Page History

Image RemovedImage Added

Competency

Competency Requirements

Upload Requirements

Examples

Electrical.Apprentice.Apprenticeship Training Contract as an Electrician from the Australian Apprenticeship Centre

Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
Documentation which has been found to be subject to alterations will not be accepted.
The uploaded evidence will be a copy of the applicants completed and signed apprenticeship contract
The evidence must indicate the apprenticeship is / was for Electrician

Please note letter from NSW Government Education- Training Services NSW is accepted

Name of applicant to be shown
Must

be issued by the Australian Apprenticeship Centre

show issue and expiry date

The date of contract commencement on the evidence should be recorded as the Issue Date in Pegasus
Expiry date = none

Issue date=

start date

Date of Commencement Expiry date= Full term completion date	Image Added Image Added
Electrical.Authorised.Previously authorised with Category 1 – Disconnect and Reconnect as at the 30 December

2016

2016

Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
Documentation which has been found to be subject to alterations will not be accepted.

The uploaded evidence will show that the applicant was previously authorised with Category 1 – Disconnect and Reconnect as at the 30 December 2016, for external RTOs, training must include Movement of Point of Attachment. Note: Movement of Point of Attachment training is not required if combined with CAT 3 training in overhead service mains.

Australian Electricity Supply Industry (ESI) issued skills passport is accepted.

Uploaded document must include page of passport that shows ‘Category 1 – Disconnect and Reconnect’ as having been achieved prior to 1 January 2017 with:

Ausgrid stamp being shown on this page
Date of Training
Trainer / Assessor Name
Signature

NOTE: An ASP Authorisation card showing class 2A and 2D is accepted in lieu of the above requirements providing it is still current and has been issued by an NSW distribution network operator (Ausgrid, Essential Energy or Endeavour Energy).

The date of completion on

Accepted Forms of Evidence:

1. An ASP Authorisation card showing classes 2A and 2D that is either valid or expired by no more than 12 months

This card can be issued by any NSW distribution network operator (Either Ausgrid, Essential Energy or Endeavour Energy).

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Electrical.

(ONLY REQUIRED IF THE EVIDENCE SUPPLIED SHOWS AN ISSUE DATE) Expiry Date = None	Image Added Image Added
Electrical.Certificate III.

UET30612 - Certificate III in ESI - Power Systems - Distribution Overhead (Linesman)

UTE31199 - Electrotechnology Systems Electrician

- Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
- Documentation which has been found to be subject to alterations will not be accepted.
- RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
- Recognised Training Institution’s name to be displayed on document.
- Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
- Completion date or issue date must be displayed

.Course title and associated level to be listed on certificate to match the nominated coding and title within Pegasus Document / Certificate / Number

- Accepted course code/s: UTE31199
- No expiry

.

- Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.
For overseas / international engineering qualifications to be accepted they need to either be recognised under the:
- Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.

org OR

- org OR;
Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

The date of completion on the evidence should be recorded as the Issue Date in Pegasus
Expiry date = none

Image Added

Electrical

. Certificate III

.

UEE30811 -

Certificate III in Electrotechnology Electrician

- Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
- Documentation which has been found to be subject to alterations will not be accepted.
- RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
- Recognised Training Institution’s name to be displayed on document.
- Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
- Completion date or issue date must be displayed

.Course title and associated level to be listed on certificate to match the nominated coding and title within Pegasus Document / Certificate / Number

- Accepted course code/s: UEE30811 OR UEE30807 OR UTE31199 OR UEE308
- No expiry

.

- Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.
For overseas / international engineering qualifications to be accepted they need to either be recognised under the:
- Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.

org OR

- org OR;
Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

The date of completion on the evidence should be recorded as the Issue Date in Pegasus
Expiry date = none

Electrical. Certificate III.

UET30812

UET30612- Certificate III in ESI -Power Systems - Distribution

Cable Jointing

- Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.

RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of

- If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
- Documentation which has been found to be subject to alterations will not be accepted.
- RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
- Recognised Training Institution’s name to be displayed on document.
- Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
- Completion date or issue date must be displayed

.Course title and associated level to be listed on certificate to match the nominated coding and title within Pegasus Document / Certificate / Number

- Accepted course code/s: UET30612, UET30209, UET30206
- No expiry

.

- Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.
For overseas / international engineering qualifications to be accepted they need to either be recognised under the:
- Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.

org OR

- org OR;
Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

The date of completion on the evidence should be recorded as the Issue Date in Pegasus
Expiry date = none

Electrical.

Induction.Ausgrid’s Electrical Safety Rules (ESRs)

Certificate III. UET30621- Certificate III in ESI - Distribution Overhead

- Applicants name should be displayed on the evidence and should match the applicant

name that

- name that's registered in

Onsite

- Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.

The uploaded evidence will show completion of: Ausgrid’s Electrical Safety Rules (ESRs)

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Electrical.Qualified.Electrical Certificate or Licence

When Certificate is uploaded:

Applicants name to be shown on documentation

Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)

Recognised Training Institution

- If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
- Documentation which has been found to be subject to alterations will not be accepted.
- RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
- Recognised Training Institution’s name to be displayed on document.
- Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
- Completion date or issue date must be displayed

Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite

Document / Certificate / Number

No expiry

- Accepted course code/s: UET30621
- No expiry
- Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.
For overseas / international engineering qualifications to be accepted they need to either be recognised under the:
- Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/),

- or

- http://www.ieagreements.org

When certificate is uploaded:

Issue Date = The date of expiration on the evidence

When Licence is uploaded:

Expiry Date = The date of expiration on the evidence

When remittance or receipt (For new contractor Licence) has been uploaded:

The date of expiration on the evidence should be recorded as the date which is calculated to be 4x weeks from the date of renewal completion

Electrical.Licence.NSW

When Licence is uploaded:

Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions

- OR;
Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

When Licence is uploaded:

Applicants name to be displayed on uploaded evidence and to match applicants registered name
‘Electrician’ or similar to be listed
Screenshots from websites are not accepted - Must be copy of the Licence
Must be issued by a relevant Australian state government authority with corresponding logo shown on licence EG NSW Department of Fair Trading
Black and white or coloured copy of evidence can be accepted
Supervisor licence can be accepted for the Electrical Contractor licence

When remittance or receipt (For new contractor Licence) has been uploaded:

Applicants name to be displayed on uploaded evidence and to match applicants registered name
‘Electrician’ or similar to be listed
Date of receipt to be displayed on the remittance or receipt
Contractor number to be displayed on document
Must be issued by relevant state government authority
Black and white or coloured copy of evidence can be accepted

The date of completion on the evidence should be recorded as the Issue Date in Pegasus
Expiry date = none

Electrical.Certificate III.UET30812 - Certificate III in ESI - Power Systems - Distribution Cable Jointing

Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
Documentation which has been found to be subject to alterations will not be accepted.
RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
Recognised Training Institution’s name to be displayed on document.
Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
Completion date or issue date must be displayed
Accepted Course Titles / Codes:
- UET30812
- UET30409
- UET30819
- UET30406
- Electricity Supply Industry Cable Jointing (Power Line)
Pegasus Document / Certificate / Number
No expiry
Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

The date of completion on the evidence should be recorded as the Issue Date in Pegasus
Expiry date = none

Electrical.Licence.Electrical Contractors Licence endorsed with a (Q)

Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.

‘Electrician’ or similar to be listed

Screenshots from websites are not accepted - Must be

If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
Documentation which has been found to be subject to alterations will not be accepted.
Must be an electrical contractors licence showing 'Q'.
Screenshots from websites are not accepted - Must be copy of the Licence
Must be issued by a relevant Australian state government authority

with corresponding logo shown on licence

EG

. i.e. NSW Department of Fair Trading

Black and white or coloured copy of evidence can be accepted

Supervisor licence can be accepted for the Electrical Contractor licence

When remittance or receipt (For new contractor Licence) has been uploaded:

Applicants name to be displayed on uploaded evidence and to match applicants registered name
‘Electrician’ or similar to be listed
Date of receipt to be displayed on the remittance or receipt
Contractor number to be displayed on document
Must be issued by relevant state government authority
Black and white or coloured copy of evidence can be accepted

When Licence is uploaded:

.

Issue date = none
Expiry Date = The date of expiration on the evidence

Image Added

Electrical.Licence.Electrical Supervisors Licence

Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
Documentation which has been found to be subject to alterations will not be accepted.
Must be issued by a relevant Australian state government authority with corresponding logo shown on licence. i.e. NSW Department of Fair Trading

Accepted form/s of evidence:

Must be a copy of an electrical licence showing 'Supervisor Certificate' OR
Screenshot from onegov.nsw.gov.au website showing 'Supervisor Certificate'

Issue date = none
Expiry Date = The date of expiration on the evidence

When remittance or receipt (For new contractor Licence) has been uploaded:

The date of expiration on the evidence should be recorded as the date which is calculated to be 4x weeks from the date of renewal completion

Electrical.Licence.Electrical Contractors Licence endorsed with a (Q)

When Licence is uploaded:

Applicants name should be displayed on the evidence and should match the applicant name that's registered in

Image Added

Electrical.Statement of Attainment.Install, set up and commission interval metering

Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted

.

Must be an electrical contractors licence showing 'Q'

Screenshots from websites are not accepted - Must be copy of the Licence

Must be issued by a relevant Australian state government authority with corresponding logo shown on licence i.e NSW Department of Fair Trading

Black and white or coloured copy of evidence can be accepted

When remittance or receipt (For new contractor Licence) has been uploaded:

Applicants name to be displayed on uploaded evidence and to match applicants registered name
‘Electrician’ or similar to be listed
Date of receipt to be displayed on the remittance or receipt
Contractor number to be displayed on document
Must be issued by relevant state government authority
Black and white or coloured copy of evidence can be accepted

When Licence is uploaded:

Expiry Date = The date of expiration on the evidence

When remittance or receipt (For new contractor Licence) has been uploaded:

The date of expiration on the evidence should be recorded as the date which is calculated to be 4x weeks from the date of renewal completion

Electrical.Licence.Electrical Supervisors Licence

When Licence is uploaded:

Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
Must be an electrical licence showing 'Supervisor Certificate'.
Screenshots from websites are not accepted - Must be copy of the Licence
Must be issued by a relevant Australian state government authority with corresponding logo shown on licence. i.e. NSW Department of Fair Trading
Black and white or coloured copy of evidence can be accepted

When remittance or receipt (for new contractor licence) has been uploaded:

Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened

If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus
Documentation which has been found to be subject to alterations will not be accepted
RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
Recognised Training Institution’s name to be displayed on document.
Actual copy of certificate / degree is required. Letters are not accepted in lieu of this
Completion date or issue date must be displayed
Accepted Course Titles / Codes:

UEEEL0013
UEENEEG171A
UEENEEG071C
UEENEEG071B
UEEEL0078

No expiry
Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements

For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

The date of completion on the evidence should be recorded as the Issue Date in Pegasus
Expiry date = none

Electrical.Statement of Attainment. Install and replace energy meters and associated equipment

Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
If there is a Date of

receipt to be displayed on the document

contractor number to be displayed on the document

Must be issued by relevant state government authority

Black and white or coloured copy of evidence can be accepted

When Licence is uploaded:

Expiry Date = The date of expiration on the evidence

When remittance or receipt (For new contractor Licence) has been uploaded:

The date of expiration on the evidence should be recorded as the date which is calculated to be 4x weeks from the date of renewal completion

Electrical.Statement of Attainment.UETTDRIS60A - Install and replace power system energy meters and associated equipment

Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
Statement of Attainment showing the relevant unit of competency must be uploaded.
Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
Statement of Attainment must comply with ASQA Requirements per:
https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements
Australian Electricity Supply Industry (ESI) issued skills passport is accepted.
Uploaded document must include page of passport that shows ‘UETTDRIS60A - Install and replace power system energy meters and associated equipment’ as having been achieved with:

o Ausgrid stamp being shown on this page

o Date of Training

o Trainer / Assessor Name

o Signature

Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid specific version of ‘UETTDRIS60A - Install and replace power system energy meters and associated equipment’ has been completed.

NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details.

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it

has been issued by an RTO and indicates completion of a nationally recognised unit code.

NOTE: All ASP1s - Ausgrid’s Electrical Safety Rules (ESRs) training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised.

NOTE: All ASP2s must complete their initial Ausgrid Electrical Safety Rules (ESR) training with Ausgrid’s Training Group. After the initial training the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned training.

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Electrical.Statement of Attainment.UETTDRCJ21A – Lay ESI cables

Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
Statement of Attainment showing the relevant unit of competency must be uploaded.
Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
Statement of Attainment must comply with ASQA Requirements per:
https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements
Australian Electricity Supply Industry (ESI) issued skills passport is accepted.
Uploaded document must include page of passport that shows ‘UETTDRCJ21A – Lay ESI cables’ as having been achieved with:

o Ausgrid stamp being shown on this page

o Date of Training

o Trainer / Assessor Name

o Signature

Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid specific version of ‘UETTDRCJ21A – Lay ESI cables’ has been completed.

NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details.

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it

has been issued by an RTO and indicates completion of a nationally recognised unit code.

NOTE: All ASP1s - Ausgrid’s Electrical Safety Rules (ESRs) training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised.

NOTE: All ASP2s must complete their initial Ausgrid Electrical Safety Rules (ESR) training with Ausgrid’s Training Group. After the initial training the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned training.

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Electrical.Statement of Attainment.UETTDRCJ22A – Install and maintain de-energised low voltage underground paper insulated cables

Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
Statement of Attainment showing the relevant unit of competency must be uploaded.
Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
Statement of Attainment must comply with ASQA Requirements per:
https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements
Australian Electricity Supply Industry (ESI) issued skills passport is accepted.
Uploaded document must include page of passport that shows ‘UETTDRCJ22A – Install and maintain de-energised low voltage underground paper insulated cables’ as having been achieved with:

o Ausgrid stamp being shown on this page

o Date of Training

o Trainer / Assessor Name

o Signature

Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid specific version of ‘UETTDRCJ22A – Install and maintain de-energised low voltage underground paper insulated cables’ has been completed.

NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details.

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it

has been issued by an RTO and indicates completion of a nationally recognised unit code.

NOTE: All ASP1s - Ausgrid’s Electrical Safety Rules (ESRs) training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised.

NOTE: All ASP2s must complete their initial Ausgrid Electrical Safety Rules (ESR) training with Ausgrid’s Training Group. After the initial training the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned training.

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Electrical.Statement of Attainment.UETTDRCJ23A – Install and maintain de-energised high voltage underground paper insulated cables

Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
Statement of Attainment showing the relevant unit of competency must be uploaded.
Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
Statement of Attainment must comply with ASQA Requirements per:
https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements
Australian Electricity Supply Industry (ESI) issued skills passport is accepted.
Uploaded document must include page of passport that shows ‘UETTDRCJ23A – Install and maintain de-energised high voltage underground paper insulated cables’ as having been achieved with:

o Ausgrid stamp being shown on this page

o Date of Training

o Trainer / Assessor Name

o Signature

Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid specific version of ‘UETTDRCJ23A – Install and maintain de-energised high voltage underground paper insulated cables’ has been completed.

NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details.

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it

has been issued by an RTO and indicates completion of a nationally recognised unit code.

NOTE: All ASP1s - Ausgrid’s Electrical Safety Rules (ESRs) training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised.

NOTE: All ASP2s must complete their initial Ausgrid Electrical Safety Rules (ESR) training with Ausgrid’s Training Group. After the initial training the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned training.

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Electrical.Statement of Attainment.UETTDRCJ26A – Install and maintain de-energised low voltage underground polymeric cables

Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
Statement of Attainment showing the relevant unit of competency must be uploaded.
Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
Statement of Attainment must comply with ASQA Requirements per:
https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements
Australian Electricity Supply Industry (ESI) issued skills passport is accepted.
Uploaded document must include page of passport that shows ‘UETTDRCJ26A – Install and maintain de-energised low voltage underground polymeric cables’ as having been achieved with:

o Ausgrid stamp being shown on this page

o Date of Training

o Trainer / Assessor Name

o Signature

Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid specific version of ‘UETTDRCJ26A – Install and maintain de-energised low voltage underground polymeric cables’ has been completed.

NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details.

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it

has been issued by an RTO and indicates completion of a nationally recognised unit code.

NOTE: All ASP1s - Ausgrid’s Electrical Safety Rules (ESRs) training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised.

NOTE: All ASP2s must complete their initial Ausgrid Electrical Safety Rules (ESR) training with Ausgrid’s Training Group. After the initial training the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned training.

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Electrical.Statement of Attainment.UETTDRCJ27A – Install and maintain de-energised high voltage underground polymeric cables

Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
Statement of Attainment showing the relevant unit of competency must be uploaded.
Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
Statement of Attainment must comply with ASQA Requirements per:
https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements
Australian Electricity Supply Industry (ESI) issued skills passport is accepted.
Uploaded document must include page of passport that shows ‘UETTDRCJ27A – Install and maintain de-energised high voltage underground polymeric cables’ as having been achieved with:

o Ausgrid stamp being shown on this page

o Date of Training

o Trainer / Assessor Name

o Signature

Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid specific version of ‘UETTDRCJ27A – Install and maintain de-energised high voltage underground polymeric cables’ has been completed.

NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details.

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it

has been issued by an RTO and indicates completion of a nationally recognised unit code.

NOTE: All ASP1s - Ausgrid’s Electrical Safety Rules (ESRs) training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised.

NOTE: All ASP2s must complete their initial Ausgrid Electrical Safety Rules (ESR) training with Ausgrid’s Training Group. After the initial training the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned training.

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Electrical.Statement of Attainment.UETTDREL14 - Working safely near live electrical apparatus as a non electrical worker

Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
Statement of Attainment showing the relevant unit of competency must be uploaded.
Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
Statement of Attainment must comply with ASQA Requirements per:
https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements
Australian Electricity Supply Industry (ESI) issued skills passport is accepted.
Uploaded document must include page of passport that shows ‘UETTDREL14 - Working safely near live electrical apparatus as a non electrical worker’ as having been achieved with:

o Ausgrid stamp being shown on this page

o Date of Training

o Trainer / Assessor Name

o Signature

Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid specific version of ‘UETTDREL14 - Working safely near live electrical apparatus as a non electrical worker’ has been completed.

NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details.

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it

has been issued by an RTO and indicates completion of a nationally recognised unit code.

NOTE: All ASP1s - Ausgrid’s Electrical Safety Rules (ESRs) training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised.

NOTE: All ASP2s must complete their initial Ausgrid Electrical Safety Rules (ESR) training with Ausgrid’s Training Group. After the initial training the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned training.

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Electrical.Statement of Attainment.UETTDREL16 - Working safely near live electrical apparatus

Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
Statement of Attainment showing the relevant unit of competency must be uploaded.
Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
Statement of Attainment must comply with ASQA Requirements per:
https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements
Australian Electricity Supply Industry (ESI) issued skills passport is accepted.
Uploaded document must include page of passport that shows ‘UETTDREL16 - Working safely near live electrical apparatus’ as having been achieved with:

o Ausgrid stamp being shown on this page

o Date of Training

o Trainer / Assessor Name

o Signature

Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid specific version of ‘UETTDREL16 - Working safely near live electrical apparatus’ has been completed.

NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details.

NOTE: Temporary / Interim statement of attainment evidence

Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
Documentation which has been found to be subject to alterations will not be accepted.
RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
Recognised Training Institution’s name to be displayed on document.
Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
Completion date or issue date must be displayed
Accepted Course Titles / Codes:

UETDRIS014
UETTDRIS60
UETTDRIS60A
UETTDRIS20B
UETTDRIS20A

No expiry
Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only

from the date of the training being complete which should be indicated on the letter providing it

has been issued by an RTO and indicates completion of a nationally recognised unit code.

NOTE: All ASP1s - Ausgrid’s Electrical Safety Rules (ESRs) training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised.

NOTE: All ASP2s must complete their initial Ausgrid Electrical Safety Rules (ESR) training with Ausgrid’s Training Group. After the initial training the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned training.

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Electrical.Statement of Attainment.UETTDRIS55A – Install and maintain low voltage underground services

Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
Statement of Attainment showing the relevant unit of competency must be uploaded.
Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
Statement of Attainment must comply with ASQA Requirements per:
https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements
Australian Electricity Supply Industry (ESI) issued skills passport is accepted.
Uploaded document must include page of passport that shows ‘UETTDRIS55A – Install and maintain low voltage underground services’ as having been achieved with:

o Ausgrid stamp being shown on this page

o Date of Training

o Trainer / Assessor Name

o Signature

Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid specific version of ‘UETTDRIS55A – Install and maintain low voltage underground services’ has been completed.

NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details.

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it

has been issued by an RTO and indicates completion of a nationally recognised unit code.

NOTE: All ASP1s - Ausgrid’s Electrical Safety Rules (ESRs) training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised.

NOTE: All ASP2s must complete their initial Ausgrid Electrical Safety Rules (ESR) training with Ausgrid’s Training Group. After the initial training the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned training.

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Electrical.Statement of Attainment.UETTDRIS56A – Install and maintain low voltage overhead services

Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
Statement of Attainment showing the relevant unit of competency must be uploaded.
Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
Statement of Attainment must comply with ASQA Requirements per:
https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements
Australian Electricity Supply Industry (ESI) issued skills passport is accepted.
Uploaded document must include page of passport that shows ‘UETTDRIS56A – Install and maintain low voltage overhead services’ as having been achieved with:

o Ausgrid stamp being shown on this page

o Date of Training

o Trainer / Assessor Name

o Signature

Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid specific version of ‘UETTDRIS56A – Install and maintain low voltage overhead services’ has been completed.

NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details.

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it

has been issued by an RTO and indicates completion of a nationally recognised unit code.

NOTE: All ASP1s - Ausgrid’s Electrical Safety Rules (ESRs) training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised.

NOTE: All ASP2s must complete their initial Ausgrid Electrical Safety Rules (ESR) training with Ausgrid’s Training Group. After the initial training the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned training.

from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none	Image Added Image Added
Electrical.Statement of Attainment.Lay power cables	Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UETTDRCJ01A - Lay electrical cables UETTDRCJ01B - Lay electrical cables UETTDRCJ21A - Lay ESI electrical cables UETTDRCJ21 - Lay ESI electrical cables UETDRDU016 - Lay power cables Pegasus Document / Certificate / Number No expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none	Image Added Image Added Image Added
Electrical.Statement of Attainment.Joint, terminate and maintain low voltage underground paper insulated cable	Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UETDRDU014 UETTDRCJ22 UETTDRCJ22A UETTDRCJ02B UETTDRCJ02A UTTNTD307A Pegasus Document / Certificate / Number No expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Electrical.Statement of Attainment.Joint, terminate and maintain high voltage underground paper insulated cable	Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UETDRDU012 UETTDRCJ23 UETTDRCJ23A UETTDRCJ03B UETTDRCJ03A No expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification	The date of completion on the evidence should be recorded as the Issue Date

in Pegasus

in Pegasus Expiry date = none
Electrical.Statement of Attainment.

UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for workApplicants

Joint, terminate and maintain high voltage underground polymeric cable

- Applicant’s name should be displayed on the evidence and should match the

applicant

- applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for

'Christopher' is accepted.

Statement of Attainment showing the relevant unit of competency must be uploaded.

Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.

Statement of Attainment must comply with ASQA Requirements per:

https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements

Australian Electricity Supply Industry (ESI) issued skills passport is accepted.

Uploaded document must include page of passport that shows ‘UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work’ as having been achieved with:

o Ausgrid stamp being shown on this page

o Date of Training

o Trainer / Assessor Name

o Signature

Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid specific version of ‘UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work’ has been completed.

NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details.

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it

has been issued by an RTO and indicates completion of a nationally recognised unit code.

NOTE: All ASP1s - Ausgrid’s Electrical Safety Rules (ESRs) training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised.

NOTE: All ASP2s must complete their initial Ausgrid Electrical Safety Rules (ESR) training with Ausgrid’s Training Group. After the initial training the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned training.

The date of completion on the evidence should be recorded as the Issue Date in PegasusElectrical.Statement of Attainment.UETTDRRF02 - Perform Pole Top Rescue

Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
Statement of Attainment showing the relevant unit of competency must be uploaded.
Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
Statement of Attainment must comply with ASQA Requirements per:
https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements
Australian Electricity Supply Industry (ESI) issued skills passport is accepted.
Uploaded document must include page of passport that shows ‘UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work’ as having been achieved with:

o Ausgrid stamp being shown on this page

o Date of Training

o Trainer / Assessor Name

o Signature

Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid specific version of ‘UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work’ has been completed.

NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details.

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it

has been issued by an RTO and indicates completion of a nationally recognised unit code.

NOTE: All ASP1s - Ausgrid’s Electrical Safety Rules (ESRs) training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised.

NOTE: All ASP2s must complete their initial Ausgrid Electrical Safety Rules (ESR) training with Ausgrid’s Training Group. After the initial training the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned training.

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Electrical.Statement of Attainment.UETTDRRF03 - Perform EWP rescue

Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
Statement of Attainment showing the relevant unit of competency must be uploaded.
Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
Statement of Attainment must comply with ASQA Requirements per:
https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements
Australian Electricity Supply Industry (ESI) issued skills passport is accepted.
Uploaded document must include page of passport that shows ‘UETTDRRF03 - Perform EWP rescue’ as having been achieved with:

o Ausgrid stamp being shown on this page

o Date of Training

o Trainer / Assessor Name

o Signature

Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid specific version of ‘UETTDRRF03 - Perform EWP rescue’ has been completed.

NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details.

NOTE:

'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UETDRDU013 UETTDRCJ27 UETTDRCJ27A UETTDRCJ07B UETTDRCJ07A Tafe issued certificate or transcript displaying '7793BS - Cable jointing 1 - LV Polymeric' and '7793BT - Cable jointing 2 - HV Polymeric' No expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Electrical.Statement of Attainment. Joint, terminate and maintain low voltage underground polymeric cable	Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UETDRDU015 UETTDRCJ26 UETTDRCJ26A UETTDRCJ06B UETTDRCJ06A Passport document showing stamp for Underground Services Cat 2 Tafe issued certificate displaying 'Underground Service Mains – Installation (Cat 2) Code – 31755’ Tafe issued certificate or transcript displaying '7793BS - Cable jointing 1 - LV Polymeric' and '7793BT - Cable jointing 2 - HV Polymeric' No expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none	Image Added Image Added
Install and maintain low voltage underground services	Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UETDRIS011 UETTDRIS55 UETTDRIS55A UETTDRIS15B UETTDRIS15A RTO issued certificate showing completion of Underground Service Mains - Installation (Cat 2) Ausgrid OR Energy Australia issued certificate showing completion of Underground Service Installation - Connection & Disconnection Procedures - CA 0002 Skills passport showing stamp with indication of completion of Underground Services Cat 2 RPL'ed units on transcript are acceptable No expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none	Image Added Image Added Image Added
Electrical.Statement of Attainment.Install and maintain low voltage overhead services	Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. Accepted form/s of evidence: Statement of Attainment OR Transcript showing anyone of the following : UETDRIS010, UETTDRIS56, UETTDRIS56A, UETTDRIS16B & UETTDRIS16A RPL'ed units on transcript are acceptable Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document. Statement of Attainment must comply with ASQA Requirements per: https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements 2. Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it

has been issued by an RTO and indicates completion of a nationally recognised unit code

.

NOTE: All ASP1s - Ausgrid’s Electrical Safety Rules (ESRs) training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised.

NOTE: All ASP2s must complete their initial Ausgrid Electrical Safety Rules (ESR) training with Ausgrid’s Training Group. After the initial training the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned training.

3. RTO issued certificate or transcript showing completion of Overhead Service Mains - Installation (Cat 3)

4. Skills passport showing stamp with indication of completion of Overhead Services (Cat 3)

Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

The date of completion on the evidence should be recorded as the Issue Date

in PegasusElectrical.Statement of Attainment.UETTDRRF06 - Perform rescue from a live LV panelApplicants

in Pegasus
Expiry date = none

Image Added

Safety.Qualified.Meet requirements for Class 2D - Metering & Energizing Installations

Accepted form/s of evidence:

- Applicant’s name should be displayed on the evidence and should match

the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.

Statement of Attainment showing the relevant unit of competency must be uploaded.

Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.

Statement of Attainment must comply with ASQA Requirements per:

https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements

Australian Electricity Supply Industry (ESI) issued skills passport is accepted.

Uploaded document must include page of passport that shows ‘UETTDRRF06 - Perform rescue from a live LV panel’ as having been achieved with:

o Ausgrid stamp being shown on this page

o Date of Training

o Trainer / Assessor Name

o Signature

Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid specific version of ‘UETTDRRF06 - Perform rescue from a live LV panel’ has been completed.

NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details.

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it

has been issued by an RTO and indicates completion of a nationally recognised unit code.

NOTE: All ASP1s - Ausgrid’s Electrical Safety Rules (ESRs) training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised.

NOTE: All ASP2s must complete their initial Ausgrid Electrical Safety Rules (ESR) training with Ausgrid’s Training Group. After the initial training the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned training.

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Electrical.Statement of Attainment.UETTDRRF08 - Perform EWP controlled descent escape

Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
Statement of Attainment showing the relevant unit of competency must be uploaded.
Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
Statement of Attainment must comply with ASQA Requirements per:
https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements
Australian Electricity Supply Industry (ESI) issued skills passport is accepted.
Uploaded document must include page of passport that shows ‘UETTDRRF08 - Perform EWP controlled descent escape’ as having been achieved with:

o Ausgrid stamp being shown on this page

o Date of Training

o Trainer / Assessor Name

o Signature

Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid specific version of ‘UETTDRRF08 - Perform EWP controlled descent escape’ has been completed.

NOTE: RTO Training

- the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
- If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
- Documentation which has been found to be subject to alterations will not be accepted.
- RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
- Recognised Training Institution’s name to be displayed on document.
- Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
- Completion date or issue date must be displayed
- No expiry
- Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.
Accepted form/s of evidence:
- An ASP Authorisation card showing 2D is acceptable provided it is within 6 months from the expiration date and has been issued by an NSW distribution network operator (Ausgrid, Essential Energy or Endeavour Energy)
OR
- Energy Australia or IAC issued certificate or transcript showing completion of:
OR
- UEERE0001 - Apply environmentally and sustainable procedures in the energy sector¹ AND either
¹ Upon verification; an individual holding an equivalent unit of competency will also meet the unit of competency requirements.

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Expiry date = none

Image Added

Electrical.Qualified.Apply environmentally and sustainable procedures in the energy sector

Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
Documentation which has been found to be subject to alterations will not be accepted.
RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
Recognised Training Institution’s name to be displayed on document.
Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
Completion date or issue date must be displayed
Accepted Course Titles / Codes:

UEERE0001
UEENEEK142A
UEENEEK042A

No expiry
Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

.

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to

applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it

has been issued by an RTO and indicates completion of a nationally recognised unit code.

NOTE: All ASP1s - Ausgrid’s Electrical Safety Rules (ESRs) training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised.

NOTE: All ASP2s must complete their initial Ausgrid Electrical Safety Rules (ESR) training with Ausgrid’s Training Group. After the initial training the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned training.

applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

The date of completion on the evidence should be recorded as the Issue Date

in PegasusElectrical.Statement of Attainment.UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure

in Pegasus Expiry date = none
Safety.Qualified.Category 4 - Metering & Energizing Installations	Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.

Statement of Attainment showing the relevant unit of competency must be uploaded.

Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.

Statement of Attainment must comply with ASQA Requirements per:

https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements

If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.

Accepted Form/s of Evidence:

RTO issued Certificate or Transcript showing completion of Cat 4 - Metering / Metering & Energising OR Metering - Cat 4 / Cat 4 - Metering OR CA004
Australian Electricity Supply Industry (ESI) issued skills passport

is accepted.

Uploaded document must include page of passport that shows ‘UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure’ as having been achieved with:

o Ausgrid stamp being shown on this page

o Date of Training

o Trainer / Assessor Name

o Signature

Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid specific version of ‘UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure’ has been completed.

NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details.

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it

has been issued by an RTO and indicates completion of a nationally recognised unit code.

NOTE: All ASP1s - Ausgrid’s Electrical Safety Rules (ESRs) training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised.

NOTE: All ASP2s must complete their initial Ausgrid Electrical Safety Rules (ESR) training with Ausgrid’s Training Group. After the initial training the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned training.

:
Ausgrid issued Certificate of Completion showing Services Metering & Energising Electrical Installations CA 0005 (Categories 1 & 4)

Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
Uploaded document must include page of passport that shows ‘Cat 4 - Metering/ Metering & Energising’ as having been achieved with:
- Ausgrid OR Energy Australia stamp being shown on this page
- Date of Training
- Trainer / Assessor Name & Signature

Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.
Documentation which has been found to be subject to alterations will not be accepted.

The date of completion on the evidence should be recorded as the Issue Date in Pegasus
Expiry date = none

Image Added

Electrical.Statement of Attainment.

UETTDRRF10 - First Aid in an ESI EnvironmentApplicants

Comply with environmental requirements

Applicant’s name should be displayed on the evidence and should match the

applicant

applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.

Statement of Attainment showing the relevant unit of competency must be uploaded.

Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.

Statement of Attainment must comply with ASQA Requirements per:

https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements

Australian Electricity Supply Industry (ESI) issued skills passport is accepted.

Uploaded document must include page of passport that shows ‘UETTDRRF10 - First Aid in an ESI Environment’ as having been achieved with:

o Ausgrid stamp being shown on this page

o Date of Training

o Trainer / Assessor Name

o Signature

Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid specific version of ‘UETTDRRF10 - First Aid in an ESI Environment’ has been completed.

NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details.

If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
Documentation which has been found to be subject to alterations will not be accepted.
RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
Recognised Training Institution’s name to be displayed on document.
Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
Completion date or issue date must be displayed
Accepted Course Titles / Codes:

UETDREL002
UETTDREL13
UETTDREL13A
UETTDREL03B
UETTDREL03A

No expiry
Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period

of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it

has been issued by an RTO and indicates completion of a nationally recognised unit code.

NOTE: All ASP1s - Ausgrid’s Electrical Safety Rules (ESRs) training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised.

NOTE: All ASP2s must complete their initial Ausgrid Electrical Safety Rules (ESR) training with Ausgrid’s Training Group. After the initial training the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned training.

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Electrical.Statement of Attainment.UETTDRRF11A – Testing of Connections to LV Electricity Networks

Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
Statement of Attainment showing the relevant unit of competency must be uploaded.
Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.
Statement of Attainment must comply with ASQA Requirements per:
https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements
Australian Electricity Supply Industry (ESI) issued skills passport is accepted.
Uploaded document must include page of passport that shows ‘UETTDRRF11A – Testing of Connections to LV Electricity Networks’ as having been achieved with:

o Ausgrid stamp being shown on this page

o Date of Training

o Trainer / Assessor Name

o Signature

Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid specific version of ‘UETTDRRF11A – Testing of Connections to LV Electricity Networks’ has been completed.

NOTE: RTO Training

of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Expiry date = none

Electrical.Statement of Attainment.Control vegetation in the vicinity of live electrical apparatus from within the tree

Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
Documentation which has been found to be subject to alterations will not be accepted.
RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
Recognised Training Institution’s name to be displayed on document.
Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
Completion date or issue date must be displayed
Accepted Course Titles / Codes:

UETDRVC006

· UETTDRVC21 (Completion date must be prior to 20/09/2022)

· 12-month expiry

Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

.

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4

weeks only from the date of the training being complete which should be indicated on the letter providing it

has been issued by an RTO and indicates completion of a nationally recognised unit code.

NOTE: All ASP1s - Ausgrid’s Electrical Safety Rules (ESRs) training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised.

NOTE: All ASP2s must complete their initial Ausgrid Electrical Safety Rules (ESR) training with Ausgrid’s Training Group. After the initial training the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned training.

weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).

Page tree

Versions Compared

Old Version 11

New Version Current

Key