Competency | Competency Requirements | Upload Requirements | Examples | |||||
---|---|---|---|---|---|---|---|---|
Electrical.Apprentice.Apprenticeship Training Contract as an Electrician from the Australian Apprenticeship Centre |
|
| ||||||
Electrical.Authorised.Previously authorised with Category 1 – Disconnect and Reconnect as at the 30 December 2016 2016 |
NOTE: Movement of Point of Attachment training is not required if combined with CAT 3 training in overhead service mains.
NOTE: An ASP Authorisation card showing class 2A and 2D is accepted in lieu of the above requirements providing it is still current and has been issued by an NSW distribution network operator (Ausgrid, Essential Energy or Endeavour Energy). |
| ||||||
Electrical.Certificate III.UET30612 - Certificate III in ESI - Power Systems - Distribution Overhead (Linesman) |
| The date of completion on the evidence should be recorded as the Issue Date in Pegasus | ||||||
Electrical. Certificate III. UEE30811 - Certificate III in Electrotechnology Electrician |
| The date of completion on the evidence should be recorded as the Issue Date in Pegasus | ||||||
Electrical.Certificate III.UET30812 - Certificate III in ESI - Power Systems - Distribution Cable Jointing |
· Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and· If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. · Documentation which has been found to be subject to alterations will not be accepted. · RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment · Recognised Training Institution’s name to be displayed on document. · Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. · Completion date or issue date must be displayed .· Course title and associated level to be listed on certificate to match the nominated coding and title within Pegasus Document / Certificate / Number · No expiry .· Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.
For overseas / international engineering qualifications to be accepted they need to either be recognised under the:
· Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements. org ORorg OR; · Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification | The date of completion on the evidence should be recorded as the Issue Date in Pegasus | ||||||
Electrical.Induction.Ausgrid’s Electrical Safety Rules (ESRs) | Applicants name should be displayed on the evidence and should match the applicant name that's registered in Onsite (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. The uploaded evidence will show completion of: Ausgrid’s Electrical Safety Rules (ESRs) | The date of completion on the evidence should be recorded as the Issue Date in Pegasus | ||||||
Electrical.Qualified.Electrical Certificate or Licence | When Certificate is uploaded:
When Licence is uploaded:
When remittance or receipt (For new contractor Licence) has been uploaded:
| When certificate is uploaded:
When Licence is uploaded:
When remittance or receipt (For new contractor Licence) has been uploaded:
| ||||||
Electrical.Licence.NSW | When Licence is uploaded:
When remittance or receipt (For new contractor Licence) has been uploaded:
| When Licence is uploaded:
When remittance or receipt (For new contractor Licence) has been uploaded:
| ||||||
Electrical.Licence.Electrical Contractors Licence endorsed with a (Q) | When Licence is uploaded:
· Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. · If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. · Documentation which has been found to be subject to alterations will not be accepted. · Must be an electrical contractors licence showing 'Q'. · Screenshots from websites are not accepted - Must be copy of the Licence · Must be issued by a relevant Australian state government authority with corresponding logo shown on licence. i.e. NSW Department of Fair Trading Black and white or coloured copy of evidence can be accepted When remittance or receipt (For new contractor Licence) has been uploaded:
When Licence is uploaded: . |
| ||||||
Electrical.Licence.Electrical Supervisors Licence | · Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. · If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. · Documentation which has been found to be subject to alterations will not be accepted. · Must be an electrical licence showing 'Supervisor Certificate'. · Screenshots from websites are not accepted - Must be copy of the Licence · Must be issued by a relevant Australian state government authority with corresponding logo shown on licence. i.e. NSW Department of Fair Trading |
When remittance or receipt (For new contractor Licence) has been uploaded:
Electrical.Licence.Electrical Supervisors Licence When Licence is uploaded: Applicants name should be displayed on the evidence | ||||||
Electrical.Statement of Attainment.UETTDRIS60A - Install and replace power system energy meters and associated equipment | · Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. When remittance or receipt (for new contractor licence) has been uploaded:
When Licence is uploaded:
When remittance or receipt (For new contractor Licence) has been uploaded:
| Electrical.Statement of Attainment.UETTDRIS60A - Install and replace power system energy meters and associated equipment |
NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details. NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code. | The date of completion on the evidence should be recorded as the Issue Date in Pegasus | Electrical.Statement of Attainment.UETTDRCJ21A – Lay ESI cables | · If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. · Documentation which has been found to be subject to alterations will not be accepted. · Statement of Attainment showing the relevant unit of competency must be uploaded. · Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document. · Statement of Attainment must comply with ASQA Requirements per: · Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.
NOTE: Ausgrid will accept Cat 4 - Metering & Energising approved industry training for persons who have been authorised with Ausgrid prior to 31 December 2015.
NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details. NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code | The date of completion on the evidence should be recorded as the Issue Date in Pegasus | |
Electrical.Statement of Attainment.UETTDRCJ21A – Lay ESI cables |
· Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. · If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. · Documentation which has been found to be subject to alterations will not be accepted. · Statement of Attainment showing the relevant unit of competency must be uploaded. · Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document. · Statement of Attainment must comply with ASQA Requirements per: NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details. NOTE· Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it it has been issued by an RTO and indicates completion of a nationally recognised unit code. | The date of completion on the evidence should be recorded as the Issue Date in Pegasus | ||||||
Electrical.Statement of Attainment.UETTDRCJ22A – Install and maintain de-energised low voltage underground paper insulated cables | · Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. · If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. · Documentation which has been found to be subject to alterations will not be accepted. · Statement of Attainment showing the relevant unit of competency must be uploaded. · Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document. · Statement of Attainment must comply with ASQA Requirements per: NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details. NOTE· Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it it has been issued by an RTO and indicates completion of a nationally recognised unit code. | The date of completion on the evidence should be recorded as the Issue Date in Pegasus | ||||||
Electrical.Statement of Attainment.UETTDRCJ23A – Install and maintain de-energised high voltage underground paper insulated cables | · Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. · If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. · Documentation which has been found to be subject to alterations will not be accepted. · Statement of Attainment showing the relevant unit of competency must be uploaded. · Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document. · Statement of Attainment must comply with ASQA Requirements per: NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details. NOTE· Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it it has been issued by an RTO and indicates completion of a nationally recognised unit code. | The date of completion on the evidence should be recorded as the Issue Date in Pegasus | ||||||
Electrical.Statement of Attainment.UETTDRCJ26A – Install and maintain de-energised low voltage underground polymeric cables | · Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. · If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. · Documentation which has been found to be subject to alterations will not be accepted. · Statement of Attainment showing the relevant unit of competency must be uploaded. · Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document. · Statement of Attainment must comply with ASQA Requirements per: NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details. NOTE· Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it it has been issued by an RTO and indicates completion of a nationally recognised unit code. | The date of completion on the evidence should be recorded as the Issue Date in Pegasus | ||||||
Electrical.Statement of Attainment.UETTDRCJ27A – Install and maintain de-energised high voltage underground polymeric cables | · Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. · If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. · Documentation which has been found to be subject to alterations will not be accepted. · Statement of Attainment showing the relevant unit of competency must be uploaded. · Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document. · Statement of Attainment must comply with ASQA Requirements per: NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details. NOTE· Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it it has been issued by an RTO and indicates completion of a nationally recognised unit code. | The date of completion on the evidence should be recorded as the Issue Date in Pegasus | ||||||
Electrical.Statement of Attainment.UETTDREL14 - Working safely near live electrical apparatus as a non electrical worker | · Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. · If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. · Documentation which has been found to be subject to alterations will not be accepted. · Statement of Attainment showing the relevant unit of competency must be uploaded. · Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document. · Statement of Attainment must comply with ASQA Requirements per: · Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. · Is valid for 12 months from date of completion. · Must be current. · Australian Electricity Supply Industry (ESI) issued skills passport is accepted. · Uploaded document must include page of passport that shows ‘UETTDREL14‘UETTDREL14A - Working safely near live electrical apparatus as a non-electrical worker’worker’ as having been achieved with: o Ausgrid stamp being shown on this page o Date of Training o Trainer / Assessor Name & Signature o Signature
NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details. NOTE NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code. NOTE: All ASP1s - Ausgrid’s Electrical Safety Rules (ESRs) training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised. NOTE: All ASP2s must complete their initial Ausgrid Electrical Safety Rules (ESR) training with Ausgrid’s Training Group. After the initial training the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned training. The date of completion on the evidence should be recorded as the Issue Date in Pegasus | · Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4-week expiry for this documentation). | ||||||
Electrical.Statement of Attainment.UETTDREL16 - Working safely near live electrical apparatus | · Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. Statement of Attainment showing the· If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. · Documentation which has been found to be subject to alterations will not be accepted. · Statement of Attainment showing the relevant unit of competency must be uploaded. · Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document. · Statement of Attainment must comply with ASQA Requirements per: · Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. · Australian Electricity Supply Industry (ESI) issued skills passport is accepted. · Uploaded document must include page of passport that shows ‘UETTDREL16‘UETTDREL16A - Working safely near live electrical apparatus’apparatus’ as having been achieved with: o Ausgrid stamp being shown on this page o Date of Training o Trainer / Assessor Name & Signature o Signature
NOTE: RTO Training Cards are accepted in lieu of statement of NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details. NOTE NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code. NOTE: All ASP1s - Ausgrid’s Electrical Safety Rules (ESRs) training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised. NOTE: All ASP2s must complete their initial Ausgrid Electrical Safety Rules (ESR) training with Ausgrid’s Training Group. After the initial training the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned training. | The date of completion on the evidence should be recorded as the Issue Date in Pegasus | Electrical.Statement of Attainment.UETTDRIS55A – | The date of completion on the evidence should be recorded as the Issue Date in Pegasus | ||||
Electrical.Statement of Attainment.UETTDRIS55A – Install and maintain low voltage underground services | · Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. Statement of Attainment showing the relevant· If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. · Documentation which has been found to be subject to alterations will not be accepted. · Statement of Attainment showing the relevant unit of competency must be uploaded. · Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document. · Statement of Attainment must comply with ASQA Requirements per: NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details. NOTE· Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it it has been issued by an RTO and indicates completion of a nationally recognised unit code. | The date of completion on the evidence should be recorded as the Issue Date in Pegasus | ||||||
Electrical.Statement of Attainment.UETTDRIS56A – Install and maintain low voltage overhead services | · Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. · If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. · Documentation which has been found to be subject to alterations will not be accepted. · Statement of Attainment showing the relevant unit of competency must be uploaded. · Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document. · Statement of Attainment must comply with ASQA Requirements per: NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details. NOTE· Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.
NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it it has been issued by an RTO and indicates completion of a nationally recognised unit code. | The date of completion on the evidence should be recorded as the Issue Date in Pegasus | ||||||
Electrical.Statement of Attainment.UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work | · Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. · If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. · Documentation which has been found to be subject to alterations will not be accepted. · Statement of Attainment showing the relevant unit of competency must be uploaded. · Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document. · Statement of Attainment must comply with ASQA Requirements per: Australian Electricity· Is valid for 12 months from date of completion. · Must be current. · Australian Electricity Supply Industry (ESI) issued skills passport is accepted. · Uploaded document must include page of passport that shows ‘UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work’ as having been achieved with: o Ausgrid stamp being shown on this page o Date of Training o Trainer / Assessor Name o& Signature · Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid specificaligned version of ‘UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work’ has been completed.
NOTE: RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details. NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code.
NOTE: All ASP1s - Ausgrid’s Electrical Safety Rules (ESRs) training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised.
NOTE: All ASP2s must complete their initial Ausgrid Electrical Safety Rules (ESR) training with Ausgrid’s Training Group. After the initial training the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned training. The date of completion on the evidence should | · Expiry date to be recorded as the Issue Date in Pegasus1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4-week expiry for this documentation). | ||||||
Electrical.Statement of Attainment.UETTDRRF02 - Perform Pole Top Rescue | · Mandatory if an individual is required to conduct or observe work near overhead mains from a ladder or pole. · Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. · If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. · Documentation which has been found to be subject to alterations will not be accepted. · Statement of Attainment showing the relevant unit of competency must be uploaded. · Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document. · Statement of Attainment must comply with ASQA Requirements per: · Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. · Is valid for 12 months from date of completion. · Must be current. · Australian Electricity Supply Industry (ESI) issued skills passport is accepted. · Uploaded document must include page of passport that shows ‘UETTDRRF02‘UETTDRRF02B - Perform Pole Top Rescue' aspole top rescue’ as having been achieved with: o Ausgrid stamp being shown on this page o Date of Training o Trainer / Assessor Name o Signature Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid specific version of ‘UETTDRRF02 - Perform Pole Top Rescue’ has been completed.& Signature
NOTE: RTORTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details. NOTENOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code. NOTE: All ASP1s - Ausgrid’s Electrical Safety Rules (ESRs) training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised. NOTE: All ASP2s must complete their initial Ausgrid Electrical Safety Rules (ESR) training with Ausgrid’s Training Group. After the initial training the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned training.
| The date of completion on the evidence should be recorded as the Issue Date in Pegasus | Electrical.Statement of Attainment.UETTDRRF03 - Perform EWP rescue | Applicants name should be displayed on the evidence | · Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4-week expiry for this documentation). | |||
Electrical.Statement of Attainment.UETTDRRF03 - Perform EWP rescue |
· Mandatory if an individual is required to conduct or observe work near overhead mains from an EWP. · Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. Statement of Attainment showing the· If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. · Documentation which has been found to be subject to alterations will not be accepted. · Statement of Attainment showing the relevant unit of competency must be uploaded. · Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document. · Statement of Attainment must comply with ASQA Requirements per: · Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. · Is valid for 12 months from date of completion. · Must be current. · Australian Electricity Supply Industry (ESI) issued skills passport is accepted. · Uploaded document must include page of passport that shows ‘UETTDRRF03‘UETTDRRF03B - Perform EWP rescue’ as having been achieved with: o Ausgrid stamp being shown on this page o Date of Training o Trainer / Assessor Name o Signature
& Signature
NOTE: RTORTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details .NOTENOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code .NOTE: All ASP1s - Ausgrid’s Electrical Safety Rules (ESRs) training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised. NOTE: All ASP2s must complete their initial Ausgrid Electrical Safety Rules (ESR) training with Ausgrid’s Training Group. After the initial training the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned training.
| The date of completion on the evidence should be recorded as the Issue Date in Pegasus | Electrical. | · Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4-week expiry for this documentation). | ||||
Electrical.Statement of Attainment.UETTDRRF06 - Perform rescue from a live LV panel | · Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. Statement of Attainment showing the relevant· If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. · Documentation which has been found to be subject to alterations will not be accepted. · Statement of Attainment showing the relevant unit of competency must be uploaded. · Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document. · Statement of Attainment must comply with ASQA Requirements per: · Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. · Is valid for 12 months from date of completion. · Must be current. · Australian Electricity Supply Industry (ESI) issued skills passport is accepted. · Uploaded document must include page of passport that shows ‘UETTDRRF06‘UETTDRRF06B - Perform rescue from a live LV panel’panel’ as having been achieved with: o Ausgrid stamp being shown on this page o Date of Training o Trainer / Assessor Name o Signature Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid specific version of ‘UETTDRRF06 - Perform rescue from a live LV panel’ has been completed.& Signature
NOTE: RTO RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details. NOTE NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code. NOTE: All ASP1s - Ausgrid’s Electrical Safety Rules (ESRs) training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised. NOTE: All ASP2s must complete their initial Ausgrid Electrical Safety Rules (ESR) training with Ausgrid’s Training Group. After the initial training the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned training.
The date of completion on the evidence should be recorded as the Issue Date in Pegasus | · Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4-week expiry for this documentation). | ||||||
Electrical.Statement of Attainment.UETTDRRF08 - Perform EWP controlled descent escape | Applicants name should be displayed on · Mandatory if an individual is required to conduct work near overhead mains utilising an EWP. · If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. · Documentation which has been found to be subject to alterations will not be accepted. · Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. · Statement of Attainment showing the relevant unit of competency must be uploaded. · Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document. · Statement of Attainment must comply with ASQA Requirements per: · Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. · Is valid for 12 months from date of completion. · Must be current. · Australian Electricity Supply Industry (ESI) issued skills passport is accepted. · Uploaded document must include page of passport that shows ‘UETTDRRF08‘UETTDRRF08B - Perform EWP controlled descent escape’escape’ as having been achieved with: o Ausgrid stamp being shown on this page o Date of Training o Trainer / Assessor Name o Signature Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid specific version of ‘UETTDRRF08 - Perform EWP controlled descent escape’ has been completed.& Signature
NOTE: RTO RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details. NOTE NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code. NOTE: All ASP1s - Ausgrid’s Electrical Safety Rules (ESRs) training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised. NOTE: All ASP2s must complete their initial Ausgrid Electrical Safety Rules (ESR) training with Ausgrid’s Training Group. After the initial training the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned training.
| The date of completion on the evidence should be recorded as the Issue Date in Pegasus | Electrical.Statement of Attainment.UETTDRRF09 - Apply | · Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4-week expiry for this documentation). | ||||
Electrical.Statement of Attainment.UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure | · Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. · If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. · Documentation which has been found to be subject to alterations will not be accepted. · Statement of Attainment showing the relevant unit of competency must be uploaded. · Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document. · Statement of Attainment must comply with ASQA Requirements per: · Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. · Is valid for 12 months from date of completion. · Must be current. · Australian Electricity Supply Industry (ESI) issued skills passport is accepted. · Uploaded document must include page of passport that shows ‘UETTDRRF09‘UETTDRRF09B - Apply access procedures to work on or near electrical network infrastructure’infrastructure’ as having been achieved with: o Ausgrid stamp being shown on this page o Date of Training o Trainer / Assessor Name o Signature Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid specific version of ‘UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure’ has been completed.& Signature
NOTE: RTO RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details. NOTE NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code. NOTE: All ASP1s - Ausgrid’s Electrical Safety Rules (ESRs) training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised. NOTE: All ASP2s must complete their initial Ausgrid Electrical Safety Rules (ESR) training with Ausgrid’s Training Group. After the initial training the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned training.
| The date of completion on the evidence should be recorded as the Issue Date in Pegasus | Electrical.Statement of Attainment.UETTDRRF10 - First Aid in an ESI Environment | Applicants name should be displayed on the evidence and | · Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4-week expiry for this documentation). | |||
Electrical.Statement of Attainment.UETTDRRF10 - First Aid in an ESI Environment | · Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. · If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. · Documentation which has been found to be subject to alterations will not be accepted. · Statement of Attainment showing the relevant unit of competency must be uploaded. · Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document. · Statement of Attainment must comply with ASQA Requirements per: · Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. · Is valid for 12 months from date of completion. · Must be current. · Australian Electricity Supply Industry (ESI) issued skills passport is accepted. · Uploaded document must include page of passport that shows ‘UETTDRRF10 - First Aid‘UETTDRRF10B - Provide first aid in an ESI Environment’environment’ as having been achieved with: o Ausgrid stamp being shown on this page o Date of Training o Trainer / Assessor Name o Signature Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid specific version of ‘UETTDRRF10 - First Aid in an ESI Environment’ has been completed.& Signature
NOTE: RTO RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details. NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code. NOTE: All ASP1s - Ausgrid’s Electrical Safety Rules (ESRs) training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised. NOTE: All ASP2s must complete their initial Ausgrid Electrical Safety Rules (ESR) training with Ausgrid’s Training Group. After the initial training the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned training.
| The date of completion on the evidence should be recorded as the Issue Date in Pegasus | Electrical.Statement of Attainment.UETTDRRF11A – Testing of Connections to LV Electricity Networks | Applicants name should be displayed on the evidence and should
| Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4-week expiry for this documentation). | |||
Electrical.Statement of Attainment.UETTDRRF11A – Testing of Connections to LV Electricity Networks | · Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. · If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. · Documentation which has been found to be subject to alterations will not be accepted. · Statement of Attainment showing the relevant unit of competency must be uploaded. · Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document. · Statement of Attainment must comply with ASQA Requirements per: · Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. · Is valid for 12 months from date of completion. · Must be current. · Australian Electricity Supply Industry (ESI) issued skills passport is accepted. · Uploaded document must include page of passport that shows ‘UETTDRRF11A‘UETTDRRF11A – Testing of Connections to LV Electricity Networks’connections to low voltage electricity networks’ as having been achieved with: o Ausgrid stamp being shown on this page o Date of Training o Trainer / Assessor Name o Signature Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid specific version of ‘UETTDRRF11A – Testing of Connections to LV Electricity Networks’ has been completed.& Signature
NOTE: RTO RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details. NOTE NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code. NOTE: All ASP1s - Ausgrid’s Electrical Safety Rules (ESRs) training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised. NOTE: All ASP2s must complete their initial Ausgrid Electrical Safety Rules (ESR) training with Ausgrid’s Training Group. After the initial training the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned training.
The date of completion on the evidence should be recorded as the Issue Date in Pegasus No Expiry Dateapplicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code | · Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4-week expiry for this documentation). | ||||||
Electrical.Qualified.UEENEEK142A Apply environmentally and sustainable procedures in the energy sector or Cat 4 - Metering & Energising | · Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. · If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. · Documentation which has been found to be subject to alterations will not be accepted. · The uploaded evidence must show completion of UEENEEK142A Apply environmentally and sustainable procedures in the energy sector or Cat 4 - Metering & Energising. · Australian Electricity Supply Industry (ESI) issued skills passport is accepted for Cat 4 - Metering & Energising. · Uploaded document must include page of passport that shows ‘Cat 4 - Metering & Energising’ as having been achieved with: o Ausgrid stamp being shown on this page o Date of Training o Trainer / Assessor Name & Signature · Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. | The date of completion on the evidence should be recorded as the Issue Date in Pegasus No Expiry Date |