Page History

• Applicants name to be shown on documentation
• Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)

Required evidence to be uploaded is a form of acceptable evidence that is acceptable for any of the following competencies respective business rule:

• Network Operator.Access.SC1000A - Ausgrid - Substation Entry

• Record the Issue date within Onsite:
  • Completion date - if listed on certificate (this completion date is always used when displayed)
  • Issue date - If only an issue date is listed please enter this as the issue date
• NO EXPIRY DATE

• Applicants name to be shown on documentation
• Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)

Required evidence to be uploaded is a form of acceptable evidence that is acceptable for any of the following competencies respective business rule: Network Operator.Access.APR0068 - Ausgrid - Access Permit

• Record the Issue date within Onsite:
  • Completion date - if listed on certificate (this completion date is always used when displayed)
  • Issue date - If only an issue date is listed please enter this as the issue date
• NO EXPIRY DATE

Network Operator.Access.APR0068 - Ausgrid - Access Permit Recipient (Restricted)

APR0068 - Ausgrid - Access Permit Recipient (Restricted)

• Applicants name to be shown on documentation
• Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)

For Ausgrid Training Passport

Uploaded document must also include page of passport that shows ‘Ausgrid - Access Permit Recipient (Restricted)’ as having been achieved with:

• Ausgrid / Energy Australia stamp being shown on this page
• Date of Training
• Trainer / Assessor Name
• Signature

If an applicant submits documentation that references 'unrestricted' this may be accepted

NOTE: If there is a signed sticker instead of a stamp with the trainers name with the relevant competency listed, it can be approved

For Pegasus LMS Issued Certificate:

• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Certificate will show completion of either: Access Permit Recipient (APR) Refresher OR Access Permit Recipient (APR) Restricted
  
• Certificate will show both Pegasus and Ausgrid Logos
• Date of completion will be shown

• Record the Issue date within Onsite:
  • Completion date - if listed on certificate (this completion date is always used when displayed)
  • Issue date - If only an issue date is listed please enter this as the issue date
• Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).

Operator.Statement of Attainment.Conduct civil construction excavator operations

•  Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.
• RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
• Recognised Training Institution’s name to be displayed on document.
• A Statement of Attainment must be submitted. Letters are not accepted in lieu of this.
• Completion date or issue date must be displayed
• Accepted Course Titles / Codes:
• RIIMPO320F
• RIIMPO320E
• RIIMPO320D
• RIIMPO320B
• RIIMPO320A
• No expiry
• Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Expiry date = none

Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:

• Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant

Uploaded document must also include page of passport that shows ‘Substation Entry’ as having been achieved with:

• Ausgrid / Energy Australia stamp being shown on this page
• Date of Training
• Trainer / Assessor Name
• Signature

NOTE: If there is a signed sticker instead of a stamp with the trainers name with the relevant competency listed, it can be approved

For Pegasus LMS Issued Certificate:

• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Certificate will show completion of either: Substation Entry
  
• Certificate will show both Pegasus and Ausgrid Logos
• Date of completion will be shown

• Record the Issue date within Onsite:
  • Completion date - if listed on certificate (this completion date is always used when displayed)
  • Issue date - If only an issue date is listed please enter this as the issue date

• Applicants name to be shown on documentation
• Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
• Course code to be listed on certificate to match the nominated coding and title within Onsite: AMGS0001 - Field Recording of Network Assets
• No expiry

• Record the Issue date within Onsite:
  • Completion date - if listed on certificate (this completion date is always used when displayed)
  • Issue date - If only an issue date is listed please enter this as the issue date

• Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:
  • Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant.

• Uploaded document must also include page of passport that shows ‘Environmental’ or Enviro as having been achieved with:
  • Ausgrid / Energy Australia stamp being shown on this page
  • Date of Training
  • Trainer / Assessor Name
  • Signature
    
    

NOTE: If there is a signed sticker instead of a stamp with the trainers name with the relevant competency listed, it can be approved

• Ausgrid Certificate of Completion or screenshot of training is accepted. It must show:
  • Environmental Management and Sustainability or Environmental Awareness Assessment
  • Contractors Name
• Date of completion
  
  
  Ausgrid Placeholder Document now accepted for ASP2's. It must show:
•  Contractors Name
• Date of completion
• Declaration of competence for Network Operator.Certificate.I0102 - Ausgrid - Environmental Awareness
• Name of Authoriser along with date 
  
  

For Pegasus LMS Issued Certificate:

• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Certificate will show completion of either: Electrical Safety Rules Initial OR Electrical Safety Rules Refresher
• Certificate will show both Pegasus and Ausgrid Logos
• Date of completion will be shown

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date

• Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).

  
  

• For ASP1 individuals - Expiry date in Pegasus should be recorded as the date which is calculated to be 1 year from the Date of training completion
• For ASP2 individuals – No expiry date

Pegasus Staff click here to read additional crucial business rule information prior to file verification

• Applicants name to be shown on documentation
• Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
• Course code to be listed on certificate to match the nominated coding and title within Onsite: M1398 - Streetlight Serving Worker Electrical (Electrically Trained and Qualified) also accepted is M1400 or TDDO1440
• No expiry

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date

• Applicants name to be shown on documentation
• Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
• Course code to be listed on certificate to match the nominated coding and title within Onsite: M1397 - Streetlight Serving Worker Electrical (Electrically Trained and Qualified) also accepted is M1400 or TTDO1400
• No expiry

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date

• Applicants name to be shown on documentation
•  Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
• Course code to be listed on certificate to match the nominated coding and title within Onsite: M1400 - Streetlight Serving Worker Electrical (Electrically Trained and Qualified) Or TTDO1400
• No expiry
• Please note M1400 supercedes M1397,M1398,M1399
• Also UET30612 Cert III ESI Power 
• Electricity Supply Industry Distribution (Powerline)
• UTT30301, UET30101,UET30206, UET 30209,UTT30301

Record the Issue date within Onsite:

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date

• Applicants name to be shown on documentation
• Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
• Course code to be listed on certificate to match the nominated coding and title within Onsite: M1425 - Pole Inspection and Treatment
• No expiry

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date

• Applicants name to be shown on documentation
• Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
• Course code to be listed on certificate to match the nominated coding and title within Onsite: M1425 - Pole Inspection and Treatment
• No expiry

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date

• Applicants name to be shown on documentation
• Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
• Course code to be listed on certificate to match the nominated coding and title within Onsite: M1429 - Handling Burnt CCA Poles
• No expiry

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date

•  Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.
• RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment.
• Recognised Training Institution’s name to be displayed on document.
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Completion date or issue date must be displayed
• Accepted Course Titles / Codes:
• Certificate III in ESI - Power Systems – Distribution (refer to Business Rule for equivalent course codes)
• Skills Passport with code;
  • 1399 - Luminaire Servicing Worker or
  • M1400 or
  • TIDO1440
• RIIWHS204D
• RIIWHS204E
• RTHS0001
• No expiry
• Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

• NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

  NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

• The date of completion on the evidence should be recorded as the Issue Date in Pegasus

• Expiry date = none

• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.
• RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment.
• Recognised Training Institution’s name to be displayed on document.
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Completion date or issue date must be displayed
• Accepted Course Titles / Codes:
• M1806 - Safe Working Aloft
• UET30621
• UET30619
• UET30612
• UET30209
• UET30206
• No expiry
• Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

• Applicants name to be shown on documentation
• Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
• Course code to be listed on certificate to match the nominated coding and title within Onsite: M1809 - Ausgrid - Pre-working aloft procedures (NS146) 
• Other Accepted Competencies are :

1. Ausgrid will accept M1397 - Streetlight Serving Worker Electrical. 
2. M1809 and TTDO1809 are equivalent 

• No expiry

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date

• Applicants name to be shown on documentation
• Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
• Course code to be listed on certificate to match the nominated coding and title within Onsite: M2170 – Cable Pit Safety and Awareness
• No expiry

Upload Requirements:

Record the Issue date within Onsite:

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date

• Applicants name to be shown on documentation
• Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
• Course code to be listed on certificate to match the nominated coding and title within Onsite: QUAL00066 - GIS Map Reading
• No expiry

Pegasus LMS Issued Certificate:

• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Certificate will show completion of: GIS Map Reading
• Certificate will show both Pegasus and Ausgrid Logos
• Date of completion will be shown

Passbook Stamps:

• SG 4000 GIS Map Reading written on Passbook is acceptable.

NOTE: If there is a signed sticker instead of a stamp with the trainers name with the relevant competency listed, it can be approved

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date

Working Near Ausgrid Cables Assessment

Pegasus LMS Issued Certificate:

• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Certificate will show completion of: Working Near Ausgrid Cables Assessment
• Certificate will show both Pegasus and Ausgrid Logos
• Date of completion will be shown
• Expiry 12 Months from Issue Date

Passport Stamps:

• Working Near Ausgrid Cables Assessment written on training passport is acceptable.

NOTE: If there is a signed sticker instead of a stamp with the trainers name with the relevant competency listed, it can be approved

Record the Issue date within Onsite:

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed, please enter this as the issue date

Expiry date: 12 Months from Expiry Date

Pegasus LMS Issued Certificate:

• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Certificate will show completion of: Working Near Ausgrid Cables Refresher
• Certificate will show both Pegasus and Ausgrid Logos
• Date of completion will be shown
• No expiry

Passport Stamps:

Working Near Ausgrid Cables Refresher written on training passport is acceptable.

NOTE: If there is a signed sticker instead of a stamp with the trainers name with the relevant competency listed, it can be approved

Record the Issue date within Onsite:

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed, please enter this as the issue date

• Applicants name to be shown on documentation
• Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)

Accepted Form/s of Evidence:

1. Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:

• Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant

• Uploaded document must include page of passport that shows 'SC1100' ‘SC1100A’ OR 'SC1200' OR 'Work w Live PowerCables in EA' OR 'Working Near Underground Cable' OR 'Working Near U/G Assets' for evidence of Working Near Underground Cables as having been achieved with:
  
  • Ausgrid / Energy Australia stamp being shown on this page
  • Date of Training
  • Trainer / Assessor Name
  • Signature

NOTE: If there is a signed sticker instead of a stamp with the trainers name with the relevant competency listed, it can be approved

2. Tafe issued certificate showing completion of 'Work Safely Near Underground Assets - 26919' course

3. RTO issued Card or Certificate showing completion of course in Working Safely Near overhead and underground assets

4. Pegasus LMS Issued Certificate:

• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Certificate will show completion of: Working Near Or Around Underground Cables
  
• Certificate will show both Pegasus and Ausgrid Logos
• Date of completion will be shown

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date

• Applicants name to be shown on documentation
• Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
• Accepted forms of evidence:
  • Ausgrid issued certificate showing completion of SSAB1001 - Ausgrid - Asbestos Awareness
  • RTO issued Statement of Attainment showing completion of 'Conduct asbestos assessment associated with removal' (accepted as this is a higher qualification)
  • RTO issued Statement of Attainment showing completion of 'Remove Friable Asbestos' (accepted as this is a higher qualification
  • NSW Workcover issued licence for 'Asbestos Assessor'
• NOT Accepted forms of evidence:
  • Non-RTO Issued certificate of completion showing 'Asbestos Awareness in the Workplace' or 'Asbestos Awareness'
    

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date

• Expiry date - 12 months from Issue Date

•  Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.
• Recognised Training Institution’s name to be displayed on document.
• Completion date or issue date must be displayed
• Accepted Course Titles / Codes:

• Front End Loader Authorisation
• FLT_LL_AUTH

• No Expiry
• Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

For Ausgrid Training Passport

Uploaded document must also include page of passport that shows ‘Front End Loader Authorisation’ or ‘FLT_LL_AUTH’ as having been achieved with:

• Ausgrid / Energy Australia stamp being shown on this page
• Date of Training
• Trainer / Assessor Name

• Signature

NOTE: If there is a signed sticker instead of a stamp with the trainers name with the relevant competency listed, it can be approved

For Pegasus LMS Issued Certificate:

• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Certificate will show completion of: FLT_LL_AUTH or Front End Loader Authorisation
• Certificate will show both Pegasus and Ausgrid Logos
• Date of completion will be shown

• The date of completion on the evidence should be recorded as the Issue Date in Pegasus

• Expiry date = None

•  Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.
• Recognised Training Institution’s name to be displayed on document.
• Completion date or issue date must be displayed
• Accepted Course Titles / Codes:
  • RTLW Standing Pole (Contractors)
• 12 Month Expiry from Issue date
• Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

For Ausgrid Training Passport

Uploaded document must also include page of passport that shows ‘RTLW Standing Pole (Contractors)’ as having been achieved with:

• Ausgrid / Energy Australia stamp being shown on this page
• Date of Training
• Trainer / Assessor Name
• Signature

NOTE: If there is a signed sticker instead of a stamp with the trainers name with the relevant competency listed, it can be approved

For Pegasus LMS Issued Certificate:

• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Certificate will show completion of: RTLW Standing Pole (Contractors)
• Certificate will show both Pegasus and Ausgrid Logos
• Date of completion will be shown

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

• Applicants name to be shown on documentation
• Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
• Course code to be listed on certificate to match the nominated coding and title within Onsite: TTDO1374 - Introduction to overhead line components
• No expiry

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date

• Applicants name to be shown on documentation
• Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
• Course code to be listed on certificate to match the nominated coding and title within Onsite: TTDO1375 - Line inspection
• No expiry

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date

• Applicants name to be shown on documentation
• Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
• Course code to be listed on certificate to match the nominated coding and title within Onsite: TTDO1399 - Luminaire Servicing Worker
• M1400 is accepted as this supersedes TTDO1399.
• No expiry

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date

• Applicants name to be shown on documentation
• Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
• Course code to be listed on certificate to match the nominated coding and title within Onsite: TTDO1570 - Ausgrid - Application of temporary insulation
• No expiry
• To be accepted if 1570 is shown 

NOTE: Ausgrid will accept Certificate III in ESI Power Systems - Distribution Overhead UET30612 or Ausgrid will also accept the Certificate III ESI Distribution (UET30209)

Also Accepted :

1. Electricity Supply Industry Distribution (Powerline)
2. UTT30301, UET30101,UET30206, UET 30209,UTT30301

NOTE: Ausgrid will accept Skills Passport code M1397 - Streetlight Servicing Worker Electrical

Australian Electricity Supply Industry (ESI) issued skills passport must show:

• Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
• loaded document must also include page of passport that shows ‘M1397 - Streetlight Servicing Worker Electrical’ as having been achieved with:
  • Ausgrid / Energy Australia stamp being shown on this page
  • Date of Training
  • Trainer / Assessor Name
  • Signature

NOTE: If there is a signed sticker instead of a stamp with the trainers name with the relevant competency listed, it can be approved

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date

• Applicants name to be shown on documentation
• Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
• Course code to be listed on certificate to match the nominated coding and title within Onsite: TTDO1804 - Ausgrid - Erection of Earths
• No expiry

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date

Pegasus LMS Issued Certificate:

• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Certificate will show completion of: TTGE1574 - Neutral and Phase Identification Using Test Lamps
• Certificate will show both Pegasus and Ausgrid Logos
• Date of completion will be shown
• No expiry

Passport Stamps:

• TTGE1574 - Neutral and Phase Identification Using Test Lamps written on training passport is acceptable.

NOTE: Ausgrid will accept:

• Certificate III in ESI - Power Systems - Distribution Overhead UET30612 (refer to Business Rule for equivalent course codes)

OR

• Skills Passport with code competency of 1804

OR

UETTDRRF11A or UETDRMP011 - Testing of Connections to LV Electricity Networks

NOTE: If there is a signed sticker instead of a stamp with the trainers name with the relevant competency listed, it can be approved

Record the Issue date within Onsite:

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed, please enter this as the issue date

• Applicants name to be shown on documentation
• Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
• Course code to be listed on certificate to match the nominated coding and title within Onsite: TTPO0003 - Private Pole and Aerial Mains Inspection: Bushfire Risks
• No expiry

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date

• Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.
• Actual copy of certificate is required. Letters are not accepted in lieu of this.
• Completion date or issue date must be displayed
• Course code to be listed on certificate to match the nominated coding and title within Onsite:
  • M2170 - Cable Pit Safety and Risk Awareness; or
  • TTDU2170 - Pit Entry Classroom
• No expiry

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

• Applicants name to be shown on documentation
• Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)

Pegasus LMS Issued Certificate:

• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Certificate will show completion of either: Connection of Installations to the LV Network (Service Testing)
• Certificate will show both Pegasus and Ausgrid Logos
• Date of completion will be shown

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Pegasus LMS Issued Certificate:

• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Certificate will show completion of: TTDU2170REF Pit Entry Refresher
• Certificate will show both Pegasus and Ausgrid Logos

Record the Issue date within Onsite:

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed, please enter this as the issue date

Pegasus LMS Issued Certificate:

• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Certificate will show completion of: Triple End Sealing
• Certificate will show both Pegasus and Ausgrid Logos

Record the Issue date within Onsite:

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed, please enter this as the issue date

• Name on Yellow Card to match the person registered
• Black and white or colour copy acceptable
• Must be issued by Elevating Work Platform Association of Australia (EWPA)
• Only the front of this licence is required to be displayed in the file upload
• Yellow Card to show the following information:
• Name
• Date of training
• EWP Type
• Licence Number
• Expiry date

• Pegasus LMS Issued Certificate: 

  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) 
  • Certificate will show completion of:WebGIS Environmental Layers training for Vegetation Contractors 
  • Certificate will show both Pegasus and Ausgrid Logos 
  • Date of completion will be shown 

Record the Issue date within Onsite: 

• Completion date - if listed on certificate (this completion date is always used when displayed) 
• Issue date - If only an issue date is listed, please enter this as the issue date 

No Expiry date.