Page History

Operator.Certificate of Competency.Jarraf operator

• Applicants name to be shown on documentation
• Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
• RTO Name, National Provider Code / RTO Number & Logo to be displayed on document
• Completion date or issue date must be displayed
• Course code to be listed on certificate to match the nominated coding and title within Onsite
• Name and / or signature of issuer
• Document / Certificate / Number

• Record the Issue date within Onsite:

Completion date - if listed on certificate (this completion date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

• Name on card to match the person registered
• Class / Code LL LE to be listed and matched to competency selection accordingly
• Black and white or colour acceptable
• Only the front of this licence is required to be displayed in the file upload as long as all relevant information is shown. 

• Issue and Expiry date to be recorded within Onsite as reflected on the evidence

Operator Front End Loader Licence LL 

• Name on card to match the person registered
• Class / Code LL to be listed and matched to competency selection accordingly
• Black and white or colour acceptable
• Only the front of this licence is required to be displayed in the file upload as long as all relevant information is shown. 

• Issue and Expiry date to be recorded within Onsite as reflected on the evidence

• Name on card to match the person registered
• Class / Code LL LB to be listed and matched to competency selection accordingly
• Black and white or colour acceptable
• Only the front of this licence is required to be displayed in the file upload as long as all relevant information is shown. 

• Issue and Expiry date to be recorded within Onsite as reflected on the evidence

• Name on card to match the person registered
• Class / Code LL LS to be listed and matched to competency selection accordingly
• Black and white or colour acceptable
• Only the front of this licence is required to be displayed in the file upload as long as all relevant information is shown. 

• Issue and Expiry date to be recorded within Onsite as reflected on the evidence

• Name on Licence to match the person registered
• Class / Codes VL, SL, BL, TL, TM and/or AB to be listed and match competency selection accordingly
• Predominantly black and yellow in colour
• Must be issued by EWPA – Elevating Work Platform Association

• Date of training and Expiry date to be recorded within Onsite as reflected on Licence Yellow card

• Applicants name to be shown on document
• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
• RTO Name, Code and Logo
• Units of competency code and name. Acceptable codes and names are:
• RIIMPO324 – Conduct civil construction grader operations
• AHCMOM206 – Conduct Grader operations
• RIIMPO310 – Conduct Grader operations
• RIIMPO307 – Conduct wheel grader operations in underground mines

NOTE: Unit of competency code that is shown in competency naming convention must be shown on evidence (if there is one shown) Or any previous superseded equivalent course codes, which are usually indicated by a letter at the end of the code, shown against the mapping of this course on training.gov.au

• Date of completion or issue date must be shown
• Authorised person name or title (does not necessarily need a signature)
• Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
• Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

Click HERE for Internal Process on acceptance of superseded unit of competency

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency, or industry accepted “LG” code, as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

• Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

• Expiry date is not required

• Applicants name to be shown on document
• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
• RTO Name, Code and Logo
• Units of competency code and name. Acceptable codes and names are:
• RIIMPO318 – Conduct civil construction skid steer loader operations
• RIIMPO334 – Conduct skid steer loader operations using attachments
• RIIMPO335 – Conduct skid steer loader operations without attachments
• CPCCDE3023 – Operate skid steer loaders at ground level on demolition sites
• FWPSS00067 – Skid steer loader operator

NOTE: Unit of competency code that is shown in competency naming convention must be shown on evidence (if there is one shown) Or any previous superseded equivalent course codes, which are usually indicated by a letter at the end of the code, shown against the mapping of this course on training.gov.au

• Date of completion or issue date must be shown
• Authorised person name or title (does not necessarily need a signature)
• Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
• Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

Click HERE for Internal Process on acceptance of superseded unit of competency

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency, or industry accepted “LS” code, as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

• Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

• Expiry date is not required

• Applicants name to be shown on document
• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
• RTO Name, Code and Logo
• Units of competency code and name. Acceptable codes and names are:
• RIIMPO320 – Conduct civil construction excavator operations
• AHCMOM208 – Conduct excavator operations
• SIFCBCR015 – operate a backhoe, front-end loader or excavator
• RIIMPO301 – Conduct hydraulic excavator operations

NOTE: Unit of competency code that is shown in competency naming convention must be shown on evidence (if there is one shown) Or any previous superseded equivalent course codes, which are usually indicated by a letter at the end of the code, shown against the mapping of this course on training.gov.au

• Date of completion or issue date must be shown
• Authorised person name or title (does not necessarily need a signature)
• Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
• Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

Click HERE for Internal Process on acceptance of superseded unit of competency

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency, or industry accepted “LE” code, as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

• Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

• Expiry date is not required

• Applicants name to be shown on document
• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
• RTO Name, Code and Logo
• Units of competency code and name. Acceptable codes and names are:
• RIIMPO316 – Conduct self-propelled Compactor operations
• RIIMPO205 – Operate roller/compactor
• RIIMPO201 – Operate roller/compactor underground

NOTE: Unit of competency code that is shown in competency naming convention must be shown on evidence (if there is one shown) Or any previous superseded equivalent course codes, which are usually indicated by a letter at the end of the code, shown against the mapping of this course on training.gov.au

• Date of completion or issue date must be shown
• Authorised person name or title (does not necessarily need a signature)
• Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
• Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

Click HERE for Internal Process on acceptance of superseded unit of competency

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency, or industry accepted “LC” code, as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

• Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

• Expiry date is not required

• Applicants name to be shown on document
• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
• RTO Name, Code and Logo
• Units of competency code and name. Acceptable codes and names are:
• RIIMPO317 – Conduct roller operations
• RIIMPO205 – Operate roller/compactor
• RIIMPO201 – Operate roller/compactor underground

NOTE: Unit of competency code that is shown in competency naming convention must be shown on evidence (if there is one shown) Or any previous superseded equivalent course codes, which are usually indicated by a letter at the end of the code, shown against the mapping of this course on training.gov.au

• Date of completion or issue date must be shown
• Authorised person name or title (does not necessarily need a signature)
• Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
• Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

Click HERE for Internal Process on acceptance of superseded unit of competency

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency, or industry accepted “LR” code, as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

• Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

• Expiry date is not required

• Applicants name to be shown on document
• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
• RTO Name, Code and Logo
• Units of competency code and name

NOTE: Unit of competency code that is shown in competency naming convention must be shown on evidence (if there is one shown) Or any previous superseded equivalent course codes shown against the mapping of this course on training.gov.au

• Date of completion or issue date must be shown
• Authorised person name or title (does not necessarily need a signature)
• Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
• Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

Click HERE for Internal Process on acceptance of superseded unit of competency

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

Avetta verifiers click here for additional business rule information prior to verification of this competency

• Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

• Expiry date is not required

EWP<11m.Statement of atainment.RIIHAN301 - Operate Elevating Work Platform

Operator.Statement of Attainment.RIIHAN311 - Conduct operations with integrated tool carrier

Operator.Statement of Attainment.RIIMPO206 - Conduct bulk water truck operations

Operator.Statement of Attainment.RIIMPO315 - Conduct tractor operations

Operator.Statement of Attainment.RIIMPO316 - Conduct self-propelled compactor operations

Operator.Statement of Attainment.RIIMPO319 - Conduct backhoe/loader operations

LB

Operator.Statement of Attainment.RIIMPO321 - Conduct civil construction wheeled front end loader operations

LL

Operator.Statement of Attainment.RIIMPO322 - Conduct civil construction tracked front end loader operations

LL

Operator.Statement of Attainment.RIIMPO323 - Conduct civil construction dozer operations

AHCMOM209 accepted

Operator.Statement of Attainment.RIIMPO325 - Conduct civil construction scraper operations

Operator.Statement of Attainment.RIIMPO326 - Conduct civil construction water cart operations

Operator.Statement of Attainment.RIIMPO336 - Conduct belly dump truck operations

Operator.Statement of Attainment.RIIMPO337 - Conduct articulated haul truck operations

Operator.Statement of Attainment.RIIMPO338 - Conduct rigid haul truck operations

Operator.Statement of Attainment.RIIVEH304 - Conduct tip truck operations