Child pages
  • Rio Tinto Aluminium | Individual Business Rules | Plant and Equipment
#trackbackRdf

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Image RemovedImage Added


Operator.Qualified.RTAY Conduct Backhoe/loader Operation; 31088956
Expand
titleNationally Accredited Training

Anchor
PandENAT
PandENAT

Expand
titleEquipment Operation
CompetencyCompetency RequirementsUpload RequirementsExamples

Hydraulic.Qualified.RTAY Portable Hydraulic Tool Oper (Prac); 31015986

Hydraulic.Qualified.RTAY Portable Hydraulic Tool Oper (Thy); 31015985

Hydraulic.Qualified.RTAY Torque Tools (Prac) - Hydraulic; 30481126

NOTE: If the CTO sign off is after 2021-12-01 then the record must be V2.0, If signed off before 2021-12-01 then a version older than 2.0 is acceptable. Version can be found in the footer of the document.

Operator.Qualified.RTAY Amphiroll Operation; 30555010

Operator.Qualified.RTAY Brush Cutter Operation; 30670459

Operator.Qualified.RTAY Compress Gas-Oxy Cutting; 30413954

Operator.Qualified.RTAY Respirator - Disposable P2; 30923871

Operator.Qualified.RTAY Respirator - Full Face; 30923869

Operator.Qualified.RTAY Respirator - Half Face; 30923870

Operator.Qualified.RTAY Torque Tools (Thy); 31015979

Operator Grinder.Qualified.RTAY Operate Angle Grinder 5/7inch; 31129720Pneumatics.-.RTAY Torque Tools (Prac) - Pneumatic; 31094234

Gas.-.RTAY Compressed Gas theory (use maintain); 31130126

Gas.-.RTAY Contractor Gas Training Theory; 31474502, 31473999

Gas.-.RTAY Contractors Gas Work Competency Certification; 31474503

Expand
titlePlant Operation
CompetencyCompetency RequirementsUpload RequirementsExamples
CompetencyCompetency RequirementsUpload RequirementsExamples

Operator.Licence.Backhoe Front End Loader

  • Name on Licence  / card to match the person registered
  • Class / Code LB to be listed or show indication of a statement of attainment unit of competency with corresponding coding
  • 'Conduct wheeler loader operations' is also acceptable.
  • Where a “card” showing a code for a piece of plant is used as evidence – the front and back of card needs to be uploaded
  • Issue date to be recorded as per licence
  • Black and white or colour copy acceptable
  • Needs to be issued by a training company with ABN but Does NOT need to be issued by Registered Training Organisation (RTO)
  • Verification of competency's (VOC's) cannot be accepted for this upload
  • An 'Assessment Summary' showing the relevant coding may be accepted for the temporary length of time nominated on this summary document as an 'interim document' until the statement of attainment or card / licence has been issued.
  • Tickets Tickets with NOHSC on the back or front of the cards are not cards are not acceptable
  • Issue date to be recorded as displayed on document.
  • Expiry Date = No expiry is required (If expiry is shown on uploaded document, disregard this)

Operator.Licence.Front End Loader

  • Name on Licence  / card to match the person registered
  • Class / Code LL to be listed or show indication of a statement of attainment unit of competency with corresponding coding
  • 'Conduct wheeler loader operations' is also acceptable.
  • Where a “card” showing a code for a piece of plant is used as evidence – the front and back of card needs to be uploaded
  • Issue date to be recorded as per licence
  • Black and white or colour copy acceptable
  • Needs to be issued by a training company with ABN but Does NOT need to be issued by Registered Training Organisation (RTO)
  • Verification of competency's (VOC's) cannot be accepted for this upload
  • An 'Assessment Summary' showing the relevant coding may be accepted for the temporary length of time nominated on this summary document as an 'interim document' until the statement of attainment or card / licence has been issued.
  • Tickets Tickets with NOHSC on the back or front of the cards are cards are not acceptable

Note - License showing code UD is also an acceptable form of competency. Please note both front and back of the card still needs to be uploaded. 

  • Issue date to be recorded as displayed on document.
  • Expiry Date = No expiry is required (If expiry is shown on uploaded document, disregard this)


Operator.Licence.LZ - Dozer

  • Name on Licence  / card to match the person registered
  • Class / Code LZ to be listed or show indication of a statement of attainment unit of competency with corresponding coding
  • Where a “card” showing a code for a piece of plant is used as evidence – the front and back of card needs to be uploaded
  • Issue date to be recorded as per licence
  • Black and white or colour copy acceptable
  • Needs to be issued by a training company with ABN but Does NOT need to be issued by Registered Training Organisation (RTO)
  • Verification of competency's (VOC's) cannot be accepted for this upload
  • An 'Assessment Summary' showing the relevant coding may be accepted for the temporary length of time nominated on this summary document as an 'interim document' until the statement of attainment or card / licence has been issued.
  • Tickets Tickets with NOHSC on the back or front of the cards are not cards are not acceptable
  • Issue date to be recorded as displayed on document.
  • Expiry Date = No expiry is required (If expiry is shown on uploaded document, disregard this)
Operator.Licence.Skid Steer Loader
  • Name on Licence  / card to match the person registered
  • Class / Code LS to be listed or show indication of a statement of attainment unit of competency with corresponding coding
  • Where a “card” showing a code for a piece of plant is used as evidence – the front and back of card needs to be uploaded
  • Issue date to be recorded as per licence
  • Black and white or colour copy acceptable
  • Needs to be issued by a training company with ABN but Does NOT need to be issued by Registered Training Organisation (RTO)
  • Statement of Attainment is acceptable with NRT logo
  • Verification of competency's (VOC's) cannot be accepted for this upload
  • An 'Assessment Summary' showing the relevant coding may be accepted for the temporary length of time nominated on this summary document as an 'interim document' until the statement of attainment or card / licence has been issued.
  • Tickets Tickets with NOHSC on the back or front of the cards are not cards are not acceptable
  • Issue date to be recorded as displayed on document.
  • Expiry Date = No expiry is required (If expiry is shown on uploaded document, disregard this)
 OperatorOperator.Licence.Operate High Pressure Water Jetting
  • Applicants name on the evidence must match what is displayed in the system (however shortened versions such as 'Chris' for 'Christopher' are accepted)
  • The required evidence will be either a statement or attainment or card
  • The required evidence will show completion of 'Operate a High Pressure Water Jetting System' Course with associated course title code such as MSMSS00004MSMWJ304, MSMSS00018 or earlier superseded versions of this course
  • Evidence will be issued by an Australian recognised training organisation (RTO)
  • Issue date to be recorded as displayed on document.
  • Expiry Date = No expiry is required
Expand
titleSite Based Assessments
Licence.-.Use High Pressure Water Jetting
  • Applicants name on the evidence must match what is displayed in the system (however shortened versions such as 'Chris' for 'Christopher' are accepted)
  • The required evidence will be either a statement or attainment or card
  • The required evidence will show completion of 'Use  High Pressure Water Jetting Equipment' Course with associated course code such as MSMWJ202, MSMSS00017 or earlier superseded versions of this course
  • Evidence will be issued by an Australian recognised training organisation (RTO)
Avetta staff click here for additional business rule information prior to file verification
  • Issue date to be recorded as displayed on document.
  • Expiry Date = No expiry is required

Licence/Certificate - Telehandler
  • Applicants name on the evidence must match what is displayed in the system (however shortened versions such as 'Chris' for 'Christopher' are accepted)
  • The required evidence will be either:
  • A gold card issued by TSH or;
  • A statement of attainment showing completion of RIIHAN309F (or earlier superseded versions of this course)
  • Evidence will be issued by an Australian recognised training organisation (RTO)
  • Issue Date to be recorded as displayed on document.
  • Expiry Date = Record the expiry date as it is shown on the evidence.

If an expiry is not displayed: calculate the expiry date to be 5 years from the issue date




Expand
titleSite Based Assessments


Expand
titleEquipment Operation

Anchor
PandEEO
PandEEO

CompetencyCompetency RequirementsUpload RequirementsExamples

Hydraulic.Qualified.RTAY Portable Hydraulic Tool Oper (Prac); 31015986

  • First and last name must match applicant's name in Onsite

Shortened versions of first names are accepted, such as:
"Chris" instead of "Christopher"
"Wil" instead of "William"

Shortened versions of last names are accepted, such as:
"Herrera" instead of "Herrera Trujillo"
"Mohd" instead of "Raza Hasan Mohd"

  • The following evidence can be accepted:

    • RTAY Recognition of Prior Competency

    • Rio Tinto Record of Completion

    • Progress Report

    • Theory Assessment or Site Authorisation
      All assessment pages within upload
      Matching competency name and code (if with checkbox, this should be completed)
      Applicant's signature and signed date
      Assessor's complete name, signature, and date
      Must show that the person is competent and authorised to operate

NOTE:

  • If Site Authorisation, the RCC Assessment or CTO Assessment section must be completed

  • If Theory Assessment, when RCC is completed, the authorised leader is required to verify with a signature that the applicant is authorised to operate

  • The learning and development section of the form does not need to be completed

Issue date = If a certificate has been provided, use the course completion date as issue date. If Theory Assessment or Site Authorisation, use the assessor's signature date.

Expiry date = 50 years from issue date


Hydraulic.Qualified.RTAY Portable Hydraulic Tool Oper (Thy); 31015985

  • First and last name must match applicant's name in Onsite

Shortened versions of first names are accepted, such as:
"Chris" instead of "Christopher"
"Wil" instead of "William"

Shortened versions of last names are accepted, such as:
"Herrera" instead of "Herrera Trujillo"
"Mohd" instead of "Raza Hasan Mohd"

  • The following evidence can be accepted:

    • RTAY Recognition of Prior Competency

    • Rio Tinto Record of Completion

    • Progress Report

    • Theory Assessment or Site Authorisation
      All assessment pages within upload
      Matching competency name and code (if with checkbox, this should be completed)
      Applicant's signature and signed date
      Assessor's complete name, signature, and date
      Must show that the person is competent and authorised to operate

NOTE:

  • If Site Authorisation, the RCC Assessment or CTO Assessment section must be completed

  • If Theory Assessment, when RCC is completed, the authorised leader is required to verify with a signature that the applicant is authorised to operate

  • The learning and development section of the form does not need to be completed

Issue date = If a certificate has been provided, use the course completion date as issue date. If Theory Assessment or Site Authorisation, use the assessor's signature date.

Expiry date = 50 years from issue date


Hydraulic.Qualified.RTAY Torque Tools (Prac) - Hydraulic; 30481126

  • First and last name must match applicant's name in Onsite

Shortened versions of first names are accepted, such as:
"Chris" instead of "Christopher"
"Wil" instead of "William"

Shortened versions of last names are accepted, such as:
"Herrera" instead of "Herrera Trujillo"
"Mohd" instead of "Raza Hasan Mohd"

  • The following evidence can be accepted:

    • RTAY Recognition of Prior Competency

    • Rio Tinto Record of Completion

    • Progress Report

    • Theory Assessment or Site Authorisation
      All assessment pages within upload
      Matching competency name and code (if with checkbox, this should be completed)
      Applicant's signature and signed date
      Assessor's complete name, signature, and date
      Must show that the person is competent and authorised to operate

NOTE:

  • If Site Authorisation, the RCC Assessment or CTO Assessment section must be completed

  • If Theory Assessment, when RCC is completed, the authorised leader is required to verify with a signature that the applicant is authorised to operate

  • The learning and development section of the form does not need to be completed

Issue date = If a certificate has been provided, use the course completion date as issue date. If Theory Assessment or Site Authorisation, use the assessor's signature date.

Expiry date = 5 years from issue date

Operator.Qualified.RTAY Amphiroll Operation; 30555010

  • First and last name must match applicant's name in Onsite

Shortened versions of first names are accepted, such as:
"Chris" instead of "Christopher"
"Wil" instead of "William"

Shortened versions of last names are accepted, such as:
"Herrera" instead of "Herrera Trujillo"
"Mohd" instead of "Raza Hasan Mohd"

  • The following evidence can be accepted:

    • RTAY Recognition of Prior Competency

    • Rio Tinto Record of Completion

    • Progress Report

    • Theory Assessment or Site Authorisation
      All assessment pages within upload
      Matching competency name and code (if with checkbox, this should be completed)
      Applicant's signature and signed date
      Assessor's complete name, signature, and date
      Must show that the person is competent and authorised to operate

NOTE:

  • If Site Authorisation, the RCC Assessment or CTO Assessment section must be completed

  • If Theory Assessment, when RCC is completed, the authorised leader is required to verify with a signature that the applicant is authorised to operate

  • The learning and development section of the form does not need to be completed

Issue date = If a certificate has been provided, use the course completion date as issue date. If Theory Assessment or Site Authorisation, use the assessor's signature date.

Expiry date = 5 years from issue date


Operator.Qualified.RTAY Brush Cutter Operation; 30670459

  • First and last name must match applicant's name in Onsite

Shortened versions of first names are accepted, such as:
"Chris" instead of "Christopher"
"Wil" instead of "William"

Shortened versions of last names are accepted, such as:
"Herrera" instead of "Herrera Trujillo"
"Mohd" instead of "Raza Hasan Mohd"

  • The following evidence can be accepted:

    • RTAY Recognition of Prior Competency

    • Rio Tinto Record of Completion

    • Progress Report

    • Theory Assessment or Site Authorisation
      All assessment pages within upload
      Matching competency name and code (if with checkbox, this should be completed)
      Applicant's signature and signed date
      Assessor's complete name, signature, and date
      Must show that the person is competent and authorised to operate

NOTE:

  • If Site Authorisation, the RCC Assessment or CTO Assessment section must be completed

  • If Theory Assessment, when RCC is completed, the authorised leader is required to verify with a signature that the applicant is authorised to operate

  • The learning and development section of the form does not need to be completed

Issue date = If a certificate has been provided, use the course completion date as issue date. If Theory Assessment or Site Authorisation, use the assessor's signature date.

Expiry date = 3 years from issue date

Operator.Qualified.RTAY Compress Gas-Oxy Cutting; 30413954

  • First and last name must match applicant's name in Onsite

Shortened versions of first names are accepted, such as:
"Chris" instead of "Christopher"
"Wil" instead of "William"

Shortened versions of last names are accepted, such as:
"Herrera" instead of "Herrera Trujillo"
"Mohd" instead of "Raza Hasan Mohd"

  • The following evidence can be accepted:

    • RTAY Recognition of Prior Competency

    • Rio Tinto Record of Completion

    • Progress Report

    • Site Authorisation
      All assessment pages within upload
      Matching competency name and code (if with checkbox, this should be completed)
      Applicant's signature and signed date
      Assessor's complete name, signature, and date
      Must show that the person is competent and authorised to operate

NOTE:

  • The RCC Assessment or CTO Assessment section must be completed

  • The learning and development section of the form does not need to be completed

Issue date = If a certificate has been provided, use the course completion date as issue date. If Theory Assessment or Site Authorisation, use the assessor's signature date.

Expiry date = 2 years from issue date

Operator.Qualified.RTAY Respirator - Disposable P2; 30923871

  • First and last name must match applicant's name in Onsite

Shortened versions of first names are accepted, such as:
"Chris" instead of "Christopher"
"Wil" instead of "William"

Shortened versions of last names are accepted, such as:
"Herrera" instead of "Herrera Trujillo"
"Mohd" instead of "Raza Hasan Mohd"

  • The following evidence can be accepted:

    • RTAY Recognition of Prior Competency

    • Rio Tinto Record of Completion

    • Progress Report

    • Theory Assessment or Site Authorisation
      All assessment pages within upload
      Matching competency name and code (if with checkbox, this should be completed)
      Applicant's signature and signed date
      Assessor's complete name, signature, and date
      Must show that the person is competent and authorised to operate

NOTE:

  • If Site Authorisation, the RCC Assessment or CTO Assessment section must be completed

  • If Theory Assessment, when RCC is completed, the authorised leader is required to verify with a signature that the applicant is authorised to operate

  • The learning and development section of the form does not need to be completed

Issue date = If a certificate has been provided, use the course completion date as issue date. If Theory Assessment or Site Authorisation, use the assessor's signature date.

Expiry date = 2 years from issue date

Operator.Qualified.RTAY Respirator - Full Face; 30923869

  • First and last name must match applicant's name in Onsite

Shortened versions of first names are accepted, such as:
"Chris" instead of "Christopher"
"Wil" instead of "William"

Shortened versions of last names are accepted, such as:
"Herrera" instead of "Herrera Trujillo"
"Mohd" instead of "Raza Hasan Mohd"

  • The following evidence can be accepted:

    • RTAY Recognition of Prior Competency

    • Rio Tinto Record of Completion

    • Progress Report

    • Respirator Fit Test Form with 'Full Face' check marked
    • Theory Assessment or Site Authorisation
      All assessment pages within upload
      Matching competency name and code (if with checkbox, this should be completed)
      Applicant's signature and signed date
      Assessor's complete name, signature, and date
      Must show that the person is competent and authorised to operate

NOTE:

  • If Site Authorisation, the RCC Assessment or CTO Assessment section must be completed

  • If Theory Assessment, when RCC is completed, the authorised leader is required to verify with a signature that the applicant is authorised to operate

  • The learning and development section of the form does not need to be completed

Issue date = If a certificate has been provided, use the course completion date as issue date. If Theory Assessment or Site Authorisation, use the assessor's signature date.

Expiry date = 2 years from issue date

Operator.Qualified.RTAY Respirator - Half Face; 30923870

  • First and last name must match applicant's name in Onsite

Shortened versions of first names are accepted, such as:
"Chris" instead of "Christopher"
"Wil" instead of "William"

Shortened versions of last names are accepted, such as:
"Herrera" instead of "Herrera Trujillo"
"Mohd" instead of "Raza Hasan Mohd"

  • The following evidence can be accepted:

    • RTAY Recognition of Prior Competency

    • Rio Tinto Record of Completion

    • Progress Report

    • Respirator Fit Test Form with 'Half Face' check marked
    • Theory Assessment or Site Authorisation
      All assessment pages within upload
      Matching competency name and code (if with checkbox, this should be completed)
      Applicant's signature and signed date
      Assessor's complete name, signature, and date
      Must show that the person is competent and authorised to operate

NOTE:

  • If Site Authorisation, the RCC Assessment or CTO Assessment section must be completed

  • If Theory Assessment, when RCC is completed, the authorised leader is required to verify with a signature that the applicant is authorised to operate

  • The learning and development section of the form does not need to be completed

ssue date = If a certificate has been provided, use the course completion date as issue date. If Theory Assessment or Site Authorisation, use the assessor's signature date.

Expiry date = 2 years from issue date

Operator.Qualified.RTAY Torque Tools (Thy); 31015979

  • First and last name must match applicant's name in Onsite

Shortened versions of first names are accepted, such as:
"Chris" instead of "Christopher"
"Wil" instead of "William"

Shortened versions of last names are accepted, such as:
"Herrera" instead of "Herrera Trujillo"
"Mohd" instead of "Raza Hasan Mohd"

  • The following evidence can be accepted:

    • RTAY Recognition of Prior Competency

    • Rio Tinto Record of Completion

    • Progress Report

    • Theory Assessment or Site Authorisation
      All assessment pages within upload
      Matching competency name and code (if with checkbox, this should be completed)
      Applicant's signature and signed date
      Assessor's complete name, signature, and date
      Must show that the person is competent and authorised to operate

NOTE:

  • If Site Authorisation, the RCC Assessment or CTO Assessment section must be completed

  • If Theory Assessment, when RCC is completed, the authorised leader is required to verify with a signature that the applicant is authorised to operate

  • The learning and development section of the form does not need to be completed

Issue date = If a certificate has been provided, use the course completion date as issue date. If Theory Assessment or Site Authorisation, use the assessor's signature date.

Expiry date = 50 years from issue date

Operator Grinder.Qualified.RTAY Operate Angle Grinder 5/7inch; 31129720
  • First and last name must match applicant's name in Onsite

Shortened versions of first names are accepted, such as:
"Chris" instead of "Christopher"
"Wil" instead of "William"

Shortened versions of last names are accepted, such as:
"Herrera" instead of "Herrera Trujillo"
"Mohd" instead of "Raza Hasan Mohd"

  • The following evidence can be accepted:

    • RTAY Recognition of Prior Competency

    • Rio Tinto Record of Completion

    • Progress Report

    • Theory Assessment or Site Authorisation
      All assessment pages within upload
      Matching competency name and code (if with checkbox, this should be completed)
      Applicant's signature and signed date
      Assessor's complete name, signature, and date
      Must show that the person is competent and authorised to operate

NOTE:

  • If Site Authorisation, the RCC Assessment or CTO Assessment section must be completed

  • If Theory Assessment, when RCC is completed, the authorised leader is required to verify with a signature that the applicant is authorised to operate

  • The learning and development section of the form does not need to be completed  

Issue date = If a certificate has been provided, use the course completion date as issue date. If Theory Assessment or Site Authorisation, use the assessor's signature date.

Expiry date = 2 years from issue date

Pneumatics.-.RTAY Torque Tools (Prac) - Pneumatic; 31094234
  • First and last name must match applicant's name in Onsite

Shortened versions of first names are accepted, such as:
"Chris" instead of "Christopher"
"Wil" instead of "William"

Shortened versions of last names are accepted, such as:
"Herrera" instead of "Herrera Trujillo"
"Mohd" instead of "Raza Hasan Mohd"

  • The following evidence can be accepted:

    • RTAY Recognition of Prior Competency

    • Rio Tinto Record of Completion

    • Progress Report

    • Theory Assessment or Site Authorisation
      All assessment pages within upload
      Matching competency name and code (if with checkbox, this should be completed)
      Applicant's signature and signed date
      Assessor's complete name, signature, and date
      Must show that the person is competent and authorised to operate

NOTE:

  • If Site Authorisation, the RCC Assessment or CTO Assessment section must be completed

  • If Theory Assessment, when RCC is completed, the authorised leader is required to verify with a signature that the applicant is authorised to operate

  • The learning and development section of the form does not need to be completed

Issue date = If a certificate has been provided, use the course completion date as issue date. If Theory Assessment or Site Authorisation, use the assessor's signature date.

Expiry date = 5 years from issue date


Gas.-.RTAY Compressed Gas theory (use maintain); 31130126

  • First and last name must match applicant's name in Onsite

Shortened versions of first names are accepted, such as:
"Chris" instead of "Christopher"
"Wil" instead of "William"

Shortened versions of last names are accepted, such as:
"Herrera" instead of "Herrera Trujillo"
"Mohd" instead of "Raza Hasan Mohd"

  • The following evidence can be accepted:

    • RTAY Recognition of Prior Competency

    • Rio Tinto Record of Completion

    • Progress Report

    • Theory Assessment or Site Authorisation
      All assessment pages within upload
      Matching competency name and code (if with checkbox, this should be completed)
      Applicant's signature and signed date
      Assessor's complete name, signature, and date
      Must show that the person is competent and authorised to operate

NOTE:

  • If Site Authorisation, the RCC Assessment or CTO Assessment section must be completed

  • If Theory Assessment, when RCC is completed, the authorised leader is required to verify with a signature that the applicant is authorised to operate

  • The learning and development section of the form does not need to be completed

Issue date = If a certificate has been provided, use the course completion date as issue date. If Theory Assessment or Site Authorisation, use the assessor's signature date.

Expiry date = 50 years from issue date

Gas.-.RTAY Contractor Gas Training Theory; 31474502, 31473999

  • First and last name must match applicant's name in Onsite

Shortened versions of first names are accepted, such as:
"Chris" instead of "Christopher"
"Wil" instead of "William"

Shortened versions of last names are accepted, such as:
"Herrera" instead of "Herrera Trujillo"
"Mohd" instead of "Raza Hasan Mohd"

  • The following evidence can be accepted:

    • RTAY Recognition of Prior Competency

    • Rio Tinto Record of Completion

    • Progress Report

    • Theory Assessment or Site Authorisation
      All assessment pages within upload
      Matching competency name and code (if with checkbox, this should be completed)
      Applicant's signature and signed date
      Assessor's complete name, signature, and date
      Must show that the person is competent and authorised to operate

NOTE:

  • If Site Authorisation, the RCC Assessment or CTO Assessment section must be completed

  • If Theory Assessment, when RCC is completed, the authorised leader is required to verify with a signature that the applicant is authorised to operate

  • The learning and development section of the form does not need to be completed

Issue date = If a certificate has been provided, use the course completion date as issue date. If Theory Assessment or Site Authorisation, use the assessor's signature date.

Expiry date = 2 years from issue date

Gas.-.RTAY Contractors Gas Work Competency Certification; 31474503

  • First and last name must match applicant's name in Onsite

Shortened versions of first names are accepted, such as:
"Chris" instead of "Christopher"
"Wil" instead of "William"

Shortened versions of last names are accepted, such as:
"Herrera" instead of "Herrera Trujillo"
"Mohd" instead of "Raza Hasan Mohd"

  • The following evidence can be accepted:

    • RTAY Recognition of Prior Competency

    • Rio Tinto Record of Completion

    • Progress Report

    • Theory Assessment or Site Authorisation
      All assessment pages within upload
      Matching competency name and code (if with checkbox, this should be completed)
      Applicant's signature and signed date
      Assessor's complete name, signature, and date
      Must show that the person is competent and authorised to operate

NOTE:

  • If Site Authorisation, the RCC Assessment or CTO Assessment section must be completed

  • If Theory Assessment, when RCC is completed, the authorised leader is required to verify with a signature that the applicant is authorised to operate

  • The learning and development section of the form does not need to be completed

Issue date = If a certificate has been provided, use the course completion date as issue date. If Theory Assessment or Site Authorisation, use the assessor's signature date.

Expiry date = 2 years from issue date

RTAY- Restricted Isolation Officer Course PT

Theory, 31070934

  • First and last name must match applicant's name in Onsite

Shortened versions of first names are accepted, such as:
"Chris" instead of "Christopher"
"Wil" instead of "William"

Shortened versions of last names are accepted, such as:
"Herrera" instead of "Herrera Trujillo"
"Mohd" instead of "Raza Hasan Mohd"

  • The following evidence can be accepted:

    • RTAY Recognition of Prior Competency

    • Rio Tinto Record of Completion

    • Progress Report

    • Theory Assessment or Site Authorisation
      All assessment pages within upload
      Matching competency name and code (if with checkbox, this should be completed)
      Applicant's signature and signed date
      Assessor's complete name, signature, and date
      Must show that the person is competent and authorised to operate

NOTE:

  • If Site Authorisation, the RCC Assessment or CTO Assessment section must be completed

  • If Theory Assessment, when RCC is completed, the authorised leader is required to verify with a signature that the applicant is authorised to operate

  • The learning and development section of the form does not need to be completed

Issue date = If a certificate has been provided, use the course completion date as issue date. If Theory Assessment or Site Authorisation, use the assessor's signature date.

Expiry date = 99 years from issue date




Expand
titlePlant Operation

Anchor
PandEPO
PandEPO

evidence can be accepted:
  • RTAY Recognition of Prior Competency

  • Rio Tinto Record of Completion

  • Progress Report

  • High Risk Work License/License to preform High Risk Work
    Both sides of card must be uploaded
    Applicant's name
    Issue and expiry dates
    Correct class listed
    License holder's signature on the back side of the form does not need to be completed
  • RTAY Recognition of Prior Competency

  • Rio Tinto Record of Completion

  • Progress Report

  • High Risk Work License/License to preform High Risk Work
    Both sides of card must be uploaded
    Applicant's name
    Issue and expiry dates
    Correct class listed
    License holder's signature on the back side Authorisation, use the assessor's signature date.

    Expiry date = 3 years from issue date

    CompetencyCompetency RequirementsUpload RequirementsExamples
    Operator.Qualified.RTAY Conduct Backhoe/loader Operation; 31088956
    • First and last name must match applicant's name in Onsite

    Shortened versions of first names are accepted, such as:
    "Chris" instead of "Christopher"
    "Wil" instead of "William"

    Shortened versions of last names are accepted, such as:
    "Herrera" instead of "Herrera Trujillo"
    "Mohd" instead of "Raza Hasan Mohd"

    • The following evidence can be accepted:

      • RTAY Recognition of Prior Competency

      • Rio Tinto Record of Completion

      • Progress Report

      • High Risk Work License/License to preform High Risk Work
        Both sides of card must be uploaded
        Applicant's name
        Issue and expiry dates
        Correct class listed
        License holder's signature on the back side

      • Theory Assessment or Site Authorisation
        All assessment pages within upload
        Matching competency name and code (if with checkbox, this should be completed)
        Current licence number and expiry date
        Applicant's signature and signed date
        Assessor's complete name, signature, and date
        Must show that the person is competent and authorised to operate

    NOTE:

    • If Site Authorisation, the RCC Assessment or CTO Assessment section must be completed

    • If Theory Assessment, when RCC is completed, the authorised leader is required to verify with a signature that the applicant is authorised to operate

    • The learning and development section of the form does not need to be completed

    Issue date = If a certificate has been provided, use the course completion date as issue date. If Theory Assessment or Site Authorisation, use the assessor's signature date.

    Expiry date = 2 years from issue date













    Operator Elevated Work Platform.Certificate.RTAY Elevated Work Platform Op; 30888997

    Operator Excavator.Qualified.RTAY Hydraulic Excavator Operation; 30932433

    Operator Forklift.Qualification.RTAY Forklift Operation; 30888995

    Operator Forklift.Qualified.RTAY Telehandler Operation-Forklift; 30932432

    Operator Front End Loader.Qualified.RTAY Front End Loader Operation; 30932435

    Operator Haul Truck.Qualified.RTAY Articulated Truck Operation - Haul Truck; 30807709

    Operator Scissor Lift.Qualified.RTAY Scissor Lift Operation; 30888999

    Operator Water Truck.Qualified.RTAY Articulated Truck Operation - Water Truck; 30902270

    Operator.Qualified.RTAY Skid Steer Loader Operation; 30888986

    • First and last name must match applicant's name in Onsite

    Shortened versions of first names are accepted, such as:
    "Chris" instead of "Christopher"
    "Wil" instead of "William"

    Shortened versions of last names are accepted, such as:
    "Herrera" instead of "Herrera Trujillo"
    "Mohd" instead of "Raza Hasan Mohd"

    • The following evidence can be accepted:

      • RTAY Recognition of Prior Competency

      • Rio Tinto Record of Completion

      • Progress Report

      • High Risk Work License/License to preform High Risk Work
        Both sides of card must be uploaded
        Applicant's name
        Issue and expiry dates
        Correct class listed
        License holder's signature on the back side

      • Theory Assessment or Site Authorisation
        All assessment pages within upload
        Matching competency name and code (if with checkbox, this should be completed)
        Current licence number and expiry date
        Applicant's signature and signed date
        Assessor's complete name, signature, and date
        Must show that the person is competent and authorised to operate

    NOTE:

    • If Site Authorisation, the RCC Assessment or CTO Assessment section must be completed

    • If Theory Assessment, when RCC is completed, the authorised leader is required to verify with a signature that the applicant is authorised to operate

    • The learning and development section of the form does not need to be completed

    Issue date = If a certificate has been provided, use the course completion date as issue date. If Theory Assessment or Site Authorisation, use the assessor's signature date.

    Expiry date = 3 years from issue date

    Operator Roller.Qualified.RTAY Conduct Roller Operation; 31299673

    Operator.Qualified.RTAY Skid Steer Loader Dingo/Kanga Op
    • First and last name must match applicant's name in Onsite

    Shortened versions of first names are accepted, such as:
    "Chris" instead of "Christopher"
    "Wil" instead of "William"

    Shortened versions of last names are accepted, such as:
    "Herrera" instead of "Herrera Trujillo"
    "Mohd" instead of "Raza Hasan Mohd"

    • The following evidence can be accepted:

      • RTAY Recognition of Prior Competency

      • Rio Tinto Record of Completion

      • Progress Report

      • Theory Assessment or Site Authorisation
        Matching competency name and code (if with checkbox, this should be completed)
        Current licence number and expiry date
        Applicant's signature and signed date
        Assessor's complete name, signature, and date
        Must show that the person is competent and authorised to operate

    NOTE:

    • If Site Authorisation, the RCC Assessment or CTO Assessment section must be completed

    • If Theory Assessment, when RCC is completed, the authorised leader is required to verify with a signature that the applicant is authorised to operate

    • The learning and development section of the form does not need to be completed

    Issue date = If a certificate has been provided, use the course completion date as issue date. If Theory Assessment or Site Authorisation, use the assessor's signature date.

    Expiry date = 2 years from issue date

    Operator Dozer.Qualified.RTAY Dozer Operation - Civil Works; 30888972

    • First and last name must match applicant's name in Onsite

    Shortened versions of first names are accepted, such as:
    "Chris" instead of "Christopher"
    "Wil" instead of "William"

    Shortened versions of last names are accepted, such as:
    "Herrera" instead of "Herrera Trujillo"
    "Mohd" instead of "Raza Hasan Mohd"

    • The following evidence can be accepted:

      • RTAY Recognition of Prior Competency

      • Rio Tinto Record of Completion

      • Progress Report

      • Theory Assessment or Site Authorisation
        All assessment pages within upload
        Matching competency name and code (if with checkbox, this should be completed)
        Current licence number and expiry date
        Applicant's signature and signed date
        Assessor's complete name, signature, and date
        Must show that the person is competent and authorised to operate

    NOTE:

    • If Site Authorisation, the RCC Assessment or CTO Assessment section must be completed

    • If Theory Assessment, when RCC is completed, the authorised leader is required to verify with a signature that the applicant is authorised to operate

    • The learning and development section of the form does not need to be completed

    Issue date = If a certificate has been provided, use the course completion date as issue date. If Theory Assessment or Site Authorisation, use the assessor's signature date.

    Expiry date = 2 years from issue date

    Operator Stockpile Dozer.-.RTAY Dozer Operation - Stockpile; 31080311

    • First and last name must match applicant's name in Onsite

    Shortened versions of first names are accepted, such as:
    "Chris" instead of "Christopher"
    "Wil" instead of "William"

    Shortened versions of last names are accepted, such as:
    "Herrera" instead of "Herrera Trujillo"
    "Mohd" instead of "Raza Hasan Mohd"

    • The following

    • evidence can be accepted:

      • RTAY Recognition of Prior Competency

      • Rio Tinto Record of Completion

      • Progress Report

      • Theory Assessment or Site Authorisation
        All assessment pages within upload
        Matching competency name and code (if with checkbox, this should be completed)
        Current licence number and expiry date
        Applicant's signature and signed date
        Assessor's complete name, signature, and date
        Must show that the person is competent and authorised to operate

    NOTE:

    • If Site Authorisation, the RCC Assessment or CTO Assessment section must be completed

    • If Theory Assessment, when RCC is completed, the authorised leader is required to verify with a signature that the applicant is authorised to operate

    • The learning and development section

    Issue date = If a certificate has been provided, use the course completion date as issue date. If Theory Assessment or Site Authorisation, use the assessor's signature date.

    Expiry date = 2 years from issue date

    Operator Elevated Work Platform.Certificate.RTAY Elevated Work Platform Op; 30888997

    Operator Excavator.Qualified.RTAY Hydraulic Excavator Operation; 30932433

    Operator Forklift.Qualification.RTAY Forklift Operation; 30888995

    Operator Forklift.Qualified.RTAY Telehandler Operation-Forklift; 30932432

    Operator Front End Loader.Qualified.RTAY Front End Loader Operation; 30932435

    Operator Haul Truck.Qualified.RTAY Articulated Truck Operation - Haul Truck; 30807709

    Operator Scissor Lift.Qualified.RTAY Scissor Lift Operation; 30888999

    Operator Water Truck.Qualified.RTAY Articulated Truck Operation - Water Truck; 30902270

    Operator.Qualified.RTAY Skid Steer Loader Operation; 30888986

    • of the form does not need to be completed

    Issue date = If a certificate has been provided, use the course completion date as issue date. If Theory Assessment or Site Authorisation, use the assessor's signature date.

    Expiry date = 2 years from issue date

    Heavy Vehicle.Licence.RTAY Heavy Rigid HR Truck Operation; 30888984, 30888982, 30888980, 30568790, 30410350
    • First and last name must match applicant's name in Onsite

    Shortened versions of first names are accepted, such as:
    "Chris" instead of "Christopher"
    "Wil" instead of "William"

    Shortened versions of last names are accepted, such as:
    "Herrera" instead of "Herrera Trujillo"
    "Mohd" instead of "Raza Hasan Mohd"

    • The following evidence can be accepted:

      • RTAY Recognition of Prior Competency

      • Rio Tinto Record of Completion

      • Progress Report

      • Theory Assessment or Site Authorisation
        All assessment pages within upload
        Matching competency name and code (if with checkbox, this should be completed)
        Current licence number and expiry date
        Applicant's signature and signed date
        Assessor's complete name, signature, and date
        Must show that the person is competent and authorised to operate

    NOTE:

    • If Site Authorisation, the RCC Assessment or CTO Assessment section must be completed

    • If Theory Assessment, when RCC is completed, the authorised leader is required to verify with a signature that the applicant is authorised to operate

    • The learning and development section of the form does not need to be completed

    Issue date = If a certificate has been provided, use the course completion date as issue date. If Theory Assessment or Site

    Operator Roller.Qualified.RTAY Conduct Roller Operation; 31299673

    Operator.Qualified.RTAY Skid Steer Loader Dingo/Kanga Op

    Operator Dozer.Qualified.RTAY Dozer Operation - Civil Works; 30888972

    Operator Stockpile Dozer.-.RTAY Dozer Operation - Stockpile; 31080311

    Heavy Vehicle.Licence.RTAY Heavy Rigid HR Truck Operation; 30888984, 30888982, 30888980, 30568790, 30410350

    Authorisation, use the assessor's signature date.

    Expiry date = 2 years from issue date

    Operator.Qualified.RTAY Non SlewCrane Operation; 30888978, 30524606
    • First and last name must match applicant's name in Onsite

    Shortened versions of first names are accepted, such as:
    "Chris" instead of "Christopher"
    "Wil" instead of "William"

    Shortened versions of last names are accepted, such as:
    "Herrera" instead of "Herrera Trujillo"
    "Mohd" instead of "Raza Hasan Mohd"

    • The following evidence can be accepted:

      • RTAY Recognition of Prior Competency

      • Rio Tinto Record of Completion

      • Progress Report

      • High Risk Work License/License to preform High Risk Work
        Both sides of card must be uploaded
        Applicant's name
        Issue and expiry dates
        Correct class listed
        License holder's signature on the back side

      • Theory Assessment or Site Authorisation
        All assessment pages within upload
        Matching competency name and code (if with checkbox, this should be completed)
        Current licence number and expiry date
        Applicant's signature and signed date
        Assessor's complete name, signature, and date
        Must show that the person is competent and authorised to operate

    NOTE:

    • If Site Authorisation, the RCC Assessment or CTO Assessment section must be completed

    • If Theory Assessment, when RCC is completed, the authorised leader is required to verify with a signature that the applicant is authorised to operate

    • For assessments that have been completed onsite, the form can only be signed off by Aaron Froude 

    • The learning and development section of the form does not need to be completedbe completed

    Avetta staff click here for additional business rule information prior to file verification

    Issue date = If a certificate has been provided, use the course completion date as issue date. If Theory Assessment or Site Authorisation, use the assessor's signature date.

    Expiry date = 2 years from issue date

    Operator.Qualified.RTAY Slewing Crane Operation 30888975
    Operator Crane.Qualified.RTAY LBG Crane Operation Thy; 30589500
    Operator Crane.Qualified.RTAYLBG Crane Operation Prac; 30888973
    • First and last name must match applicant's name in Onsite

    Shortened versions of first names are accepted, such as:
    "Chris" instead of "Christopher"
    "Wil" instead of "William"

    Shortened versions of last names are accepted, such as:
    "Herrera" instead of "Herrera Trujillo"
    "Mohd" instead of "Raza Hasan Mohd"

    • The following evidence can be accepted:

      • RTAY Recognition of Prior Competency

      • Rio Tinto Record of Completion

      • Progress Report

      • High Risk Work License/License to preform High Risk Work
        Both sides of card must be uploaded
        Applicant's name
        Issue and expiry dates
        Correct class listed
        License holder's signature on the back side

      • Theory Assessment or Site Authorisation
        All assessment pages within upload
        Matching competency name and code (if with checkbox, this should be completed)
        Current licence number and expiry date
        Applicant's signature and signed date
        Assessor's complete name, signature, and date
        Must show that the person is competent and authorised to operate

    NOTE:

    • If Site Authorisation, the RCC Assessment or CTO Assessment section must be completed

    • If Theory Assessment, when RCC is completed, the authorised leader is required to verify with a signature that the applicant is authorised to operate

    • For assessments that have been completed onsite, the form can only be signed off by Aaron Froude Froude 

    • The learning and development section of the form does not need to be completed

    Issue date = If a certificate has been provided, use the course completion date as issue date. If Theory Assessment or Site Authorisation, use the assessor's signature date.

    Expiry date = 3 years from issue date



    Expand
    titleMove and Test

    Anchor
    PandEMT
    PandEMT

    CompetencyCompetency RequirementsUpload RequirementsExamples

    Mechanical Plant.Qualified.RTAY Move and Test (Heavy Plant) - Amphiroll; 31153760

    Rule to be confirmed by client

    Mechanical Plant.Qualified.RTAY Move and Test (Heavy Plant) - Articulated Haul Trucks; 31152009

    Rule to be confirmed by client

    Mechanical Plant.Qualified.RTAY Move and Test (Heavy Plant) - Bobcat skidsteer; 31153721

    Rule to be confirmed by client

    Mechanical Plant.Qualified.RTAY Move and Test (Heavy Plant) - Bull Dozer; 31152005

    Rule to be confirmed by client

    Mechanical Plant.Qualified.RTAY Move and Test (Heavy Plant) - Excavator; 31152007

    Rule to be confirmed by client

    Mechanical Plant.Qualified.RTAY Move and Test (Heavy Plant) - Front end Loader; 31152008

    Rule to be confirmed by client

    Mechanical Plant.Qualified.RTAY Move and Test (Heavy Plant) - Road Grader; 31152006

    Rule to be confirmed by client

    Mechanical Plant.Qualified.RTAY Move and Test (Heavy Plant) - Road roller; 31152010

    Rule to be confirmed by client