Page tree
Skip to end of metadata
Go to start of metadata

 Certificates

CompetencyCompetency RequirementsUpload RequirementsExamples

Electrical.Certificate.High Voltage Switching

  • Applicants name must be displayed on the Licence
  • High voltage switching should be displayed on the certificate
  • Black and white OR colour copy of this document is accepted
  • Record the date of completion as the issue date in Onsite 

 Licences

CompetencyCompetency RequirementsUpload RequirementsExamples

Electrical.Licence.Electrical Licence

  • Applicants name must be displayed on the Licence
  • 'Supervisors Certificate' Licence is accepted
  • Licence must show competency as electrician
  • Licence must be in date / valid
  • Black and white OR colour copy of this document is accepted
  • Only front side of electrical licence is required
  • Must be clear and legible
  • Licence must be issued by relevant Australian State Government Authority
    For Queensland: QLD Government is Issuer
    For NSW: NSW Department of Fair Trading is issuer
    For Victoria: EnergySafe VIC is issuer
    For WA: Electrical Licencing Board or Energysafe WA
    For NT: NT Government
    For Tas:TAS department of Justice
    For SA: South Australia Government

    Please note: A provisional licence is not acceptable as evidence for a full electrical licence.
  • If there is an issue date shown on the licence, record this as the issue date in Onsite 
  • Record the licence expiration date as the competency expiration date in Onsite

Electrical.Licence.NSW - Electrical Licence
  • Applicants name must be displayed on the Licence
  • Licence must show competency in an electrical qualification
  • Licence must be in date / valid
  • Licence must be issued by relevant NSW Australian State Government Authority
  • Black and white OR colour copy of this document is accepted
  • Only front side of electrical licence is required
  • Must be clear and legible

    Please note: A provisional licence is not acceptable as evidence for a full electrical licence.
  • If there is an issue date shown on the licence, record this as the issue date in Onsite 
  • Record the licence expiration date as the competency expiration date in Onsite

Electrical.Licence.VIC - Electrical Licence
  • Applicants name must be displayed on the Licence
  • Licence must show competency as electrician
  • Licence must be in date / valid
  • Licence must be issued by relevant VIC Australian State Government Authority
  • Black and white OR colour copy of this document is accepted
  • Only front side of electrical licence is required
  • Must be clear and legible

    Please note: A provisional licence is not acceptable as evidence for a full electrical licence.
  • If there is an issue date shown on the licence, record this as the issue date in Onsite 
  • Record the licence expiration date as the competency expiration date in Onsite

 

Electrical.Licence.WA - Electrical Licence
  • Applicants name must be displayed on the Licence
  • Licence must show competency as electrician
  • Licence must be in date / valid
  • Licence must be issued by relevant WA Australian State Government Authority
  • Black and white OR colour copy of this document is accepted
  • Only front side of electrical licence is required
  • Must be clear and legible

    Please note: A provisional licence is not acceptable as evidence for a full electrical licence.
  • If there is an issue date shown on the licence, record this as the issue date in Onsite 
  • Record the licence expiration date as the competency expiration date in Onsite

 

Electrical.Licence.QLD - Electrical Licence
  • Applicants name must be displayed on the Licence
  • Licence must show competency as electrician
  • Licence must be in date / valid
  • Licence must be issued by relevant QLD Australian State Government Authority
  • Black and white OR colour copy of this document is accepted
  • Only front side of electrical licence is required
  • Must be clear and legible

    Please note: A provisional licence is not acceptable as evidence for a full electrical licence.
  • If there is an issue date shown on the licence, record this as the issue date in Onsite 
  • Record the licence expiration date as the competency expiration date in Onsite

Electrical.Licence.Electrical Lineperson Licence

  • Applicants name must be displayed on the Licence
  • Licence must show competency as Electrical Linesperson Licence
  • Licence must be in date / valid
  • Licence must be issued by relevant Australian State Government Authority
  • Black and white OR colour copy of this document is accepted
  • Only front side of electrical licence is required
  • Must be clear and legible
  • If there is an issue date shown on the licence, record this as the issue date in Onsite 
  • Record the licence expiration date as the competency expiration date in Onsite
 

Electrical Fitting.Licence.Electrical Fitter Licence

  • Applicants name must be displayed on the Licence
  • Licence must show competency as Electrical Fitter
  • Licence must be in date / valid
  • Licence must be issued by relevant Australian State Government Authority
  • Black and white OR colour copy of this document is accepted
  • Only front side of electrical licence is required
  • Must be clear and legible
  • If there is an issue date shown on the licence, record this as the issue date in Onsite 
  • Record the licence expiration date as the competency expiration date in Onsite

Cabler.Licence.Electrical Jointer Licence

  • Applicants name must be displayed on the Licence
  • Licence must show competency as Electrical Cable Jointer
  • Licence must be in date / valid
  • Licence must be issued by relevant Australian State Government Authority
  • Black and white OR colour copy of this document is accepted
  • Only front side of electrical licence is required
  • Must be clear and legible
  • If there is an issue date shown on the licence, record this as the issue date in Onsite 
  • Record the licence expiration date as the competency expiration date in Onsite
Electrical.Licence.QLD Electrical Mechanic Licence
  • Applicants name must be displayed on the Licence
  • Licence must show competency as QLD Electrical Mechanic Licence
  • Licence must be in date / valid
  • Licence must be issued by relevant Australian State Government Authority
  • Black and white OR colour copy of this document is accepted
  • Only front side of electrical licence is required
  • Must be clear and legible

  • If there is an issue date shown on the licence, record this as the issue date in Onsite 
  • Record the licence expiration date as the competency expiration date in Onsite
Electrical.Certificate.Spotter Registration Certificate - Energysafe Victoria
  • Applicants name must be displayed on the Licence
  • Licence must show Spotter Registration Certificate
  • Licence must be in date / valid
  • Licence must be issued by relevant Australian State Government Authority (ENERGYSAFE VICTORIA)
  • Black and white OR colour copy of this document is accepted
  • Only front side of electrical licence is required
  • Must be clear and legible

  • If there is an issue date shown on the licence, record this as the issue date in Onsite 
  • Record the licence expiration date as the competency expiration date in Onsite

Page Version: 28

Note: This Document is not version controlled when printed.

  • No labels