ as having been achieved with:
o Ausgrid stamp being shown on this page
o Date of Training
o Trainer / Assessor Name
o Signature
- Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid specific version of ‘UETTDREL16 - Working safely near live electrical apparatus’ has been completed.
NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details.
NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it
has been issued by an RTO and indicates completion of a nationally recognised unit code.
NOTE: All ASP1s - Ausgrid’s Electrical Safety Rules (ESRs) training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised.
NOTE: All ASP2s must complete their initial Ausgrid Electrical Safety Rules (ESR) training with Ausgrid’s Training Group. After the initial training the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned training.
The date of completion on the evidence should be recorded as the Issue Date in Pegasus
- Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- Statement of Attainment showing the relevant unit of competency must be uploaded.
- Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
- Statement of Attainment must comply with ASQA Requirements per:
- https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements
NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details.
NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code.
The date of completion on the evidence should be recorded as the Issue Date in Pegasus
- Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- Statement of Attainment showing the relevant unit of competency must be uploaded.
- Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
- Statement of Attainment must comply with ASQA Requirements per:
- https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements
NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details.
NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code.
The date of completion on the evidence should be recorded as the Issue Date in Pegasus
|
|
| |
Install and maintain low voltage underground services |
|
|
o Ausgrid stamp being shown on this page
o Date of Training
o Trainer / Assessor Name
o Signature
- Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid specific version of ‘UETTDRRF03 - Perform EWP rescue’ has been completed.
NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details.
NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it
has been issued by an RTO and indicates completion of a nationally recognised unit code.
NOTE: All ASP1s - Ausgrid’s Electrical Safety Rules (ESRs) training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised.
NOTE: All ASP2s must complete their initial Ausgrid Electrical Safety Rules (ESR) training with Ausgrid’s Training Group. After the initial training the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned training.
|
|
| |
Electrical.Statement of Attainment. |
o Ausgrid stamp being shown on this page
o Date of Training
o Trainer / Assessor Name
o Signature
- Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid specific version of ‘UETTDRRF06 - Perform rescue from a live LV panel’ has been completed.
NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details.
NOTE:Install and maintain low voltage overhead services |
|
Accepted form/s of evidence:
2. Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it |
has been issued by an RTO and indicates completion of a nationally recognised unit code |
NOTE: All ASP1s - Ausgrid’s Electrical Safety Rules (ESRs) training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised.
NOTE: All ASP2s must complete their initial Ausgrid Electrical Safety Rules (ESR) training with Ausgrid’s Training Group. After the initial training the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned training.
3. RTO issued certificate or transcript showing completion of Overhead Service Mains - Installation (Cat 3) 4. Skills passport showing stamp with indication of completion of Overhead Services (Cat 3)
|
|
| |
Safety.Qualified.Meet requirements for Class 2D - Metering & Energizing Installations | Accepted form/s of evidence:
|
|
|
|
o Ausgrid stamp being shown on this page
o Date of Training
o Trainer / Assessor Name
o Signature
- Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid specific version of ‘UETTDRRF08 - Perform EWP controlled descent escape’ has been completed.
NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details.
NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it
has been issued by an RTO and indicates completion of a nationally recognised unit code.
NOTE: All ASP1s - Ausgrid’s Electrical Safety Rules (ESRs) training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised.
NOTE: All ASP2s must complete their initial Ausgrid Electrical Safety Rules (ESR) training with Ausgrid’s Training Group. After the initial training the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned training.
The date of completion on the evidence should be recorded as the Issue Date in Pegasus
- Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- Statement of Attainment showing the relevant unit of competency must be uploaded.
- Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
- Statement of Attainment must comply with ASQA Requirements per:
- https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements
- Australian Electricity Supply Industry (ESI) issued skills passport is accepted.
- Uploaded document must include page of passport that shows ‘UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure’ as having been achieved with:
o Ausgrid stamp being shown on this page
o Date of Training
o Trainer / Assessor Name
o Signature
- Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid specific version of ‘UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure’ has been completed.
NOTE: RTO Training
| The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none | |
Electrical.Qualified.Apply environmentally and sustainable procedures in the energy sector |
For overseas / international engineering qualifications to be accepted they need to either be recognised under the:
NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details |
NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it |
has been issued by an RTO and indicates completion |
NOTE: All ASP1s - Ausgrid’s Electrical Safety Rules (ESRs) training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised.
NOTE: All ASP2s must complete their initial Ausgrid Electrical Safety Rules (ESR) training with Ausgrid’s Training Group. After the initial training the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned training.
of a nationally recognised unit code |
|
Safety. |
Qualified.Category 4 - Metering & Energizing Installations |
|
Accepted Form/s of Evidence:
|
|
|
|
|
o Signature
- Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid specific version of ‘UETTDRRF10 - First Aid in an ESI Environment’ has been completed.
NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details.
NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it
has been issued by an RTO and indicates completion of a nationally recognised unit code.
NOTE: All ASP1s - Ausgrid’s Electrical Safety Rules (ESRs) training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised.
NOTE: All ASP2s must complete their initial Ausgrid Electrical Safety Rules (ESR) training with Ausgrid’s Training Group. After the initial training the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned training.
The date of completion on the evidence should be recorded as the Issue Date in Pegasus
- Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- Statement of Attainment showing the relevant unit of competency must be uploaded.
- Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
- Statement of Attainment must comply with ASQA Requirements per:
- https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements
- Australian Electricity Supply Industry (ESI) issued skills passport is accepted.
- Uploaded document must include page of passport that shows ‘UETTDRRF11A – Testing of Connections to LV Electricity Networks’ as having been achieved with:
o Ausgrid stamp being shown on this page
o Date of Training
o Trainer / Assessor Name
o Signature
- Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid specific version of ‘UETTDRRF11A – Testing of Connections to LV Electricity Networks’ has been completed.
NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details.
NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it
has been issued by an RTO and indicates completion of a nationally recognised unit code.
NOTE: All ASP1s - Ausgrid’s Electrical Safety Rules (ESRs) training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised.
NOTE: All ASP2s must complete their initial Ausgrid Electrical Safety Rules (ESR) training with Ausgrid’s Training Group. After the initial training the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned training.
The date of completion on the evidence should be recorded as the Issue Date in Pegasus
No Expiry Date
· Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
· If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
· Documentation which has been found to be subject to alterations will not be accepted.
· The uploaded evidence must show completion of UEENEEK142A Apply environmentally and sustainable procedures in the energy sector or Cat 4 - Metering & Energising.
· Australian Electricity Supply Industry (ESI) issued skills passport is accepted for Cat 4 - Metering & Energising.
· Uploaded document must include page of passport that shows ‘Cat 4 - Metering & Energising’ as having been achieved with:
o Ausgrid stamp being shown on this page
o Date of Training
o Trainer / Assessor Name & Signature
· Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.
|
| ||
Electrical.Statement of Attainment.Comply with environmental requirements |
For overseas / international engineering qualifications to be accepted they need to either be recognised under the:
| The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none | |
Electrical.Statement of Attainment.Control vegetation in the vicinity of live electrical apparatus from within the tree |
· UETTDRVC21 (Completion date must be prior to 20/09/2022) · 12-month expiry
For overseas / international engineering qualifications to be accepted they need to either be recognised under the:
NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code | The date of completion on the evidence should be recorded as the Issue Date in Pegasus |
Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation). |