Competency | Competency Requirements | Upload Requirements | Examples |
---|
Education.Trade.Mechanical Certificate | • certificate - document to match the person registered
• Relevant Trade or Craft certificate in mechanical trade to be uploaded • - (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
- Must be issued by an RTO or Australian Government Appointed Authority
- Actual copy of document is required
- Course title and associated level to be listed on certificate
Accepted examples of course titles to be displayed: - Engineering - Mechanical Trade
- Engineering - Mechanical Trade (Fitting/machining)
- Engineering Tradesperson (Mechanical) (Fitting)
- Diesel Fitting
- Diesel Fitting ( Pathway )
- Mechanical Fitter
- Mechanical Trade (Maintenance) - Fitting and / or Turning Pathway
- Fitter and Turner or Mechanical
- Fitter and Machinist
- MEM30219 (Or any previous superseded equivalent course codes shown against the mapping of this course on training.gov.au)
- Diploma of Professional Practice (Engineering)
- Light Vehicle Mechanical Technology
NOT accepted examples of course titles to be displayed: - Motor or Automotive Mechanic
Accepted document types include: - Completion of Trade
- Completion of Apprenticeship
- Certificate of Proficiency
- Trade Certificate
- Certificate of Completion
- Certificate of Qualification
- Certificate IV
- Australian Recognised Trade Certificate
- Craft certificates will be escalated to site for approval
- Site contract for craft certificate approval
Note: Other equivalent competency codes may be accepted with approval • from Fitzroy - Document / Certificate / Number to be listed
- Black and white or colour is acceptable
• Must - Scanned document to be clearly
scanned and • Site contract for craft certificate approval | • - Scanned document to be clearly legible
• - Documentation which has been found to be subject to alterations will not be accepted.
• : Not Required- to be recorded as shown on document
|
|
Electrical.Licence.Electrical Contractors Licence (QLD) | • Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). • The uploaded evidence will show indication that the applicant is an Electrician • Evidence will be issued bu the Electrical Workers Registration Board • Must be current • Only require front of licence as mandatory • Colour copy OR black and white copy is acceptable | • Scanned document to be clearly legible • Documentation which has been found to be subject to alterations will not be accepted. • Issue Date: Not Required • Expiry Date: As shown on the lic |
|
Electrical.Statement of Attainment.EEHA - Electrical Equipment in Hazardous Areas | • - Name on certificate to match the person registered
• - Statement of Attainment to contain the following units as a minimum:
UEENEEM091A, UEENEEM023A, UEENEEM027A, UEENEEM038A, UEENEEM042A, UEENEEM043A, UEENEEM08A • - UEENEEM043AorUEEHA0001 or UEEHA0020 - Conduct detailed inspection of electrical installations for hazardous areas
- UEENEEM042A orUEEHA0002 or UEEHA0038 - Conduct visual and close inspection of electrical installations for hazardous areas
- UEENEEM080A orUEEHA0003 or UEEHA0022 - Determine the explosion-protection requirements to meet a specified classified hazardous area
- UEENEEM038A AND UEENEEM019A orUEEHA0004 - Enter a classified hazardous area to undertake work related to electrical equipment
- UEENEEM023A or UEEHA0005 or UEEHA0025 - Install explosion-protected equipment and associated apparatus and wiring systems
- UEENEEM027A orUEEHA0006 or UEEHA0026 - Maintain equipment associated with hazardous areas
- Must be issued by an RTO with Nationally Recognised Training logo
• - Black and white or colour is acceptable
• - Scanned document to be clearly legible
• - Declaration Form to be uploaded (separately) to confirm the evidence is a true and accurate record and representation of the worker’s training and competency
.• | - Issue Date = date achieved
• - Expiry Date = 3 Years from issue date
• - Declaration Form = See ‘Evidence Requirements’ for additional information
- If a letter is submitted:
- Issue Date = processed date
- Expiry Date = four months from processed date
| |
Education.Trade.Fabrication Certificate | - Name on document to match the person registered (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
- Must be issued by an RTO or Australian Government Appointed Authority
- Actual copy of document is required
- Course title and associated level to be listed on certificate
|
|
|
Cert III in Engineering – Fabrication Trade | - Engineering – Fabrication
- Engineering Tradesperson (Fabrication/Boilermaking)
- MEM31922 (Or any previous superseded equivalent course codes shown against the mapping of this course on training.gov.au)
NOT accepted examples of course titles to be displayed: - Motor or Automotive Mechanic
Accepted document types include: |
|
|